工频感应加热线圈的设计与应用
Design and Application of Main-Frequency Inductive Coil
摘要:
本文介绍了一种工频电流的感应线圈设计方法。由于其设备投资不大、没有环境污染、且便于进行工艺控制,具有明显的技术优点。利用工频感应加热技术把钢铁加热到不太高的温度(指钢铁磁性变态点以下)可用于树脂加工、合成橡胶生产等,本文针对这种应用范围,进行了在圆筒形钢铁表面上产成不同功率比分布的感应线圈设计。
Abstract: This paper will introduce an inductive coil design method using main-frequency that will improve efficiency. The heat treatment process has many advantages, such as low initial investment; affordable equipment, eco friendly, mechanized process control and production arrangement. Steel heating can be used for the production of numerous goods including plastic and rubber processing. This paper contains in-depth research concerning inductive coil design that highlights the different specific rate of work on the steel cylinder surface.
参考文献
[1]
|
吴东勇 (2003) 大功率、大口径铜棒工频感应加热炉.河南江河工业有限责任公司, 河南.
|
[2]
|
李桂变 (2006) 感应加热新技术的应用及探讨. 山西侯马风雷机械制造责任有限公司, 山西.
|
[3]
|
宫德福 (1993) 节能型工频感应加热装置. 吉林化学工业公司电石厂, 吉林.
|
[4]
|
付正博 (2008) 感应加热与节能–感应加热器(炉)的设计与应用. 五洲工程设计研究院, 北京.
|
[5]
|
Dahake, G.S. (2006) Race of induction heating in lean manufac- turing. Heat Treating Progress, 5-6, 31-36.
|
[6]
|
Lasday, S.B. (1991) Work progressing for continuous annealing of sheet by transverse flux induction heating at steel plant. Industrial Heating, 10, 43-45.
|
[7]
|
王贤晖 (2012) 加热炉内钢坯传热的数值模拟与优化的研究. 华中科技大学, 武汉.
|
[8]
|
田宏伟 (1999) 加热炉钢坯温度场智能预报系统研究. 昆明理工大学, 昆明.
|
[9]
|
罗晓春 (2009) 熔锌工频有芯感应炉电磁场和温度场的数值仿真研究. 中南大学, 长沙.
|
[10]
|
陈超样 (2013) Solidwork Simulation高级教程. DS Solidworks公司, 上海.
|
[11]
|
陈超样 (2013) Solidwork Flow Simulation教程. DS Solid- works公司, 上海.
|
[12]
|
杨甲沛 (2007) 基于自适应学习速率的改进型BP算法研究.天津大学电子信息工程学院, 天津.
|