[1]
|
Shi, W.D., Wang, C., Lu, W.G., et al. (2010) Optimization Design of Stainless Steel Stamping Multistage Pump Based on Orthogonal Test. International Journal of Fluid Machinery and Systems, 3, 309-314.
https://doi.org/10.5293/IJFMS.2010.3.4.309
|
[2]
|
Huang, R.F., Luo, X.W., Ji, B., et al. (2015) Multi-Objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm. Science China Technological Sci-ences, 58, 2122-2130.
https://doi.org/10.1007/s11431-015-5865-5
|
[3]
|
Tong, S.G., Zhao, H., Liu, H.Q., et al. (2019) Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model. Journal of Fluids Engineering, 142, Article ID: 011101. https://doi.org/10.1115/1.4043775
|
[4]
|
Zhao, J.T., Pei, J., Yuan, J.P., et al. (2022) Energy-Saving Ori-ented Optimization Design of the Impeller and Volute of a Multi-Stage Double-Suction Centrifugal Pump Using Artificial Neural Network. Engineering Applications of Computational Fluid Mechanics, 16, 1974-2001. https://doi.org/10.1080/19942060.2022.2127913
|
[5]
|
Gan, X.C., Pei, J., Wang, W.J., et al. (2023) Application of a Modified MOPSO Algorithm and Multi-Layer Artificial Neural Network in Centrifugal Pump Optimization. Engineering Optimization, 55, 580-598.
https://doi.org/10.1080/0305215X.2021.2015585
|
[6]
|
Wu, T.X., Wu, D. H., Ren, Y., et al. (2022) Multi-Objective Optimization on Diffuser of Multistage Centrifugal Pump Base on ANN-GA. Structural and Multidisciplinary Optimization, 65, Article No. 182.
https://doi.org/10.1007/s00158-022-03278-x
|
[7]
|
Wu, T.X., Wu, D.H., Gao, S.Y., et al. (2023) Multi-Objective Optimization and Loss Analysis of Multistage Centrifugal Pumps. Energy, 284, Article ID: 128638. https://doi.org/10.1016/j.energy.2023.128638
|
[8]
|
Zhang, Y.Q., Xu, Y.H., Zheng, Y., et al. (2019) Multiobjective Optimization Design and Experimental Investigation on the Axial Flow Pump with Orthogonal Test Approach. Complex-ity, 2019, Article ID: 1467565.
https://doi.org/10.1155/2019/1467565
|
[9]
|
Wang, Y.Q. and Huo, X.W. (2018) Multiobjective Optimization Design and Performance Prediction of Centrifugal Pump Based on Orthogonal Test. Advances in Materials Science and Engi-neering, 2018, Article ID: 6218178.
https://doi.org/10.1155/2018/6218178
|
[10]
|
Benturki, M., Dizene, R. and Ghenaiet, A. (2018) Multi-Objective Op-timization of Two-Stage Centrifugal Pump Using NSGA-II Algorithm. Journal of Applied Fluid Mechanics, 11, 929-943. https://doi.org/10.29252/jafm.11.04.28509
|
[11]
|
Zhang, Y., Hu, S.B., Wu, J.L., et al. (2014) Multi-Objective Opti-mization of Double Suction Centrifugal Pump Using Kriging Metamodels. Advances in Engineering Software, 74, 16-26. https://doi.org/10.1016/j.advengsoft.2014.04.001
|
[12]
|
Suh, J.W., Kim, J.W., Choi, Y.S., et al. (2017) Mul-ti-Objective Optimization of the Hydrodynamic Performance of the Second Stage of a Multi-Phase Pump. Energies, 10, Article No. 1334. https://doi.org/10.3390/en10091334
|
[13]
|
Hu, Q., Zhai, X.Y. and Li, Z.F. (2022) Multi-Objective Optimization of Deep-Sea Mining Pump Based on CFD, GABP Neural Network and NSGA-III Algorithm. Journal of Marine Science and Engineering, 10, Article No. 1063.
https://doi.org/10.3390/jmse10081063
|
[14]
|
Xu, K., Wang, G., Zhang, L.Y., et al. (2021) Multi-Objective Optimi-zation of Jet Pump Based on RBF Neural Network Model. Journal of Marine Science and Engineering, 9, Article No. 236. https://doi.org/10.3390/jmse9020236
|
[15]
|
Samad, A. and Kim, K.Y. (2008) Shape Optimization of an Axial Compressor Blade by Multi-Objective Genetic Algorithm. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222, 599-611.
