锂金属负极保护的研究进展
Research Progress of Lithium Metal Anode Protection
DOI: 10.12677/NAT.2021.113020, PDF,    国家自然科学基金支持
作者: 沈晓魏, 钱 涛：南通大学，江苏 南通；苏州大学，江苏 苏州；晏成林：苏州大学，江苏 苏州
关键词: 锂金属负极；锂枝晶；稳定性； Lithium Metal； Lithium Dendrites； Stability
摘要: 随着先进的便携式电子产品、电动汽车、电网储能系统和航天等技术的飞速发展，传统锂离子电池的内在局限性限制了它们在未来巨大能源需求面前的进一步应用。金属锂因其具有高的比容量(3861 mA∙h∙g–1)、最低的电化学势(–3.04 V相对于标准氢电极)和较小的密度(0.534 g∙cm–3)，一直被认为是用于下一代高比能可充电池负极材料中的“圣杯”。但是金属锂负极所存在的固有问题几十年来一直阻碍着它的实际应用，主要包括锂枝晶的形成穿刺隔膜所引起的短路，循环过程中无限的体积变化带来的断路现象，以及不稳定的固态电解质界面膜(SEI)造成的性能衰减、效率低下等问题。更严重的是，这些问题在电池实际工作过程中会相互交织影响，导致锂金属电池性能进一步恶化。而以上问题与锂金属负极界面息息相关，基于此，本文对锂金属负极保护设计及研究进展进行了详细的概述。
Abstract: With the rapid development of advanced portable electronic products, electric vehicles, power grid energy storage systems and aerospace technology, the inherent limitations of traditional lithium ion battery limit their further application in the face of huge energy demand in the future. Metallic lithium has always been considered as the “Holy Grail” anode material for the high-spe- cific-energy rechargeable battery due to the high specific capacity (3861 mA∙h∙g−1), the lowest electrochemical potential (−3.04 V vs. the standard hydrogen electrode), and the lower density (0.534 g∙cm−3). Unfortunately, the inherent problems of lithium metal anodes restraint their practical application for decades, mainly including short circuits caused by the formation of lithium dendrites, open circuits caused by infinite volume changes during cycling, and unstable solid- electrolyte interphase (SEI) layer resulting in performance degradation and low efficiency. More seriously, in the actual working process of the battery, these problems, which are closely related with lithium metal anode interfaces, will interweave and affect each other, resulting in further deterioration of the performance of battery. Herein, the design and research progress of lithium metal anode protection are summarized in detail in this paper.
文章引用：沈晓魏, 晏成林, 钱涛. 锂金属负极保护的研究进展[J]. 纳米技术, 2021, 11(3): 166-183. https://doi.org/10.12677/NAT.2021.113020

参考文献

[1] Goodenough, J.B. (2015) Energy Storage Materials: A Perspective. Energy Storage Materials, 1, 158-161. s://doi.org/10.1016/j.ensm.2015.07.001
[2] Armand, M. and Tarascon, J.M. (2008) Building Better Batteries. Nature, 451, 652-657. s://doi.org/10.1038/451652a
[3] Ding, Y., Zhang, C., Zhang, L., Zhou, Y. and Yu, G. (2019) Pathways to Widespread Applications: Development of Redox Flow Batteries Based on New Chemistries. Chem, 5, 1964-1987. s://doi.org/10.1016/j.chempr.2019.05.010
[4] Zhang, C., Zhang, L., Ding, Y., Peng, S., Guo, S., Zhao, Y., He, G. and Yu, G. (2018) Progress and Prospects of Next-Generation Redox Flow Batteries. Energy Storage Materials, 15, 324-350. s://doi.org/10.1016/j.ensm.2018.06.008
[5] Grand, L., Paillard, E., Hassoun, J., Park, J.B., Lee, Y.J., Sun, Y.K., Passerini, S. and Scorsati, B. (2015) The Lithium/Air Battery: Still an Emerging System or a Practical Reality? Advanced Materials, 27, 784-800. s://doi.org/10.1002/adma.201403064
[6] Goodenough, J.B. and Park, K.S. (2013) The Li-Ion Rechargeable Battery: A Perspective. Journal of the American Chemical Society, 135, 1167-1176. s://doi.org/10.1021/ja3091438
[7] Zhang, X.Q., Zhao, C.Z., Huang, J.K. and Zhang, Q. (2018) Recent Ad-vances in Energy Chemical Engineering of Next-Generation Lithium Batteries. Engineering, 4, 831-847. s://doi.org/10.1016/j.eng.2018.10.008
[8] Nitta, N., Wu, F., Lee, J.T. and Gleb, Y. (2015) Li-Ion Battery Mate-rials: Present and Future. Materials Today, 18, 252-264. s://doi.org/10.1016/j.mattod.2014.10.040
[9] Bruce, P.G., Freunberger, S.A., Hardwick, L.J. and Tarascon, J.M. (2012) Li-O2 and Li-S Batteries with High Energy Storage. Nature Materials, 11, 19-29. s://doi.org/10.1038/nmat3191
[10] Cao, R., Xu, W., Lv, D., Xiao, J. and Zhang, J.G. (2015) Anodes for Rechargeable Lithium-Sulfur Batteries. Advanced Energy Materials, 5, Article ID: 1402273. s://doi.org/10.1002/aenm.201402273
[11] Shi, P., Li, T., Zhang, R., Shen, X., Cheng, X.B., Xu, R., Huang, J.Q., Chen, X.R., Liu, H. and Zhang, Q. (2019) Lithiophilic LiC6 Layers on Carbon Hosts Enabling Stable Li Metal Anode in Working Batteries. Advanced Materials, 31, Article ID: 1807131. s://doi.org/10.1002/adma.201807131
