数控铣床磁流变减振装置及半主动模糊控制
Semi-Active Fuzzy Control of the Magneto-Rheological Damping Device for CNC Milling Machine
DOI: 10.12677/MET.2016.54037, PDF, HTML, XML, 下载: 1,828  浏览: 3,366  科研立项经费支持
作者: 刘薇娜, 李春梅, 刘志刚:长春理工大学光电信息学院,吉林 长春
关键词: 数控铣床磁流变阻尼器减振模糊控制CNC Milling Machine Magneto-Rheological Damper Vibration Reduction Fuzzy Control
摘要: 机床振动是影响零件加工质量的主要原因,为此本文研制了可用于数控铣床的磁流变减振装置。本文在结构设计的基础上,并利用模糊控制算法对减振装置进行了基于磁流变阻尼减振器的机床系统控制研究,得出了较为满意的实验结果并作了相应的分析,验证了磁流变减振系统及算法的可行性。
Abstract: Machine tool vibration is the main reason resulting in machining quality of parts. In this paper, a magneto-rheological damping device for CNC milling machine was developed. On the basis of structural design, by using fuzzy control algorithm, vibration reduction device is studied based on the machine tool system of magneto-rheological dampers. Finally, a satisfied result is obtained. By analyzing the result, the feasibility of the vibration-control system and the algorithms is proved.
文章引用:刘薇娜, 李春梅, 刘志刚. 数控铣床磁流变减振装置及半主动模糊控制[J]. 机械工程与技术, 2016, 5(4): 307-314. http://dx.doi.org/10.12677/MET.2016.54037

参考文献

[1] 杨国安. 机械振动基础[M]. 北京: 中国石化出版社, 2012.
[2] 于英华, 徐兴强, 徐平. 切削颤振的在线监测与控制研究现状分析[J]. 振动与冲击, 2007, 26(1): 130-135.
[3] Yang, Y., Munoa, J. and Altintas, Y. (2010) Optimization of Multiple Tuned Mass Dampers to Suppress Machine Tool Chatter. International Journal of Machine Tools and Manufacture, 50, 834-842.
http://dx.doi.org/10.1016/j.ijmachtools.2010.04.011
[4] Mark, R.J., Jonathan, W.B. and Carlson, J.D. (1998) Properties and Applications of Commercial Magnetorheological Fluids. SPIE, 3327, 262-275.
[5] Einder, J.E., Dimock, G.A. and Werely, N.W. (2000) Design of a Magnetorheological Automotive Shock Absorber. SPIE, 3985, 426-437.
[6] Vavreck, A.N. (2000) Control of a Dynamic Vibration Absorber with Magnetorheological Damping. SPIE, 4073, 252- 263.
[7] 周云, 谭平. 磁流变阻尼控制理论与技术[M]. 北京: 科学出版社, 2007.
[8] Passino, K.M. and Yurkovich, S. (1998) Fuzzy Control. Addison Wesley Longman, Inc., Menlo Park.
[9] Xu, Z.-D. and Guo, Y.-Q. (2008) Neuro-Fuzzy Control Strategy for Earthquake-Excited Nonlinear Magnetorlieological Structures. Soil Dynamics and Earthquake Engineering, 28, 717-727.
http://dx.doi.org/10.1016/j.soildyn.2007.10.013
[10] Yu, Z.H., Liu, S.A. and Zhang, N. (2011) International Conference on Computer Science and Service System, CSSS 2011-Proceedings. IEEE Computer Society, Piscataway.
[11] 诸静, 等, 著. 模糊控制原理与应用[M]. 北京: 机械工业出版社, 2001.
[12] 张文修, 梁广锡, 编著. 模糊控制与系统[M]. 西安: 西安交通大学出版社, 1998.
[13] 欧进萍, 张吉礼. 模糊控制基本推理方法及其效果分析[J]. 哈尔滨建筑大学学报, 2000, 2(33): 1-7.
[14] 陈杰平, 冯武堂, 郭万山, 等. 整车磁流变阻尼器主动悬架变论域模糊控制策略[J]. 北京: 农业机械学报, 2011, 42(5): 7-13, 19.
[15] Song, X.B., Ahmadian, M., Southward, S., et al. (2005) An Adaptive Semiactive Control Algorithm for Magnetorheological Suspension Systems. Transactions of ASME, Journal of Vibration and Acoustics, 127, 493-450.
http://dx.doi.org/10.1115/1.2013295