https://doi.org/10.1243/09576509JPE596
|
[16]
|
Samad, A. and Kim, K.Y. (2008) Multi-Objective Optimization of an Axial Compressor Blade. Journal of Mechanical Science and Technology, 22, 999-1007. https://doi.org/10.1007/s12206-008-0122-5
|
[17]
|
Wang, W., Mo, R. and Zhang, Y. (2011) Multi-Objective Aero-dynamic Optimization Design Method of Compressor Rotor Based on Isight. Procedia Engineering, 15, 3699-3703. https://doi.org/10.1016/j.proeng.2011.08.693
|
[18]
|
Benini, E. (2004) Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor. Journal of Propulsion and Power, 20, 559-565. https://doi.org/10.2514/1.2703
|
[19]
|
Lian, Y.S. and Liou, M.S. (2005) Multi-Objective Optimization of Transonic Compressor Blade Using Evolutionary Algorithm. Journal of Propulsion and Power, 21, 979-987. https://doi.org/10.2514/1.14667
|
[20]
|
Keskin, A. and Bestle, D. (2006) Application of Multi-Objective Optimization to Axial Compressor Preliminary Design. Aerospace Science and Technology, 10, 581-589. https://doi.org/10.1016/j.ast.2006.03.007
|
[21]
|
Bonaiuti, D. and Zangeneh, M. (2009) On the Coupling of Inverse Design and Optimization Techniques for the Multiobjective, Multipoint Design of Turbomachinery Blades. Journal of Turbomachinery, 131, Article ID: 021014.
https://doi.org/10.1115/1.2950065
|
[22]
|
Kim, J.H., Choi, J.H, Husain, A., et al. (2010) Multi-Objective Optimiza-tion of a Centrifugal Compressor Impeller through Evolutionary Algorithms. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224, 711-721. https://doi.org/10.1243/09576509JPE884
|
[23]
|
Li, C., Wang, J., Guo, Z.D., et al. (2019) Aero-Mechanical Multidisciplinary Optimization of a High Speed Centrifugal Im-peller. Aerospace Science and Technology, 95, Article ID: 105452. https://doi.org/10.1016/j.ast.2019.105452
|
[24]
|
Tun, M.T. and Sakaguchi, D. (2016) Multi-Point Optimization of Recirculation Flow Type Casing Treatment in Centrifugal Compressors. Journal of Thermal Science, 25, 231-241. https://doi.org/10.1007/s11630-016-0855-x
|
[25]
|
Schiffmann, J. and Favrat, D. (2010) Design, Experimental Inves-tigation and Multi-Objective Optimization of a Small- Scale Radial Compressor for Heat Pump Applications. Energy, 35, 436-450.
https://doi.org/10.1016/j.energy.2009.10.010
|
[26]
|
Verstraete, T., Alsalihi, Z. and Van Den Braembussche, R.A. (2010) Multidisciplinary Optimization of a Radial Compressor for Microgas Turbine Applications. Journal of Tur-bomachinery, 132, Article ID: 031004.
https://doi.org/10.1115/1.3144162
|
[27]
|
Kim, J.H., Choi, J.H., Husain, A., et al. (2010) Performance Enhancement of Axial Fan Blade through Multi-Objective Optimization Techniques. Journal of Mechanical Science and Technology, 24, 2059-2066.
https://doi.org/10.1007/s12206-010-0619-6
|
[28]
|
Kim, J.H., Kim, J.W. and Kim, K.Y. (2011) Axial-Flow Ventila-tion Fan Design through Multi-Objective Optimization to Enhance Aerodynamic Performance. Journal of Fluids Engi-neering, 133, Article ID: 101101.
https://doi.org/10.1115/1.4004906
|
[29]
|
Khalkhali, A., Farajpoor, M. and Safikhani, H. (2011) Modeling and Mul-ti-Objective Optimization of Forward-Curved Blade Centrifugal Fans Using CFD and Neural Networks. Transactions of the Canadian Society for Mechanical Engineering, 35, 63-79. https://doi.org/10.1139/tcsme-2011-0005
|
[30]
|
Cadirci, S., Selenbas, B. and Gunes, H. (2012) Optimization of a Centrifugal Fan Impeller Using Kriging Simulated Annealing. ASME 2011 International Mechanical Engineering Con-gress and Exposition, Denver, 11-17 November 2011, 991-997.
