电解质/阴极界面结构对固体氧化物燃料电池阴极性能的影响
Effect of Electrolyte/Cathode Interface Structure on Cathode Performance of Solid Oxide Fuel Cells
DOI: 10.12677/AEPE.2013.12009, PDF, HTML, XML, 下载: 3,030  浏览: 8,385  国家自然科学基金支持
作者: 王晓明*, 李享, 金雪, 吴众垚, 王琳琳, 虞付进:浙江师范大学工学院,金华
关键词: 固体氧化燃料电池火焰喷涂结构化电解质阴极Solid Oxide Fuel Cells; Flame Spraying; Structured Electrolyte; Cathode
摘要: 本文采用火焰喷涂和涂覆相结合的方法制备了结构化Pt阴极。采用SEM观察阴极的组织结构,采用电化学交流阻抗谱法研究了结构化阴极极化行为,探讨了电解质/阴极界面结构对阴极极化的影响规律。结果表明,电解质表面结构对阴极极化性能有重要影响,在温度小于850时,结构化Pt阴极极化约为平直界面阴极极化的0.3~0.75倍。
Abstract: In this paper, a structured Pt cathode is prepared by flame spraying and slurry coating. The microstructure of the cathode is characterized by SEM. The electrochemical behavior of single cell with the structured cathode is charac- terized by the electrochemical impedance spectroscopy. Effect of electrolyte/cathode interface structure on electro- chemical behavior is discussed. The results show that the electrolyte surface structure has an important influence on cathode polarization. When the temperature is less than 850˚C, the cathode polarization of the cell with a structured electrolyte is approximately 0.3 to 0.75 times of that with a flat electrolyte.
文章引用:王晓明, 李享, 金雪, 吴众垚, 王琳琳, 虞付进. 电解质/阴极界面结构对固体氧化物燃料电池阴极性能的影响[J]. 电力与能源进展, 2013, 1(2): 49-53. http://dx.doi.org/10.12677/AEPE.2013.12009

参考文献

[1] 黄秋安, 朱斌. 燃料电池的挑战和新的机遇[J]. 可持续能源, 2012, 1: 89-96.
[2] S. C. Singhal. Advances in solid oxide fuel cell technology. Solid State Ionics, 2000, 135: 305-313.
[3] 衣宝廉. 燃料电池现状与未来[J]. 电源技术, 1998, 22(5): 216-221.
[4] S. Souza, S. J. Visco and L. C. DeJonghe. Thin-film solid oxide fuel cell with high performance at low temperature. Solid state Ionics, 1997, 98(1-2): 57-61.
[5] T. Ishihara, S. Fukui, H. Nishiguchi, et al. Mixed electronic- oxide ionic conductor of BaCoO3 doped with La for cathode of intermediate-temperature-operating solid oxide fuel cell. Solid State Ionics, 2002, 152: 609-613.
[6] S. J. Kinner. Recent advances in perovskite-type materials for solid oxide fuel cell cathodes. International Journal of Inorganic Materials, 2001, 3: 113-205.
[7] A. Weber, E. Ivers-Tiffée. Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications. Journal of Power Sources, 2004, 127: 273-283.
[8] X. M. Wang, C. X. Li, C. J. Li, et al. Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by sus- pension plasma spraying. International Journal of Hydrogen En- ergy, 2010, 35(7): 3152-3158.
[9] C. C. Anne, V. I. Birss. Mechanistic analysis of the oxygen re- duction reaction at (La, Sr)MnO3 cathodes in solid oxide fuel cells. The Journal of Physical Chemistry B, 2006, 110: 11299- 11309.
[10] E. P. Murray, T. Tsai and S. A. Barnett. Oxygen transfer proc- esses in (La, Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: An impe- dance spectroscopy study. Solid State Ionics, 1998, 110: 235- 243.
[11] T. Horita, K. Yamaji, N. Sakai, et al. Oxygen reduction mecha- nism at porous La1-xSrxCoO3-d cathodes/La0.8Sr0.2Ga0.8Mg0.2O2.8 electrolyte interface for solid oxide fuel cells. Electrochimica Acta, 2001, 46: 1837-1845.