Brønsted酸性离子液体催化Biginelli反应合成3,4-二氢嘧啶-2(1H)-(硫)酮类化合物
Brønsted Acid Ionic Liquid Catalyzed Biginelli Reaction to Synthesize 3,4-Dihydropyrimidine-2(1H)-(Thio)ones Compounds
DOI: 10.12677/SSC.2018.62005, PDF, HTML, XML,    国家自然科学基金支持
作者: 郭瑞, 刘秀梅, 刘晨江*：石油天然气精细化工教育部&自治区重点实验室，新疆大学化学化工学院，新疆 乌鲁木齐
关键词: 离子液体；Biginelli反应；催化；3；4-二氢嘧啶-2(1H)-(硫)酮；Ionic Liquid； Biginelli Reaction； Catalysis； 3；4-Dihydropyrimidine-2(1H)-(Thio)ones
摘要: 离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐催化芳香醛、1,3-二羰基化合物和脲或硫脲发生Biginelli反应合成了一系列3,4-二氢嘧啶-2(1H)-(硫)酮类化合物。本实验方法操作简单、反应条件温和、后处理方便。离子液体催化剂重复使用6次后，产率无明显变化。
Abstract: A series of 3,4-dihydropyrimidine-2(1H)-(thio)ones were synthesized via the Biginelli reaction of aromatic aldehydes, 1,3-dicarbonyl compounds and urea or thiourea catalyzed by ionic liquid 4-phenyl-3-(3-sulfopropyl)tetrahydrothiazole-2-thione hydrogen sulfate. The experiment method has the advantages of simple operation, mild reaction condition, and convenient treatment. When the ionic liquid catalyst was reused for 6 times, the yield had no obvious change.
文章引用：郭瑞, 刘秀梅, 刘晨江. Brønsted酸性离子液体催化Biginelli反应合成3,4-二氢嘧啶-2(1H)-(硫)酮类化合物[J]. 合成化学研究, 2018, 6(2): 29-36. https://doi.org/10.12677/SSC.2018.62005

1. 引言

1893年，意大利化学家Biginelli首次用浓盐酸作为催化剂，用“一锅法”合成了3,4-二氢嘧啶-2-酮衍生物(DHPMs)，并将此反应命名为Biginelli反应。上世纪90年代Kappe [1] 对DHPMs进行了详细的综述，研究表明DHPMs具有抗病毒、抗菌、消炎、抗肿瘤等重要的生理和药理活性 [2] 。

用浓盐酸为催化剂的传统合成方法存在环境污染、反应时间长、腐蚀设备等缺点。为了克服这些弊端，研究者改进和优化了Biginelli反应的合成方法，如微波促进法 [3] 、超声促进法 [4] 、研磨合成法 [5] 、固相合成法 [6] 、路易斯酸催化 [7] 、碱催化 [8] 、离子液体催化 [9] 、有机小分子催化 [10] 等。上述研究丰富了Biginelli反应的合成方法，获得了高产率的产物。基于3,4-二氢嘧啶-2(1H)-酮衍生物的重要性，我们实验室在前期研究Biginelli反应的基础上 [11] ，将离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐应用于催化Biginelli反应，并考察了不同反应条件对Biginelli反应的影响，同时对催化剂重复使用性进行了研究。

2. 实验部分

2.1. 仪器与试剂

美国Varian inova-400型核磁共振仪(TMS为内标，D2O或DMSO-d6为溶剂)；美国HP1100液相色谱质谱仪；德国Bruker Equinox 55红外光谱仪(KBr压片)；瑞士Buchi B-540型熔点仪；上海嘉鹏ZF5型手提式紫外分析仪。所用试剂均为市售分析纯，用前未经处理。

2.2. 离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐(IL)的合成

将17 mmol 4-苯基-四氢噻唑-2-硫酮 [12] 与17 mmol 1,3-丙烷磺酸内酯溶解在乙酸乙酯溶液中，在90˚C油浴中加热回流反应12 h，过滤，固体用乙腈和乙酸乙酯洗涤滤饼，干燥，用玛瑙研钵研细，即得到纯净的4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮内盐，白色固体，产率：81%，熔点：240˚C~242˚C。

将20 mmol 4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮内盐与20 mmol 98%浓硫酸在100˚C加热反应24 h，冷却后将产物用乙醚(3 × 10 mL)浸泡洗涤，然后在70˚C下真空干燥10 h，得到褐色粘稠状离子液体，产率：81%。

