反应堆压力容器水位测量不确定度评定研究
Research on the Uncertainty Evaluation of Reactor Pressure Vessel Water Level Measurement
DOI: 10.12677/NST.2017.51004, PDF, HTML, XML,  被引量 下载: 1,500  浏览: 2,979  国家科技经费支持
作者: 朱建敏*, 周胜, 胡友森:中广核研究院有限公司,广东 深圳
关键词: 水位测量不确定度Water Level Measurement Uncertainty
摘要: 压力容器水位是核电厂设计和运行关注的重点参数之一,本文利用标准不确定度评定方法,结合CPR1000核电厂RPVL测量方法及相关数据,建立了压力容器水位测量不确定度评定模型,为压力容器水位测量不确定度评定提出了具体的方法。为今后核电厂压力容器水位设计和运行,以及进行性能改进提供了理论依据和指导方向。
Abstract: Pressure vessel water level is one of the key parameters in nuclear power plant design and opera-tion. This paper researched on general uncertainty analysis model of pressure vessel water level measurement, based on the standard uncertainty analysis method. And the CPR1000 nuclear power plant RPVL measurement system and data were used to elaborate the specific uncertainty analysis method of water level measurement. This uncertainty analysis method could be retained as reference and guidance to pressure vessel water level measurement design, maintenance and performance improvement.
文章引用:朱建敏, 周胜, 胡友森. 反应堆压力容器水位测量不确定度评定研究[J]. 核科学与技术, 2017, 5(1): 29-35. http://dx.doi.org/10.12677/NST.2017.51004

参考文献

[1] 中广核工程有限公司. 压水堆核电厂核岛系统设计•核岛仪控系统设计[M]. 北京: 原子能出版社, 2010.
[2] 陈良, 王群峰, 王刚, 董伟鹤, 王天军. CPR1000堆芯冷却监视系统整体架构剖析[J]. 自动化博览, 2013(3): 96-98.
[3] 李刚, 谢逸钦, 刘春明, 左新. 压水堆核电厂堆芯冷却监视系统的数字化改造方案研究[J]. 核科学与工程, 2012, 32(2): 206-211.
[4] 何正熙, 李白, 吴峻, 张帆. 秦山核电二期扩建工程堆芯冷却监测系统设计[J]. 核动力工程, 2008, 29(1): 5-9.
[5] 叶培德. 测量不确定度理解评定与应用[M]. 北京: 中国质检出版社, 2013.