|
[31]
|
Heo, M.W., Kim, J.H., Seo, T.W., et al. (2016) Aerodynamic and Aeroacoustic Optimization for Design of a Forward-Curved Blades Centrifugal Fan. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230, 154-174. https://doi.org/10.1177/0957650915624611
|
[32]
|
Fan, H.G., Zhang, J.S., Zhang, W., et al. (2020) Multiparameter and Multiobjective Optimization Design Based on Orthogonal Method for Mixed Flow Fan. Energies, 13, Article No. 2819. https://doi.org/10.3390/en13112819
|
[33]
|
Yang, X.P., Jiang, B.Y., Wang, J., et al. (2020) Multi-Objective Optimization of Dual-Arc Blades in a Squirrel-Cage fan Using Modified Non-Dominated Sorting Genetic Algorithm. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234, 1053-1068. https://doi.org/10.1177/0957650919898983
|
[34]
|
Xiao, Q.H., Wang, J., Jiang, B.Y., et al. (2022) Multi-Objective Optimization of Squirrel Cage Fan for Range Hood Based on Kriging Model. Proceedings of the Institution of Mechani-cal Engineers, Part C: Journal of Mechanical Engineering Science, 236, 219-232. https://doi.org/10.1177/0954406221995863
|
[35]
|
Dennis, B.H., Egorov, I.N., Han, Z.X., et al. (2000) Mul-ti-Objective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum Gap-to-Chord Ratio. 8th Symposium on Multidisciplinary Analysis and Optimization, Long Beach, 6-8 September 2000, 1. https://doi.org/10.2514/6.2000-4876
|
[36]
|
Ennil, A.B., Al-dadah, R., Mahmoud, S., et al. (2016) Minimization of Loss in Small Scale Axial Air Turbine Using CFD Modeling and Evolutionary Algorithm Optimization. Applied Thermal Engineering, 102, 841-848.
https://doi.org/10.1016/j.applthermaleng.2016.03.077
|
[37]
|
Al jubori, A., Al-dadah, R.K., Mahmoud, S., et al. (2017) Three Dimensional Optimization of Small-Scale Axial Turbine for Low Temperature Heat Source Driven Organic Rankine Cycle. Energy Conversion and Management, 133, 411-426. https://doi.org/10.1016/j.enconman.2016.10.060
|
[38]
|
Wang, Y.Q., Liu, T.Y., Zhang, D., et al. (2021) Du-al-Convolutional Neural Network Based Aerodynamic Prediction and Multi-Objective Optimization of a Compact Tur-bine Rotor. Aerospace Science and Technology, 116, Article ID: 106869. https://doi.org/10.1016/j.ast.2021.106869
|
[39]
|
Cui, Y.F., Geng, Z.Q., Zhu, Q.X., et al. (2017) Review: Mul-ti-Objective Optimization Methods and Application in Energy Saving. Energy, 125, 681-704. https://doi.org/10.1016/j.energy.2017.02.174
|
[40]
|
Zhang, Y.M., Li, J.X., Feng, Z.Y., et al. (2022) Research on Multi-Objective Optimization of Automotive Electronic Water Pump Motor Considering the Factor of Gap Viscous Loss. Structural and Multidisciplinary Optimization, 65, Article No. 243. https://doi.org/10.1007/s00158-022-03352-4
|
[41]
|
Holland, J.H. (1975) Adaptation in Natural and Artificial Sys-tems. University of Michigan, Ann Arbor, 97-109.
|
[42]
|
Deb, K., Pratap, A., Agarwal, S. and Meyarivan T. (2002) A Fast and Elitist Multi-Objective Genetic Algorithm: NSGA- II. IEEE Transactions on Evolutionary Computation, 6, 182-197. https://doi.org/10.1109/4235.996017
|
[43]
|
Kirkpatrick, S., Gelatt, C.D. and Vecchi, M.P. (1983) Optimi-zation by Simulated Annealing. Science, 220, 671-680.
https://doi.org/10.1126/science.220.4598.671
|
[44]
|
Eberhart, R.C. and Kennedy, J. (1995) A New Optimizer Using Particle Swarm Theory. MHS’95 Proceedings of the Sixth International Symposium on Micro Machine and Human Sci-ence, Nagoya, 4-6 October 1995, 39-43.
|
[45]
|
Parikh, T., Mansour, M. and Thévenin, D. (2021) Maximizing the Per-formance of Pump Inducers Using CFD-Based Multi-Objective Optimization. Structural and Multidisciplinary Optimi-zation, 65, Article No. 9.
https://doi.org/10.1007/s00158-021-03108-6
|