双T板企口力学性能非线性有限元分析
Nonlinear Finite Element Analysis on the Mechanical Behaviors of Double-Tee Dapped End
摘要:
当预制预应力混凝土双T板端部为企口形式时,不仅可以降低支承梁高、增加板的稳定性,还可以灵活地与牛腿、倒T型和L型支承梁搭配使用,有很好的应用前景。为了更进一步了解双T板企口的力学性能,本文通过有限元软件ABAQUS对带企口双T板中企口区域进行三维非线性分析,来研究各种参数对企口力学性能的影响,最后对有限元分析的结果进行总结,得出对双T板企口力学性能有重要影响的因素,并提出了双T板企口的相关设计建议。
Abstract:
When the end of double-tee is dapped, it can reduce the height of supporting beams with a greater lateral stability; besides, it can be used with brackets, inverted T beams and L-shaped beams flexibly with great application prospect. Base on ABAQUS, non-linear finite element analysis was used to model the behavior of the dapped end of double-tee to study the effects of various parameters believed to affect the mechanical behavior of dapped-end. Finally, the results of the finite element analysis are summarized, and the parameters which have important influence on the mechanical properties of the double-tee dapped end are determined, and the design recommendations of the double-tee dapped end are proposed.
参考文献
[1]
|
汤武华, 裘涛. 预应力混凝土双T板设计剖析[J]. 建筑结构, 2009(S2): 58-59.
|
[2]
|
中国建筑科学研究院. 09SG432-2: 预应力混凝土双T板(平板, 宽度2.4 m、2.4 m、3.0 m) [M]. 中国计划出版社, 2009.
|
[3]
|
Precast/Prestressed Concrete Institute. PCI Design Handbook. 7th Edition. Chicago, 2010.
|
[4]
|
王玉镯, 傅传国. ABAQUS结构工程分析及实例详解[M]. 北京: 中国建筑工业出版社, 2010.
|
[5]
|
GB50010-2010. 混凝土结构设计规范[S]. 北京: 中国建筑工业出版社, 2011.
|
[6]
|
杨旭, 邓思华, 李晨光, 等. 基于ABAQUS的双T板极限承载力的非线性有限元分析[J]. 建筑技术开发, 2013, 40(11): 1-3.
|