基于模糊控制理论的数控加工参数的自适应控制研究Adaptive Control of CNC Machining Parameters Based on Fuzzy Control Theory
刘恒丽 下载量: 658 浏览量: 1,269
动力系统与控制 Vol.10 No.2, March 31 2021, PDF, HTML, XML DOI:10.12677/DSC.2021.102011 被引量
数控技术课程中超硬材料切削加工所涉及的关键问题的引入Introduction of Key Problems in Super Hard Material Cutting in NC Technology Course
董新峰, 仇中柱, 韩清鹏 下载量: 804 浏览量: 2,973
教育进展 Vol.9 No.3, May 29 2019, PDF, HTML, XML DOI:10.12677/AE.2019.93063 被引量
悬索桥索鞍索槽曲面数控加工技术研究与探讨Research and Discussion on NC Machining Technology of Saddle Cable Groove Surface of Suspension Bridge Cable
董小亮, 唐长平, 刘令娴 下载量: 364 浏览量: 775
机械工程与技术 Vol.10 No.5, October 28 2021, PDF, HTML, XML DOI:10.12677/MET.2021.105062 被引量
数控铣削加工参数离线–在线优化研究及应用Research and Application of Off-Online Optimization of CNC Machining Parameter
刘恒丽, 王 勇, 董靖川, 刘日鑫 下载量: 516 浏览量: 968
机械工程与技术 Vol.9 No.1, February 25 2020, PDF, , DOI:10.12677/MET.2020.91002 被引量
“互联网+”视域下高职智慧课堂教学模式的研究与应用——以《数控加工与编程》课程为例Research and Application of the Intelligent Classroom Teaching Mode in Higher Vocational Education under the Perspective of Internet Plus—Taking the Course of Numerical Control Machining and Programming as an Example
兰叶深, 徐文俊, 徐建亮, 刘文军 下载量: 553 浏览量: 1,221 科研立项经费支持
职业教育 Vol.9 No.2, April 15 2020, PDF, HTML, XML DOI:10.12677/VE.2020.92019 被引量
旋转超声复合/辅助加工技术的研究与应用Research Results and Applications of Rotating Ultrasonic Composite/Auxiliary Machining
王 涛, 李 晶, 闫志刚, 纪能建, 朱永伟 下载量: 829 浏览量: 1,300 国家自然科学基金支持
机械工程与技术 Vol.9 No.4, August 27 2020, PDF, HTML, XML DOI:10.12677/MET.2020.94035 被引量
叶轮加工中心X轴滑座动态特性分析与优化Dynamic Characteristic Analysis and Optimization of the X Axis Slide of Impeller Machining Center
陈达 下载量: 1,916 浏览量: 3,128 国家科技经费支持
机械工程与技术 Vol.5 No.3, September 26 2016, PDF, , XML DOI:10.12677/MET.2016.53025 被引量
三次三角插值样条曲线的数控插补计算方法An NC Interpolation Calculation Method of Cubic Trigonometric Cardinal Interpolation Spline
张益汉, 宋爱平, 刘祖奇, 邱 林 下载量: 2,581 浏览量: 7,588
机械工程与技术 Vol.4 No.2, June 25 2015, PDF, , XML DOI:10.12677/MET.2015.42016 被引量
同步超声复合电加工振动监测与加电间隙控制Vibration Monitoring and Inter-Electrode Gap Controlling of Synchronizing Ultrasonic Compound Electric Machining
邓正泉, 王 芳, 朱永伟 下载量: 2,206 浏览量: 7,507 国家自然科学基金支持
机械工程与技术 Vol.4 No.4, December 11 2015, PDF, , XML DOI:10.12677/MET.2015.44026 被引量
数控加工中3D表面形貌数字图像处理技术3D Surface Topography Analysis Using Image Processing Technology in NC
陈慧群 下载量: 3,223 浏览量: 9,991 科研立项经费支持
机械工程与技术 Vol.2 No.4, December 30 2013, PDF, , DOI:10.12677/MET.2013.24028 被引量