聚合物驱剖面返转数值模拟方法研究
Research on Numerical Simulation Method of Section Inversion during Polymer Flooding
DOI: 10.12677/jogt.2016.381008, PDF, HTML, XML, 下载: 1,840  浏览: 4,189  国家科技经费支持
作者: 郑爱玲*, 刘德华*:长江大学石油工程学院,湖北 武汉 ;康晓东*:中海石油研究总院,北京
关键词: 聚合物驱剖面返转数值模拟物理实验返转机理;Polymer Flooding Profile Inversion Numerical Simulation Physical Experiment Inversion Mechanism
摘要:

非均质油藏聚合物单一段塞驱油过程中吸液剖面易发生返转,不利于提高采收率。针对室内物理模拟试验花费高、周期长、工作量大,常规数值模型难以描述聚合物驱剖面返转现象的问题,根据渗流理论、聚合物驱物化现象,建立了聚合物驱两层并联不窜流线性渗流模型;结合油藏数值模拟软件特点,提出了根据储层物性分区进行聚合物特征参数差异赋值的剖面返转数值模拟方法。采用建立的剖面返转数值模拟方法对油田聚合物驱剖面返转现象的影响因素进行了系统研究,结果表明,渗透率级差、注聚时机、聚合物质量浓度对聚合物剖面返转现象影响较大,为研究聚合物驱吸液剖面返转规律及减缓剖面返转现象提供技术支持。

The inversion of injection profile was easily induced in single slug injection in heterogeneous reservoirs; it was unfavorable for enhancing oil recovery. In allusion to the problems of high cost, long duration and heavy workload of laboratory simulation, which were hard to be described by conventional reservoir simulation, based on percolation theory and physical-chemical property in polymer flooding, an uncross flow linear percolation model of two parallel layers was established. Compared with the characteristics of simulation software, a simulation method for profile inversion was proposed based on the sorting of reservoir physical property. The studied method is used for systematically studying the factors influencing the profile inversion; the result shows that the permeability contrast, its injection time and its concentration are the major factors affecting the inversion; it provides a technical support for studying the regulation and the reduction of profile inversion in polymer flooding.

文章引用:郑爱玲, 康晓东, 刘德华. 聚合物驱剖面返转数值模拟方法研究[J]. 石油天然气学报, 2016, 38(1): 55-61. http://dx.doi.org/10.12677/jogt.2016.381008

参考文献

[1] 曹瑞波, 韩培慧, 侯维虹. 聚合物驱剖面返转规律及返转机理[J]. 石油学报, 2009, 30(2): 267-270.
[2] 徐新霞. 聚合物驱“吸液剖面反转”现象机理研究[J]. 特种油气藏, 2010, 17(2): 101-104.
[3] 曹瑞波. 聚合物驱剖面返转现象形成机理实验研究[J]. 油气地质与采收率, 2009, 16(4): 72-73.
[4] 张景存. 大庆油田三次采油试验研究[M]. 北京: 石油工业出版社, 1995: 3-10.
[5] 耿娜, 杨东东, 刘小鸿, 等. 渤海油田聚合物驱储层吸水剖面变化特征及影响因素研究[J]. 油天然气学报(江汉石油学院学报), 2013, 35(7): 127-130.
[6] 石京平, 杨清彦, 刘成芬, 等. 聚合物溶液吸附对油层物性影响的试验研究[J]. 石油天然气学报(江汉石油学院学报), 2005, 27(1): 224-227.
[7] 刘丽, 宋考平, 皮彦夫, 等. 水驱后聚合物驱全过程的相对渗透率曲线研究[J]. 油田化学, 2011, 28(1): 45-48.
[8] 卫敏, 李奔, 李卉, 等. 化学驱相对渗透率曲线特征[J]. 特种油气藏, 2010, 17(3): 101-103.
[9] 张晓华. 阻力系数对聚合物驱油效果的影响[J]. 特种油气藏, 2011, 18(3): 81-83.
[10] 徐婷, 李秀生, 莫文丽, 等. 聚合物不可入孔隙体积影响因素研究[J]. 石油大学学报(自然科学版), 2004, 28(3): 56-59.