兆瓦级垂直轴风力发电机塔架的设计与分析
Design and Analysis of MW H-Type Vertical Axis Wind Turbine Tower
摘要:
针对现有大型垂直轴风力发电机组塔架存在的不足,提出了一种新型兆瓦级H型垂直轴风力发电双三角形式的塔架,计算了塔架所承受的永久载荷和风载。利用Ansys workbench有限元分析软件,对塔架进行了静强度和刚度分析。结果表明,在现有设计参数下,塔架的最大等效应力为7.1 Mpa,塔架的最大变形位于最高处,为0.04 m,强度和刚度均满足要求。
Abstract:
Aiming at the deficiency of existing large vertical axis wind turbine tower, a MW H-type vertical shaft wind power tower with double triangle is designed. The permanent load and wind load of tower structure are calculated. By means of Ansys workbench software, the static strength and rigidity of the tower are also analyzed. Numerical simulation results show that the maximum deformation and the maximum stress of the tower are within the allowable range in the condition of given design parameters.
参考文献
[1]
|
卢为平 (2011) 风力发电基础.化学工业出版社, 北京.
|
[2]
|
姚兴佳, 宋俊 (2009) 风力发电机组原理与应用. 机械工业出版社, 北京.
|
[3]
|
朱仁胜, 刘永梅, 蒋东翔等 (2011) 基于MW级风力发电机塔架的有限元分析. 机械设计与制造, 5, 104-106.
|
[4]
|
李宗福, 张有闻, 白云飞 (2007) 风力发电机塔架设计综述. 低温建筑技术, 4, 79-80.
|
[5]
|
杜志杰, 马丽娜 (2009) 风力发电.化学工业出版社, 北京.
|
[6]
|
赵文涛, 曹平周 (2010) 陈建锋. 风力发电钢塔筒的荷载计算方法和荷载组合研究. 特种结构, 4, 73-76.
|
[7]
|
戴建鑫 (2011) 风力机塔架的有限元建模与静动态特性的分析. 兰州理工大学, 兰州, 12-14.
|
[8]
|
张晓峰, 张静, 姚金山 (2012) 基于ANSYS Workbench的大型风力发电机组塔架静态分析. 太阳能, 15, 36-39.
|