离子液体表征如下：

4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐(IL)：褐色粘稠状液体，1H NMR (D2O, 400 MHz) δ (ppm) = 2.21~2.30 (m, 2H, CH2), 2.99~3.07 (m, 2H, CH2), 3.50 (t, 2H, CH2, J = 7.3 Hz), 3.75 (dd, 1H, CH, J = 11.7, 8.8 Hz), 4.18 (dd, 1H, CH, J = 11.7, 9.1 Hz), 5.79 (t, 1H, CH, J = 9.0 Hz), 7.39~7.50 (m, 5H, ArH); 13C NMR (D2O, 100 MHz): δ (ppm) = 24.80, 34.67, 40.55, 49.62, 70.97, 127.27, 127.81, 129.99, 130.12, 130.45, 136.46, 195.26; IR (KBr), υmax/cm−1: 3111, 3014, 1715, 1540, 1456, 1209, 1166, 1039, 900, 769, 699; m/z (%) = 318 (100) [M]+, 97 (100) [M]−。

2.3. 3,4-二氢嘧啶-2(1H)-(硫)酮类化合物的合成

将芳香醛(2 mmol)、1,3-二羰基化合物(2 mmol)、脲或硫脲(3 mmol)、离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐(10 mol%)，在70˚C下磁力搅拌反应0.5 h。冷却后加入碎冰，过滤，冰水洗涤固体得到粗产物，经乙醇重结晶即得到纯品，反应式如式1所示。化合物结构经1H NMR，13C NMR、IR和MS表征。

未被报道的化合物结构表征如下：

化合物4o：砖红色粉末，1H NMR (DMSO-d6, 400 MHz, TMS): δ (ppm) = 0.96 (t, 3H, CH3, J = 7.1 Hz), 2.29 (s, 3H, CH3), 3.79~3.91 (m, 2H, CH2), 5.89 (d, 1H, CH, J = 2.7 Hz), 7.85 (d, 1H, ArH, J = 8.7 Hz), 7.99 (s, 1H, NH), 8.53 (dd, 1H, ArH, J = 8.7, 2.4 Hz), 8.67 (d, 1H, ArH, J = 2.4 Hz), 9.53 (s, 1H, NH); 13C NMR (DMSO, 100 MHz): δ (ppm) = 13.71, 17.79, 49.44, 59.32, 97.17, 119.44, 128.34, 131.04, 145.44, 146.44, 147.01, 150.28, 150.78, 164.40; IR (KBr), υmax/cm−1: 3304, 3111, 2982, 1653, 1599, 1531, 1347, 1056, 833; ESI-MS: m/z (%) = 321 (100) [M + Na]+。

化合物4s：淡黄色粉末，1H NMR (DMSO-d6, 400 MHz, TMS): δ (ppm) = 1.11 (t, 3H, CH3, J = 7.1 Hz), 2.31 (s, 3H, CH3), 3.93~4.11 (m, 2H, CH2), 5.19 (d, 1H, CH, J = 3.6 Hz), 7.25~7.49 (m, 3H, ArH), 9.68 (s, 1H, NH), 10.44 (s, 1H, NH); 13C NMR (DMSO, 100 MHz): δ (ppm) = 13.87, 17.11, 52.92, 59.60, 99.91, 107.66, 107.87, 116.85, 117.08, 127.60, 127.67, 131.33, 141.43, 141.46, 145.58, 156.30, 158.73, 164.78, 174.15; IR

Scheme 1. Synthesis of 3,4-dihydropyrimidine-2(1H)-(thio)ones(4a-4u)

式1. 3,4-二氢嘧啶-2(1H)-(硫)酮(4a-4u)的合成

(KBr), υmax/cm−1: 3308, 3173, 2982, 1669, 1579, 1470, 1333, 1030, 942, 823, 764; ESI-MS: m/z (%) = 375 (100) [M + Na]+。

化合物4t：粉色粉末，1H NMR (DMSO-d6, 400 MHz, TMS): δ (ppm) = 1.01 (d, 3H, CH3, J = 6.2 Hz), 1.17 (d, 3H, CH3, J = 6.2 Hz), 2.23 (s, 3H, CH3), 3.72 (s, 3H, CH3), 4.78~4.87 (m, 1H, CH), 5.10 (d, 1H, CH, J = 3.3 Hz), 6.80~7.24 (m, 4H, ArH), 7.70 (s, 1H, NH), 9.14 (s, 1H, NH); 13C NMR (DMSO, 100 MHz): δ (ppm) = 17.60, 21.40, 21.69, 54.87, 66.24, 99.32, 112.00, 112.31, 118.18, 129.38, 146.34, 148.06, 152.05, 159.05, 164.73; IR (KBr), υmax/cm−1: 3231, 3107, 2833, 1721, 1699, 1598, 1493, 1091, 923, 866, 788; ESI-MS: m/z (%) = 327 (100) [M + Na]+。

