滤棒圆周在线估计及控制方法研究
On-Line Measurement and Control Methods Research for Circumference of Cigarette Filter Tip
摘要:
本文实证研究发现:1) 只需要在KDF2滤棒生产线上垂直安装四台激光感应器,测量滤棒四个入射角直径,就能实现滤棒圆周的在线估计;2) 通过区间假设检验、功效函数设计,可以科学地判定烟滤棒圆周是否在标准范围内。本文提出的控制方法对卷烟企业具有借鉴意义。
Abstract:
Through an empirical study of this paper, it is concluded that: 1) on-line measurement of cigarette filter tip can be achieved by installing four laser sensors perpendicularly on the KDF2 cigarette filter tip production line and measuring diameter of these four angles of incidence of cigarette filter tip; 2) whether the circumference of filter tip is reaching the standard criteria can be adjudged scientifically by using interval hypothesis test. Furthermore, the control method presented in this paper can be used for reference for cigarette enterprises.
参考文献
[1]
|
张小英, 李敏 (2006) 基于小波变换的卷烟直径测量法. 高校论坛, 7, 39, 75.
|
[2]
|
胡丹, 李敏 (2002) 卷烟直径非接触测量系统的研究. 四川工业学院学报, 2, 4-6.
|
[3]
|
胡丹, 李敏 (2002) 模糊数学在卷烟直径测量中的应用. 四川工业学院学报, 3, 38-40.
|
[4]
|
茆诗松, 王静龙, 濮晓龙 (2009) 高等数理统计. 高等教育出版社, 北京.
|