某高压瓷柱式断路器抗震性能分析研究
Analysis of Aseismic Capacity of High Voltage Breaker for Porcelain Column Type
DOI: 10.12677/JEE.2017.52015, PDF, HTML, XML, 下载: 1,378  浏览: 4,083  科研立项经费支持
作者: 董新峰, 王 昊, 任建兴：上海电力学院能源与机械工程学院，上海；黄铁铮：国网山西省电力公司经济技术研究院，山西 太原；朱全军：全球能源互联网研究院，北京；曹枚根：中国电力科学研究院，北京
关键词: 高压断路器；抗震能力；模态分析；High Voltage Breaker； Aseismic Capacity； Modal Analysis
摘要: 针对瓷柱式高压断路器抗震能力较为薄弱的问题，以某型高压断路器为研究对象，开展其抗震及减震性能分析研究，旨在确保高压断路器在地震发生时的无破坏性。文中基于ANSYS开展某型高压断路器模态分析研究，获得断路器的固有频率和模态振型，确定断路器易损坏的部位；根据美国变电站抗震设计推荐规程IEEE Std-693-2005和高压开关设备抗地震性能试验GB/T13540-2009要求，选用天然Elcentro波和Taft波对高压断路器进行水平激励，开展易损坏部位的位移和应力时程分析，确定其最大位移和最大应力，为断路器的抗震设计优化提供技术支撑。
Abstract: According to the weakness character of seismic capacity of high voltage breaker and ensuring no damage at the time of the earthquake, the breaker is used as research object to carry out the aseismic capacity and seismic Isolation analysis. Firstly, the modal analysis of high voltage brea- ker is carried out, the natural frequency and mode shape of the breaker are calculated, and the easily damaged parts of high voltage breaker are determined. Secondly, according to the stan-dards of the IEEE Std-693-2005 and GB/T 13540-92, natural Elcentro wave and Taft wave are used to carry out the level excitation of the high voltage breaker, and the time history analysis of the displacement and stress of the vulnerable parts of breaker are carried out, and the maximum displacement and maximum stress of vulnerable parts are determined. The above research can provide technical support for the seismic design optimization of the breaker.
文章引用：董新峰, 黄铁铮, 朱全军, 曹枚根, 王昊, 任建兴. 某高压瓷柱式断路器抗震性能分析研究[J]. 电气工程, 2017, 5(2): 126-133. https://doi.org/10.12677/JEE.2017.52015

参考文献

[1] 刘洋. 变电站电气设备抗震、基础减隔震分析研究[D]: [硕士学位论文]. 石家庄: 石家庄铁道大学, 2015.
[2] 范荣全, 曹枚根, 卓越, 等. 高压断路器抗震能力分析及抗震减震措施[J]. 高压电器, 2012, 48(3): 12-16.
[3] 邵锡杰. 高压瓷柱式断路器的抗震性能分析与隔震研究[D]: [硕士学位论文]. 苏州: 苏州科技学院, 2015.
[4] Rolf, H. (1991) Evaluation of the Effect of Mechanical Operations on Seismic Qualification Test of SF6 Circuit Breakers. Proceedings of the 1991 IEEE Power Engineering Society Transmission and Distribution Conference, Dallas, 473-477.
[5] Girodet, A. (1989) Seismic Behavior of “CANDLE” Type SF6 Outdoor Circuit Breakers and Associated SF6 Insulated Current Transformers. IEEE Transactions on Power Delivery, 4, 2100-2108.
https://doi.org/10.1109/61.35636
[6] Amir, M., Kuhner, A., Reinhardt, M. and Manea, I. (1998) Seismic Qualification of High-Voltage Substations (420KV Circuit Breakers with Coupled Poles). Optimization of Electrical and Equip-ments.
[7] Robin-Jouan, P., Dufournet, D. and Montillet, G.F. (2006) Digital Analysis of the Breakdown Process in High-Voltage Circuit Breakers. 2005/2006 IEEE PES Transmission and Distribution Conference and Exhibition, Dallas, 986-991.
[8] Mosalam, K.M. (2014) Seismic Performance Evaluation of High Voltage Disconnect Switches Using Real-Time Hybrid Simulation: I. System Development and Validation. Earthquake Engineering & Structual Dynamics, 43, 1205- 1222.
https://doi.org/10.1002/eqe.2395
[9] 李亚琦. 电瓷型高压电气设备体系抗震性能分析[D]: [博士学位论文]. 北京: 中国地震局地球物理研究所, 2002.
[10] 郭振岩. 变压器抗地震性能的研究[D]: [博士学位论文]. 沈阳: 沈阳工业大学, 2005.
[11] 尤红兵, 赵凤新. 瓷柱式SF6高压断路器抗震性能分析[J]. 震灾防御技术, 2010, 5(4): 418-427.
[12] 张雪松, 代泽兵, 曹枚根, 等. 安装新型铅减震器的220kV断路器振动台试验[J]. 高压电器, 2011, 47(8): 14-17.
[13] 谢强, 朱瑞元, 周勇, 等. 220kV隔离开关地震模拟振动台试验[J]. 电网技术, 2012, 36(9): 262-267.
[14] 武胜斌, 金松安, 陈刚, 等. 252kV瓷柱式断路器在AG5条件下的抗震研究[J]. 高压电器, 2013(8): 96-101.