化合物4u：墨绿色粉末，1H NMR (DMSO-d6, 400 MHz, TMS): δ (ppm) = 1.03 (d, 3H, CH3, J = 6.2 Hz), 1.16 (d, 3H, CH3, J = 6.2 Hz), 2.22 (s, 3H, CH3), 2.84 (s, 6H, 2 × CH3), 4.81 (m, 1H, CH), 5.02 (d, 1H, CH, J = 3.2 Hz), 6.65~7.03 (m, 4H, ArH), 7.55 (s, 1H, NH), 9.04 (s, 1H, NH); 13C NMR (DMSO, 100 MHz): δ (ppm) = 17.56, 21.47, 21.72, 53.25, 66.08, 100.11, 112.03, 126.80, 132.66, 147.14, 149.62, 152.17, 164.87; IR (KBr), υmax/cm−1: 3238, 3115, 2936, 1719, 1648, 1526, 1526, 1459, 1168, 1090, 920, 812; ESI-MS: m/z (%) = 340 (100) [M + Na]+。

3. 结果与讨论

3.1. 优化反应条件

以苯甲醛(2 mmol)、乙酰乙酸乙酯(2 mmol)、脲(3 mmol)的反应为模型，对反应条件进行了优化，实验结果见表1。首先考察了无催化剂条件下以及在离子液体催化剂4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮

Table 1. Optimization of reaction conditionsa

表1. 反应条件优化a

a反应条件：苯甲醛(2 mmol)，乙酰乙酸乙酯(2 mmol)，脲(3 mmol)，4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐(IL)，无溶剂或溶剂(2 mL)；b分离产率。

硫酸氢盐存在下反应的效果(表1, entries 1-2)，结果表明离子液体催化效果较好。其次考察了有无溶剂的条件对反应的影响(表1, entries 2-6)，结果表明无溶剂条件下产物产率较高。随后考察了温度和时间对该反应的影响(表1, entries 2, 7-15)，结果显示，在70˚C时反应0.5 h产物产率较高。最后，我们考察了催化剂的用量对该反应的影响(表1, entries 16-18)，当催化剂用量为10 mol%时，催化效率最高，产物产率可达93% (表1, entry 17)。因此，反应的最佳条件为：离子液体催化剂4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐用量10 mol%，无溶剂条件下70˚C反应0.5 h。

3.2. 反应底物普适性研究

在最佳反应条件下，对反应底物的普适性进行了研究，结果见表2。研究发现，当芳香醛上连接-CH3，-OCH3，-N(CH3)2等供电子基团(表2, entries 4b-4e)和吸电子的卤素、硝基等基团(表2, entries 4f-4o)时，反应都能顺利地进行。当芳香醛上连接一个或者两个羟基(表2, entries 4p-4q)时，反应也可以正常进行。当硫脲代替脲参与反应时(表2, entries 4r-4s)，也能顺利的得到目标产物。此外，乙酰乙酸异丙酯作为一种二羰基化合物也可以很好地参与反应，分别以81%和90%得到目标化合物(表2, entries 4t-4u)。以上结果表明，该反应具有一定的底物普适性。

4. 催化剂的循环使用性研究

催化剂的循环使用研究结果见图1。具体操作为：将反应结束后抽滤除去粗产物的滤液旋除水，真

Table 2. Research of substrate scopea

表2. 底物的普适性研究a

a反应条件：芳香醛(2 mmol)，1,3-二羰基化合物(2 mmol)，脲或硫脲(3 mmol)，离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐(10 mol%)，70˚C，0.5 h；b分离产率。

Figure 1. Recycling research of IL

图1. IL的循环性研究

空干燥至恒重后回收的离子液体直接用于下一次循环实验。离子液体重复使用6次的产率分别为92%，91%，92%，91%，90%，89%。表明离子液体具有良好的循环使用效果。

5. 总结

本文以离子液体4-苯基-3-丙基磺酸基四氢噻唑-2-硫酮硫酸氢盐为催化剂催化芳香醛、1,3-二羰基化合物、脲或硫脲发生Biginelli反应高产率地合成了一系列的3,4-二氢嘧啶-2(1H)-(硫)酮类化合物，该反应方法具有操作简单、时间短、催化剂可以高效循环使用等特点。

