无线温度采集预警系统设计
The Design of Wireless Temperature Acquisition Warning System
DOI: 10.12677/JSTA.2016.43013,
PDF, HTML, XML,
被引量
下载:
3,786 浏览:
8,631
科研立项经费支持
作者:
贺思婷, 马铭, 许晓容, 王爽, 彭志慧, 王秀英*, 夏明萍:北京联合大学自动化学院物流系,北京
关键词:
NRF24L01;1602液晶显示屏;DS18B20;STC89C52;预警;NRF24L01; 1602 LCD Screen; DS18B20; STC89C52; Warning
摘要: 本文介绍了采用温度传感器DS18B20采集温度、STC89C52单片机处理、LCD1602液晶显示、及NRF24L01无线收发一体模块组成的新型温度无线采集预警系统,该系统以STC89C52单片机为控制核心,利用温度传感器 DS18B20测量温度值,NRF24L01实现温度的传输。本系统分三个测温段,分别为:恒温运输18℃~22℃、冷藏运输0℃~7℃、冷冻运输−18℃~−22℃。在三个分段车厢内,一旦温度超过其上限值或下限值,接收端单片机便启动报警系统。该系统精度高、测温准确、报警及时,可广泛应用于冷藏车运输。
Abstract:
This paper introduces a new kind of wireless temperature acquisition using temperature sensor DS18B20 temperature acquisition, STC89C52 MCU processing, LCD1602 liquid crystal display, and nRF24L01 wireless transceiver integrated module is composed of a novel temperature collection and wireless early warning system is introduced in this paper, the system uses STC89C52 MCU as control core, using temperature sensor DS18B20 temperature measurement value, nRF24L01 achieve the temperature transmission. The system is divided into three measuring section, re-spectively: transportation with constant temperature of 18 degrees - 22 degrees C, refrigerated transport 0 DEG C - 7 DEG C, refrigerated transport −18 DEG C - −22 degrees. Repeated segments inside, once the temperature exceeds the upper or lower limit, the receiver chip will activate alarm system. The system has high precision, accurate temperature measurement and alarm, which can be widely used in the transport of refrigerated trucks.
参考文献
[1]
|
沈飞. 基于nRF24L01的无线温度监控系统设计[J]. 自动化应用, 2016(1): 34-46.
|
[2]
|
徐艳玲. 基于nRF24L01新型无线温度传感系统设计[J]. 软件工程师, 2015, 18(6): 32-34.
|
[3]
|
张军. 智能温度传感器DS18B20及其应用[J]. 仪表技术, 2010(4): 68-70.
|
[4]
|
陈中, 朱代忠. 基于STC89C52单片机的控制系统设计[M]. 北京: 清华大学出版社, 2015.
|
[5]
|
林嘉. 基于89S52的LCD1602程序设计[J]. 电脑知识与技术, 2012, 8(26): 6377-6378.
|
[6]
|
徐爱钧. Keil C51单片机高级语言应用编程与实践[M]. 北京: 电子工业出版社, 2013.
|
[7]
|
付先成, 高恒强, 蔡红娟. 单片机原理与C语言程序设计[M]. 武汉: 华中科技大学出版社, 2015.
|