高精度推动式管线测长系统研究与实现
Research and Implementation of High Precision Push-Type Pipeline Length Measurement System
摘要: 为加快我国钢铁工业转型升级，推进管线测长设备国产化，研发适合国内自动化生产线的管线测长产品，在对测长原理和系统组成分析的基础上，提出了推动式管线测长系统的设计方案；根据影响测量精度的关键因素分析误差产生原因及误差的性质特点，并探讨减小误差的方法；生产现场的实验证明，测长系统的精度可以满足国家标准要求。
Abstract:
In order to speed up the transformation and upgrading of China’s steel industry, promote the localization of pipeline measuring equipment, and develop pipeline length-measuring products suitable for the domestic automatic production line, the design scheme of the push-type length measurement system was put forward based on the analysis of the measuring principle and system composition. According to the key factors that affect the accuracy of the measurement, the causes and characteristics of error were analyzed, and the method of reducing the error was discussed. The experiments in the industrial field showed that the precision of the measuring system can meet the requirements of the national standard.
参考文献
|
[1]
|
单俊峰. 基于机电液一体化的钢管测长测控系统研究与实现[D]: [硕士学位论文]. 西安: 西安交通大学, 2008.
|
|
[2]
|
王双来. 石油钢管长度测量系统优化设计及误差分析[D]: [硕士学位论文]. 贵阳: 贵州大学, 2009.
|
|
[3]
|
彭在美. 以党的十八大科学发展观为指导我国钢管业要加快转型升级实现强国梦[J]. 钢管, 2013, 42(4): 1-6.
|
|
[4]
|
李强. 着力推进供给侧结构性改革全面提升钢管行业新常态下的生存发展能力[J]. 焊管, 2016, 39(5): 1-7.
|
|
[5]
|
唐土生, 陈绚青, 徐强. 温度对基于线阵CCD测长系统的影响[J]. 冶金自动化, 2011, 35(3): 72-75.
|
|
[6]
|
刘晶. 场效应晶体管生物传感器的设计与优化[D]: [硕士学位论文]. 武汉: 华中科技大学, 2008.
|
|
[7]
|
邓成钢, 项占琴. 高速点阵式脉冲喷射发生器无传感器控制[J]. 光学精密工程, 2012, 20(4): 752-759.
|
|
[8]
|
陈振林, 杨小涛, 周庆福. 温度, 风速对湿度传感器响应时间影响的研究[J]. 国外电子测量技术, 2012, 31(6): 19- 22.
|
|
[9]
|
Abdallah, S. and Nijmeh, S. (2004) Two Axes Sun Tracking System with PLC Control. Energy Conversion & Management, 45, 1931-1939.
|
|
[10]
|
申健博, 王瑾. 以传感器技术为基础的机电自动化控制探究[J]. 中国新技术新产品, 2017(2): 11-12.
|
|
[11]
|
王娟. 六分力测试系统误差研究[D]: [硕士学位论文]. 南京: 南京理工大学, 2004.
|