钢管混凝土圆柱保护层的设计及施工技术的研究
Research on the Construction Technology and Design of the Protection Layer of Concrete Filled Steel Tube Column
摘要:
通过对钢管混凝土圆柱保护层的计算分析及特点介绍,得出符合设计要求的防火保护层厚度。根据现场实际情况,优化施工工序,总结出符合实际的施工工艺。不但保证设计的防火要求,同时在施工过程中对关键工序进行控制。使得该施工技术可以在类似工程中推广应用。
Abstract:
Through the calculation analysis and characteristic introduction of the protective layer of con-crete filled steel tube columns, it is concluded the protection layer thickness which complies with the design requirements. According to the actual site condition and optimization of the construction process, it sums up the actual construction process which ensures the design of fireproof requirement and at the same time controls the key process in the construction process. The new technology makes wide prospect and extensive popularized significance.
参考文献
[1]
|
CECS200-2006,《建筑钢结构防火技术规范》[S].
|
[2]
|
GB50010-2010,《混凝土结构设计规范》[S].
|
[3]
|
GB50210-2002,《建筑装饰装修工程质量验收规范》[S].
|
[4]
|
李强, 李同优, 路佳杰. 保证钢丝网架夹芯板抹灰质量的技术措施[J]. 建筑技术, 2006, 37(11): 850-852.
|
[5]
|
王赫, 徐国斌. 加气混凝土砌块墙面抹灰空鼓与裂缝的分析及预防[J]. 建筑技术, 2006, 37(4): 248-249.
|