[1]
|
Li, W., Chen, S., Peng, X., et al. (2019) A Comprehensive Approach for the Clustering of Similar-Performance Cells for the Design of a Lithium-Ion Battery Module for Electric Vehicles. Engineering, 5, 795-802.
https://doi.org/10.1016/j.eng.2019.07.005
|
[2]
|
Huang, Y., Mei, P., Lu, Y., et al. (2019) A Novel Approach for Lithium-Ion Battery Thermal Management with Streamline Shape Mini Channel Cooling Plates. Applied Thermal Engi-neering, 157, 113623.
https://doi.org/10.1016/j.applthermaleng.2019.04.033
|
[3]
|
Malik, M., Dincer, I., Rosen, M.A., et al. (2018) Ther-mal and Electrical Performance Evaluations of Series Connected Li-Ion Batteries in a Pack with Liquid Cooling. Applied Thermal Engineering, 129, 472-481.
https://doi.org/10.1016/j.applthermaleng.2017.10.029
|
[4]
|
Kim, J., Oh, J. and Lee, H. (2019) Review on Battery Thermal Management System for Electric Vehicles. Applied Thermal Engineering, 149, 192-212. https://doi.org/10.1016/j.applthermaleng.2018.12.020
|
[5]
|
Yan, J., Wang, Q., Li, K. and Sun, J. (2016) Numerical Study on the Thermal Performance of a Composite Board in Battery Thermal Management System. Applied Thermal En-gineering, 106, 131-140.
https://doi.org/10.1016/j.applthermaleng.2016.05.187
|
[6]
|
叶贞. 锂离子电池模型的建立及电池管理系统的研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2013.
|
[7]
|
齐晓霞, 王文, 邵力清. 混合动力电动车用电源热管理的技术现状[J]. 电源技术, 2005, 29(3): 178-181.
|
[8]
|
杨志刚, 黄慎, 赵兰萍. 电动汽车锂离子电池组散热优化设计[J]. 计算机辅助工程, 2011, 20(3): 1-5.
|
[9]
|
洪思慧, 张新强, 双凤, 等. 基于热管技术的锂离子动力电池热管理系统研究进展[J]. 化工进展, 2014, 11(11): 2923-2927.
|
[10]
|
Chen, K., Wang, S., Song, M. and Chen, L. (2017) Configuration Optimization of Battery Pack in Parallel Air-Cooled Battery Thermal Management System Using an Opti-mization Strategy. Applied Thermal Engineering, 123, 177-186.
https://doi.org/10.1016/j.applthermaleng.2017.05.060
|
[11]
|
Lu, Z., Meng, X.Z., Wei, L.C., et al. (2016) Thermal Management of Densely-Packed EV Battery with Forced Air Cooling Strategies. Energy Procedia, 88, 682-688. https://doi.org/10.1016/j.egypro.2016.06.098
|
[12]
|
Chen, K., Song, M., Wei, W. and Wang, S. (2018) Structure Optimization of Parallel Air-Cooled Battery Thermal Management System with U-Type Flow for Cooling Efficiency Im-provement. Energy, 145, 603-613.
https://doi.org/10.1016/j.energy.2017.12.110
|
[13]
|
An, Z., Shah, K., Jia, L. and Ma, Y. (2019) A Parametric Study for Optimization of Minichannel Based Battery Thermal Management System. Applied Thermal Engineering, 154, 593-601.
https://doi.org/10.1016/j.applthermaleng.2019.02.088
|
[14]
|
邓磊. 基于改进PNGV模型的动力锂电池 SOC估计和充电优化[D]: [硕士学位论文]. 哈尔滨: 哈尔滨工业大学, 2014.
|
[15]
|
Rao, Z., Wang, Q. and Huang C. (2016) Investigation of the Thermal Performance of Phase Change Material/Mini-Channel Coupled Battery Thermal Manage-ment System. Applied Energy, 164, 659-669.
https://doi.org/10.1016/j.apenergy.2015.12.021
|
[16]
|
Li, W., Peng, X., Xiao, M., Garg, A. and Gao, L. (2019) Mul-ti-Objective Design Optimization for Mini-Channel Cooling Battery Thermal Management System in an Electric Vehicle. International Journal of Energy Research, 43, 3668-3680. https://doi.org/10.1002/er.4518
|
[17]
|
Sabbah, R., Kizilel, R., Selman, J.R. and Al-Hallaj, S. (2008) Active (Air-Cooled) vs Passive (Phase Change Material) Thermal Management of High Power Lithium-Ion Packs: Limitation of Temperature Rise and Uniformity of Temperature Distribution. Journal of Power Sources, 182, 630-638. https://doi.org/10.1016/j.jpowsour.2008.03.082
|
[18]
|
Rao, Z., Wang, S. and Zhang, G. (2011) Simulation and Experiment of Thermal Energy Management with Phase Change Material for Ageing LiFePO4 Power Battery. Energy Conversion and Management, 52, 3408-3414.
https://doi.org/10.1016/j.enconman.2011.07.009
|
[19]
|
Javani, N., Dincer, I. and Naterer, G.F. (2015) Numerical Modeling of Submodule Heat Transfer with Phase Change Material for Thermal Management of Electric Vehicle Battery Packs. Journal of Thermal Science and Engineering Applications, 7, 031005. https://doi.org/10.1115/1.4029053
|
[20]
|
Peterson, G.P. (1994) An Introduction to Modelling, Testing and Applica-tion. John Wiley and Sons, New York.
|
[21]
|
Zhao, R., Gu, J. and Liu, J. (2015) An Experimental Study of Heat Pipe Thermal Management System with Wet Cooling Method for Lithium Ion Batteries. Journal of Power Sources, 273, 1089-1097.
https://doi.org/10.1016/j.jpowsour.2014.10.007
|
[22]
|
Smith, J., Singh, R., Hinterberger, M. and Mochizuki, M. (2018) Battery Thermal Management System for Electric Vehicle Using Heat Pipes. International Journal of Thermal Sciences, 134, 517-529.
https://doi.org/10.1016/j.ijthermalsci.2018.08.022
|
[23]
|
Gan, Y., Wang, J., Liang, J., et al. (2020) Development of Thermal Equivalent Circuit Model of Heat Pipe-Based Thermal Management System for a Battery Module with Cylin-drical Cells. Applied Thermal Engineering, 164, 114523.
https://doi.org/10.1016/j.applthermaleng.2019.114523
|
[24]
|
Zhu, J., Sun, Z., Wei, X., Dai, H. and Gu, W. (2017) Experimental Investigations of an AC Pulse Heating Method for Vehicular High Power Lithium-Ion Batteries at Subzero Temperatures. Journal of Power Sources, 367, 145-157.
https://doi.org/10.1016/j.jpowsour.2017.09.063
|
[25]
|
Yang, X.G., Liu, T. and Wang, C.Y. (2021) Thermally Mod-ulated Lithium Iron Phosphate Batteries for Mass-Market Electric Vehicles. Nature Energy, 6, 176-185. https://doi.org/10.1038/s41560-020-00757-7
|