无线传感器网络中基于簇间切换的CARQ协议中断概率及能效分析
Outage Probability and Energy Efficiency Analyses of Cooperative ARQ Protocol Based on Inter-Cluster Switching in Wireless Sensor Networks
DOI: 10.12677/CSA.2017.712133, PDF, 下载: 1,459  浏览: 1,723  国家自然科学基金支持
作者: 张 凯*, 王 帆, 王 珂:兰州理工大学计算机与通信学院,甘肃 兰州;黎锁平:兰州理工大学计算机与通信学院,甘肃 兰州;兰州理工大学理学院,甘肃 兰州
关键词: 协作通信ARQ技术中继选择与切换中断概率能量效率Cooperative Communication ARQ Technology Relay Selection and Switching Outage Probability
摘要: 为了进一步提高传感器网络中无线传输的可靠性以及获得较高的能量效率,提出了一种基于簇间切换的CARQ协议。该协议首先对每个簇内的多个中继进行以信道容量为指标的择优选取。然后对每个簇中选取的最优中继构成的中继链路S-Ri-D引入链路的稳态选择,分析了各个链路被选中的稳态概率。最后结合簇内选取的最优中继的链路中断概率,以传感器网络为研究模型,分析了两个簇之间进行切换的系统的中断概率和能量效率。通过分析和仿真证实了所提协议能够更好的保障系统的传输效率,特别是随着各个簇内成员数目增多时能显著的改善系统的性能。
Abstract: In order to further improve the reliability of wireless transmission in sensor networks and obtain high energy efficiency, a CARQ protocol based on inter-cluster switching is proposed. The protocol first selects optimal relay in each cluster with the channel capacity as the index. Then, the steady-state selection probability of the link of the communication link S-Ri-D is analyzed. Finally, the sensor network is used as the research model, and the outage probability and energy efficiency of the system are analyzed when inter-cluster switch. The analysis and simulation show that the proposed protocol can better guarantee the transmission efficiency of the system. Especially when the number of members in each cluster increases, the performance of the system can be improved remarkably.
文章引用:张凯, 黎锁平, 王帆, 王珂. 无线传感器网络中基于簇间切换的CARQ协议中断概率及能效分析[J]. 计算机科学与应用, 2017, 7(12): 1181-1191. https://doi.org/10.12677/CSA.2017.712133

参考文献

[1] 匡哲君. 无线传感器网络节能策略的研究[D]: [博士学位论文]. 吉林: 吉林大学, 2014.
[2] Li, S.P., Zhou, Y.Q. and Zhou, Y. (2014) Delay and Energy Efficiency Analysis of Multicast Cooperative ARQ over Wireless Networks. Acta Informatica, 51, 51-60.
https://doi.org/10.1007/s00236-013-0192-4
[3] 胡映波, 蔡跃明, 龚坚. 无线传感器网络中基于放大转发的机会协同ARQ协议吞吐量及能效分析[J]. 电路与系统学报, 2012, 17(3): 102-109.
[4] Byun, D., Rhee, Y. and Sang, J. (2008) Performance Analysis of a Decode-and-Forward based Hybrid-ARQ Protocol. IEEE Military Communications Conference (MILCOM’08), 1-5, 16-19.
[5] Nguyen, H.T. and Nguyen, H.H. (2008) Power-Efficient Cooperative Coding with Hybrid-ARQ Soft Combining for Wireless Sensor Networks in Block-Fading Environment. International Journal of Sensor Networks, 4, 3-12.
https://doi.org/10.1504/IJSNET.2008.019247
[6] Zhang, C., Zhang, J., Wei, G. and Ren, P. (2012) An Efficient Cooperative ARQ Protocol for Wireless Relay Networks. Computer Communications, 36, 105-112.
https://doi.org/10.1016/j.comcom.2012.08.002
[7] 胡映波, 蔡跃明. 无线传感器网络中基于切换与保持节点选择的协同ARQ协议[J]. 通信学报, 2010(11): 17-24.
[8] Zhang, Q.Q., Gao, W.D., Peng, M.G. and Wang, W.B. (2008) Partner Selection Strategies in Cooperative Wireless Networks with Optimal Power Distribution. Journal of China Universities of Posts and Telecommunications, 15, 47-50, 58.
https://doi.org/10.1016/S1005-8885(08)60106-5
[9] Chen, G.J., Tian, Z. and Gong, Y. (2014) Max-Ratio Relay Selection in Secure Buffer-Aided Cooperative Wireless Networks. IEEE Transactions on Information Forensics and Security, 4, 719-729.
https://doi.org/10.1109/TIFS.2014.2307672
[10] Lin, S. and Ma, S.X. (2011) Fast Relay Selection Algorithm Based on Symbol Error Probability. Journal of Computer Applications, 31, 613-616.
https://doi.org/10.3724/SP.J.1087.2011.00613
[11] 孙立悦, 赵晓晖, 虢明. 基于中断概率的协作通信中继选择与功率分配算法[J]. 通信学报, 2013, 34(10): 84-91.
[12] 徐建成, 史浩山, 王结太. 无线传感器网络中分集传输的ARQ协议能耗分析[J]. 计算机工程与应用, 2009, 45(7): 4-7.
[13] Cui, H.Y., Song, L.Y. and Jiao, B.L. (2014) Weighted Bidirectional Relay Selection for Outdated Channel State Information. IEEE Transactions on Communications, 62, 500-509.
https://doi.org/10.1109/TCOMM.2014.010414.120940
[14] Jamshidi, A. and Nasiri-Kenari, M (2008) Performance Analysis of Transmitter-Side Cooperative-Receiver-Side-Relaying Schemes for Heterogeneous Sensor Networks. IEEE Transactions on Vehicular Tech, 57, 1548-1563.
https://doi.org/10.1109/TVT.2007.909299