智能化检测小螺距螺纹参数的方法设计与研究
The Design and Research of Intelligent Detection Method of Thread Parameters with Small Pitch
摘要:
螺纹检测是现代化工业检测范围内的一个重要组成部分,是保证产品质量的关键。本文设计了一套用智能化检测系统去检测小螺距螺纹参数的方法。与常规的检测方式相比,该系统具有快速、准确、非接触式的优点。文章还介绍了检测螺纹参数的数据采集与处理的具体方法,并通过试验证明该方法的可行性。
Abstract: Thread detection is an important part of the modern industrial within the scope of detection, and the key to ensure the product quality. This paper provides a kind of intelligent detection method that can realize non-contact measuring small pitch of thread parameters. Compared with the tra-dition method, it is faster, more accurate and non-contact. In addition, it proves that the designed method is simple feasible through the experiment.
参考文献
[1]
|
佟岩, 李琳, 唐江涛, 刘科 (2008) 螺纹多参数检测的发展方向. 红外与激光工程, 37, 227-229.
|
[2]
|
胡松, 王肇志, 唐小萍(2002)高精度螺距自动扫描测量仪设计. 计量技术, 2, 7-10.
|
[3]
|
张广玉, 简继红, 陈志刚 (2006) 测量锥螺纹中径的图像“三针法”. 工具技术, 12, 73-76.
|
[4]
|
张永宏, 胡德金 (2004) 基于灰度矩的CCD图像亚像素边缘检测算法研究. 光学技术, 6, 693-695.
|
[5]
|
沈少伟, 严树花, 周春雷 (2007) 基于CCD视觉的螺纹参数自动检测技术研究. 半导体光电, 06, 73-76.
|
[6]
|
黄爱民, 安向京, 骆力 (2005) 数字图像处理与分析基础. 中国水利出版社, 北京.
|
[7]
|
张德丰 (2012) MATLAB数字图像处理. 机械工业出版社, 北京, 865-869.
|
[8]
|
刘刚, 王立香, 董延 (2010) MATLAB数字图像处理. 机械工业出版社, 北京.
|
[9]
|
陈琦峰, 张玮, 张青春 (2012) 基于图像分析技术的螺纹自动化测量系统研究. 中国测试, 01, 26-28.
|
[10]
|
催彦平, 葛杏卫, 张洪亮 (2010) 机械零件直线边缘亚像素定位方法研究. 半导体光电, 05, 797-800.
|