[12] Al-bertus, P., Babinec, S., Litzelman, S. and Newman, A. (2018) Status and Challenges in Enabling the Lithium Metal Elec-trode for High-Energy and Low-Cost Rechargeable Batteries. Nature Energy, 3, 16-21. s://doi.org/10.1038/s41560-017-0047-2
[13] Yan, C., Li, H.R., Chen, X., Zhang, X.Q., Cheng, X.B., Xu, R., Huang, J.Q. and Zhang, Q. (2019) Regulating the Inner Helmholtz Plane for Stable Solid Electrolyte Interphase on Lith-ium Metal Anodes. Journal of the American Chemical Society, 141, 9422-9429. s://doi.org/10.1021/jacs.9b05029
[14] Wang, X., Tan, Y., Shen, G. and Zhang, S. (2020) Recent Progress in Fluorinated Electrolytes for Improving the Performance of Li–S Batteries. Journal of Energy Chemistry, 41, 149-170. s://doi.org/10.1016/j.jechem.2019.05.010
[15] Brissot, C., Rossom, M., Chazalviel, J.N. and Lascaud, S. (1999) Dendritic Growth Mechanisms in Lithium/Polymer Cells. Journal of Power Sources, 81, 925-929. s://doi.org/10.1016/S0378-7753(98)00242-0
[16] Sand, H.J. (1901) On the Concentration at the Electrodes in a Solution, with Special Reference to the Liberation of Hydrogen by Electrolysis of a Mixture of Copper Sulphate and Sulphuric Acid. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 1, 45-79. s://doi.org/10.1080/14786440109462590
[17] Chazalviel, J.N. (1990) Electrochemical Aspects of the Generation of Ramified Metallic Electrodeposits. Physical Review A, 42, 7355-7367. s://doi.org/10.1103/PhysRevA.42.7355
[18] Chang, H.J., Llott, A.J., Trease, N.M., Mohammadi, M., Jerschow, A. and Grey, C.P. (2015) Correlating Microstructural Lithium Metal Growth with Electrolyte Salt Depletion in Lithium Batteries Using 7Li MRI. Journal of the American Chemical Society, 137, 15209-15216. s://doi.org/10.1021/jacs.5b09385
[19] Bai, P., Li, J., Brushett, F.R. and Bazant, M.Z. (2016) Transition of Lith-ium Growth Mechanisms in Liquid Electrolytes. Energy & Environmental Science, 9, 3221-3229. s://doi.org/10.1039/C6EE01674J
[20] Harry, K.J., Hallinan, D.T., Parkinson, D.Y., MacDowell, A.A. and Bal-sara, N.P. (2014) Detection of Subsurface Structures Underneath Dendrites Formed on Cycled Lithium Metal Electrodes. Nature Materials, 13, 69-73. s://doi.org/10.1038/nmat3793
[21] Dornbusch, D.A., Hilton, R., Lohman, S.D. and Suppes, G.J. (2014) Exper-imental Validation of the Elimination of Dendrite Short-Circuit Failure in Secondary Lithium-Metal Convection Cell Bat-teries. Journal of the Electrochemical Society, 162, Article No. A262. s://doi.org/10.1149/2.0021503jes
[22] Dusastre, V. (2010) Materials for Sustainable Energy: A Collection of Peer-Reviewed Research and Review Articles from Nature Publishing Group. World Scientific, Singapore. s://doi.org/10.1142/7848
[23] Chen, K.H., Wood, K.N., Kazyak, E., Lepage, W.S., Davis, A.L., Sanchez, A.J. and Dasgupta, N.P. (2017) Dead Lithium: Mass Transport Effects on Voltage, Capacity, and Failure of Lithium Metal Anodes. Journal of Materials Chemistry A, 5, 11671-11681. s://doi.org/10.1039/C7TA00371D
[24] Sun, F., Zielke, L., Markötter, H., Hilger, A., Zhou, D., Moroni, R., Zengerle, R., Thiele, S., Banhart, J. and Manke, I. (2016) Morphological Evolution of Electrochemically Plated/Stripped Lithium Microstructures Investigated by Synchrotron X-ray Phase Contrast Tomography. ACS Nano, 10, 7990-7997. s://doi.org/10.1021/acsnano.6b03939
[25] Aurbach, D.,Talyosefa, Y., Markovskya, B., Markevicha, E., Zi-nigrada, E., Asrafa, L., Gnanaraja, J.S. and Kimb, H.J. (2004) Design of Electrolyte Solutions for Li and Li-Ion Batteries: A Review. Electrochimica Acta, 50, 247-254. s://doi.org/10.1016/j.electacta.2004.01.090
[26] Peled, E. (1979) The Electrochemical Behavior of Alkali and Al-kaline Earth Metals in Nonaqueous Battery Systems-The Solid Electrolyte Interphase Model. Journal of the Electro-chemical Society, 126, 2047-2051. s://doi.org/10.1149/1.2128859
[27] Dey, A. (1970) Film Formation on Lithium Anode in Propylene Carbonate. Journal of the Electrochemical Society, 117, Article No. 08534.