基金项目

“万人计划”后备人选培养项目(No. wr2016cx0145)；国家自然科学基金(No. 21572195)。

NOTES

*通讯作者。

参考文献

[1] Oliver, K.C. (1993) 100 Years of The Biginelli Dihydropyrimidine Synthesis. Tetrahedron, 49, 6937-6963.
https://doi.org/10.1016/S0040-4020(01)87971-0
[2] Kappe, C.O. (2000) Biologically Active Dihydropyrimidones of the Biginelli-Type: A Literature Survey. European Journal of Medicinal Chemistry, 35, 1043-1052.
https://doi.org/10.1016/S0223-5234(00)01189-2
[3] Nazeruddin, N.G.M. and Mahesh, S.P. (2010) Microwave Assisted One Pot Synthesis of Substituted Dihydropyrimidine-2(1H) Ones Using 5-Sulphosalicyclic Acid as a Catalyst. Der Chemica Sinica, 1, 15-20.
[4] Mandhane, P.G., Joshi, R.S. and Nagargoje, D.R. (2010) Gill C.H. An Efficient Synthesis of 3,4-Dihydropyrimidin- 2(1H)-Ones Catalyzed by Thiamine Hydrochloride in Water under Ultrasound Irradiation. Tetrahedron Letters, 51, 3138-3140.
https://doi.org/10.1016/j.tetlet.2010.04.037
[5] Zohdi, H.F., Rateb, N.M. and Elnagdy, S.M. (2011) Green Synthesis and Antimicrobial Evaluation of Some New Trifluoromethyl-Substituted Hexahydropyrimidines by Grinding. European Journal of Medicinal Chemistry, 46, 5636-5640.
https://doi.org/10.1016/j.ejmech.2011.09.036
[6] Quan, Z.J.D., Zhang, Y.X. and Wang, X.C. (2009) PS-PEG-SO3H as an Efficient Catalyst for 3,4-Dihydropyrimidones via Biginelli Reaction. Catalysis Communications, 10, 1146-1148.
https://doi.org/10.1016/j.catcom.2008.12.017
[7] Ranu, B.C., Hajra, A. and Jana, U. (2000) Indium(III) Chloride-Catalyzed One-Pot Synthesis of Dihydropyrimidinones by a Three-Component Coupling of 1,3-Dicarbonyl Compounds, Caldehydesand Urea: An Improved Procedure for the Biginelli Reaction. Journal of Organic Chemistry, 65, 6270-6272.
https://doi.org/10.1021/jo000711f
[8] Debache, A., Amimour, M., Belfaitah, A., Rhouati, S. and Carboni, B. (2008) A One-Pot Biginelli Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones/Thiones Catalyzed by Triphenylphosphine as Lewis Base. Tetrahedron Letters, 49, 6119-6121.
https://doi.org/10.1016/j.tetlet.2008.08.016
[9] Karthikeyan, P., Kumar, S.S., Arunrao, A.S., Narayan, M.P. and Bhagat, P.R. (2012) A Novel Amino Acid Functionalized Ionic Liquid Promoted One-Pot Solvent-Free Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Thiones. Research on Chemical Intermediates, 39, 1335-1342.
https://doi.org/10.1007/s11164-012-0689-4
[10] Xu, D.Z., Li, H. and Wang, Y. (2012) Highly Enantioselective Biginelli Reaction Catalyzed by a Simple Chiral Primary Amine Catalyst: Asymmetric Synthesis of Dihydropyrimidines. Tetrahedron, 68, 7867-7872.
https://doi.org/10.1016/j.tet.2012.07.027
[11] Liu, C.J., Wang, J.D. and Li, Y.P. (2006) One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H)-(Thio)Ones Using Strontium(II) Nitrate as a Catalyst. Journal of Molecular Catalysis A: Chemical, 258, 367-370.
https://doi.org/10.1016/j.molcata.2006.07.037
[12] Chen, N., Jia, W. and Xu, J. (2009) A Versatile Synthesis of Various Substituted Taurines from Vicinal Amino Alcohols and Aziridines. European Journal of Organic Chemistry, 33, 5841-5846.
https://doi.org/10.1002/ejoc.200900759
[13] Shaabani, A. and Maleki, A. (2007) Three-Component One-Pot Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones Catalyzed by Bromodimethylsulfonium Bromide. Chemical Papers, 61, 333-336.
https://doi.org/10.2478/s11696-007-0043-2
[14] Debache, A., Amimour, M. and Belfaitah, A. (2009) A One-Pot Biginelli Synthesis of 3,4-Dihydropyrimidin-2- (1H)-Ones/Thiones Catalyzed by Triphenylphosphine as Lewis Base. Tetrahedron Letters, 40, 6119-6121.
