车轮退化对HXD3型电力机车动力学性能的影响
Effects of Wheel Degradation on the Dynamics Performance of HXD3 Type Electric Locomotive
DOI: 10.12677/OJTT.2016.54013, PDF, HTML, XML, 下载: 1,879  浏览: 4,816  国家自然科学基金支持
作者: 吴华丽, 宋冬利*, 张卫华:西南交通大学牵引动力国家重点实验室,四川 成都;冯 强:天津电力机车有限公司技术中心,天津
关键词: HXD3型电力机车车轮退化动力学模型动力学性能工作区间HXD3 Electric Locomotive Wheel Degradation Dynamics Model Dynamic Performance Working Range
摘要: 本文是以HXD3型电力机车为研究对象,根据实测的轮对数据基于随机过程理论揭示不同运行里程下机车轮对退化的演变规律。在此基础上,建立了轮对退化的机车系统动力学模型,分析轮径、轮径差变化对机车动力学性能变化的影响。仿真结果表明:轮径差变化对车辆动力学性能的影响最大,在最大的运行速度120 km/h下,为保障机车运行稳定性,机车安全运行条件下不同里程机车轮径差的工作区间,初始轮径差不能超出7.66 mm,50万里程时轮径差不能超出7.18 mm,100万里程时轮径差不能超出7.21 mm。
Abstract: This paper is based on HXD3 electric locomotive as the research object, according to the experi-ment data of the wheel-set using stochastic process to reveal the evolution of degradation of the wheel under different running mileages. On this basis, the establishment of a locomotive wheel degraded system dynamics model to analyze the impact on the dynamic performance of locomotives when changing wheel diameter and wheel diameter difference. Simulation results show that the wheel diameter difference influences vehicle dynamics parameters mostly. Under the maximum running speed of 120 km/h, the operating of the wheel diameter difference of different mileage locomotives is guaranteed to ensure the stability of locomotive operation; initial wheel diameter difference can’t exceed 7.66 mm, 50-million mileage wheel diameter difference shouldn't exceed 7.18 mm, and 100-million mileage wheel diameter difference can't exceed 7.21 mm.
文章引用:吴华丽, 宋冬利, 张卫华, 冯强. 车轮退化对HXD3型电力机车动力学性能的影响[J]. 交通技术, 2016, 5(4): 99-110. http://dx.doi.org/10.12677/OJTT.2016.54013

参考文献

[1] 金学松, 刘启跃. 轨道摩擦学[M]. 北京: 中国铁道出版社, 2004: 1-8.
[2] 贾璐. 高速车辆动力学性能评价方法研究[D]: [硕士学位论文]. 成都: 西南交通大学, 2008.
[3] 李艳, 张卫华, 池茂儒, 周文祥. 车轮踏面外形及轮径差对车辆动力学性能的影响[J]. 铁道学报, 2010, 32(1): 104-108.
[4] 吴磊, 钟硕乔, 金学松, 李玲. 车轮多边形化对车辆运行安全性能的影[J]. 交通运输工程学报, 2011, 11(3): 47- 54.
[5] 孙善超, 王成国, 李海涛, 曾树谷. 轮/轨接触几何参数对高速客车动力学性能的影响[J]. 中国铁道科学, 2006, 27(5): 93-98.
[6] 翟婉明. 车辆–轨道耦合动力学(上册) [M]. 北京: 科学出版社, 2015.
[7] 罗仁, 曾京, 邬平波, 戴焕云. 高速列车车轮不圆顺磨耗仿真及分析[J]. 铁道学报, 2010, 32(5): 30-35.
[8] 崔大宾, 梁树林, 宋春元, 邓永果, 杜星, 温泽峰. 高速车轮非圆化现象及其对轮轨行为的影响[J]. 机械工程学报, 2013, 49(18): 8-15.
[9] 黄照伟, 崔大宾, 杜星, 金学松. 车轮偏磨对高速列车直线运行性能的影响[J]. 铁道学报, 2013, 35(2): 14-20.
[10] Van Chien, T. (越), 李芾, 戚壮, 丁军君. 机车车轮磨耗统计数据处理方法与镟修周期预测模型[J]. 铁道学报, 2015, 37(12): 14-19.
[11] 李裕奇, 刘赪, 王沁. 随机过程[M]. 北京: 国防工业出版社, 2012: 72-98.
[12] 铁道部标准计量研究所. TBT 2360-1993铁道机车动力学性能试验鉴定方法及评定标准[S]. 北京: 中华人民共和国铁道部, 1993.
[13] 国家标准局. GB/T5599-85铁道车辆动力学性能评定和试验鉴定规范[S]. 北京: 中国标准出版社, 1985.