https://doi.org/10.1002/chin.200904151
[15] Ramalingan, C. and Kwak, Y.W. (2008) Tetrachlorosilane Catalyzed Multicomponent One-Step Fusion of Biopertinent Pyrimidine Heterocycles. Tetrahedron, 64, 5023-5031.
https://doi.org/10.1016/j.tet.2008.03.078
[16] Kefayati, H. and Khanjanian, R. (2012) 1-Methylimidazolium Hydrogen Sulfate/Chlorotrimethylsilane: An Effective Catalytic System for the Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones and Hydroquinazoline-2,5-Diones. Journal of Molecular Liquids, 172, 147-151.
https://doi.org/10.1016/j.molliq.2012.01.019
[17] Tu, S., Fang, F. and Miao, C. (2003) One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H )-ones Using Boric Acid as Catalyst. Tetrahedron Letters, 34, 6153-6155.
https://doi.org/10.1016/S0040-4039(03)01466-7
[18] Gholap, A.R., Venkatesan, K., Daniel, T., Lahoti, R.J. and Srinivasan, K.V. (2004) Ionic Liquid Promoted Novel and Efficient One Pot Synthesis of 3,4-Dihydropyrimidin-2-(1H)-ones at Ambient Temperature under Ultrasound Irradiation. Green Chemistry, 6, 147.
https://doi.org/10.1039/b314015f
[19] Boumoud, T., Boumoud, B., Mosset, P. and Debache, A. (2011) Gypsum-Catalyzed One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H) under Solvent-Free Conditions. Chemistry—A European Journal, 8, 312-318.
https://doi.org/10.1155/2011/780271
[20] Yadav, J.S., Reddy, B.V.S., Sridhar, P., Reddy, J.S.S., Nagaiah, K. and Lingaiah, N. (2004) Green Protocol for the Biginelli Three-Component Reaction: Ag3PW12O40 as a Novel Water-Tolerant Heteropolyacid for the Synthesis of 3,4-Dihydropyrimidinones. European Journal of Organic Chemistry, 3, 552-557.
https://doi.org/10.1002/ejoc.200300559
[21] Sujatha, K., Shanmugam, P., Perumal, P.T., Muralidharan, D. and Rajendran, M. (2006) Synthesis and Cardiac Effects of 3,4-Dihydropyrimidin-2(1H)-one-5 Carboxylates. Bioorganic & Medicinal Chemistry Letters, 16, 4893-4897.
https://doi.org/10.1016/j.bmcl.2006.06.059
[22] Jiang, C. and You, Q.D. (2007) An Efficient and Solvent-Free One-Pot Synthesis of Dihydropyrimidinones under Microwave Irradiation. Chinese Chemical Letters, 18, 647-650.
https://doi.org/10.1016/j.cclet.2007.04.002
[23] Hajipour, A.R. and Seddighi, M. (2012) Pyridinium-Based Brønsted Acidic Ionic Liquid as a Highly Efficient Catalyst for One-Pot Synthesis of Dihydropyrimidinones. Synthetic Communications, 42, 227-235.
https://doi.org/10.1080/00397911.2010.523488
[24] Jing, X., Li, Z., Pan, X., Shi, Y. and Yan, C. (2009) NaIO4-Catalyzed One-Pot Synthesis of Dihydropyrimidinones at Room Temperature under Solvent-Free Conditions. Journal of the Iranian Chemical Society, 6, 514-518.
https://doi.org/10.1007/BF03246529
[25] Nasr-Esfahani, M., Hoseini, S.J. and Mohammadi, F. (2011) Fe3O4 Nanoparticles as an Efficient and Magnetically Recoverable Catalyst for the Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones under Solvent-Free Conditions. Chinese Journal of Catalysis, 32, 1484-1489.
https://doi.org/10.1016/S1872-2067(10)60263-X
[26] Silva, D.L., Fernandes, S.A. and Sabino, A.A. (2011) p-Sulfonic Acid Calixarenes as Efficient and Reusable Organocatalysts for the Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones-thiones. Tetrahedron Letters, 52, 6328-6330.
https://doi.org/10.1016/j.tetlet.2011.08.175
[27] Attaby, F.A., Ramla, M.M. and Harukuni, T. (2008) Synthesis and Inhibitory Activity against Epstein-Barr Virus of Some New 1,2,3,4-Tetrahydropyrimidine-2-Thiones. Phosphorus & Sulfur & the Related Elements, 183, 2956-2967.
https://doi.org/10.1080/10426500802043152

为你推荐