[28] Cheng, X.B., Zhang, R., Zhao, C.Z., Wei, F., Zhang, J.G. and Zhang Q. (2016) A Review of Solid Electrolyte Interphases on Lithium Metal Anode. Advanced Science, 3, Article ID: 1500213. s://doi.org/10.1002/advs.201500213
[29] Cohen, Y.S., Cohen, Y. and Aurbach, D. (2000) Micromorphological Studies of Lithium Electrodes in Alkyl Carbonate Solutions Using in Situ Atomic Force Mi-croscopy. The Journal of Physical Chemistry B, 104, 12282-12291. s://doi.org/10.1021/jp002526b
[30] Shi, S., Lu, P., Liu, Z., Qi, Y., Hector, L.G., Li, H. and Harris, S.J. (2012) Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase. Journal of the American Chemical Society, 134, 15476-15487. s://doi.org/10.1021/ja305366r
[31] Lu, D., Shao, Y., Lozano, T., Bennett, W.D., Graff, D.L., Polzin, B., Zhang, J., Engelhard, M.H., Saenz, N.T., Henderson, W.A., Bhattacharya, P., Liu, J. and Xiao, J. (2015) Failure Mechanism for Fast-Charged Lithium Metal Batteries with Liquid Electrolytes. Advanced Energy Materials, 5, Article ID: 1400993. s://doi.org/10.1002/aenm.201400993
[32] Zhang, X., Yang, Y. and Zhou, Z. (2020) Towards Practical Lithi-um-Metal Anodes. Chemical Society Reviews, 49, 3040-3071. s://doi.org/10.1039/C9CS00838A
[33] Hirshberg, D., Sharon, D., Llave, E.D.L., Afri, M., Frimer, A.A., Kwak, W.J., Sun, Y.K. and Aurbachet, D. (2017) Feasibility of Full (Li-Ion)-O2 Cells Comprised of Hard Carbon Anodes. ACS Applied Materials & Interfaces, 9, 4352-4361. s://doi.org/10.1021/acsami.6b10974
[34] Hagen, M., Quiroga-González, E., Dörfler, S., Fahrer, G., Tübke, J., Hoffmann, M.J., Althues, H., Speck, R., Krampfert, M., Kaskel, S. and Föll, H. (2014) Studies on Preventing Li Den-drite Formation in Li-S Batteries by Using Pre-Lithiated Si Microwire Anodes. Journal of Power Sources, 248, 1058-1066. s://doi.org/10.1016/j.jpowsour.2013.09.144
[35] Wu, S., Zhu, K., Tang, J., Liao, K., Bai, S., Yi, J., Yamauchi, Y., Ishida, M. and Zhou, H. (2016) A Long-Life Lithium Ion Oxygen Battery Based on Commercial Silicon Particles as the Anode. Energy & Environmental Science, 9, 3262-3271. s://doi.org/10.1039/C6EE01512C
[36] Guo, Z.Y., Dong, X.L., Wang, Y.G. and Xia, Y.Y. (2015) A Lithium Air Battery with a Lithiated Al-Carbon Anode. Chemical Communications, 51, 676-678. s://doi.org/10.1039/C4CC07315K
[37] Sun, F., Zhou, D., He, X., Osenberg, M., Dong, K., Chen, L.B., Mei, S.L., Hilger, A., Markotter, H., Lu, Y., Dong, S.M., Marathe, S., Rau, C., Hou, X., Stan, M.C., Winter, M., Dominko, R. and Manke, I. (2019) Morphological Reversibility of Modified Li-Based Anodes for Next-Generation Batteries. ACS Energy Letters, 5, 152-161. s://doi.org/10.1021/acsenergylett.9b02424
[38] Zhang, R., Cheng, X.B., Zhao, C.Z., Peng, H.J., Shi, J.L., Huang, J.Q., Wang, J.F., Wei, F. and Zhang, Q. (2016) Conductive Nanostructured Scaffolds Render Low Local Current Densi-ty to Inhibit Lithium Dendrite Growth. Advanced Materials, 28, 2155-2162. s://doi.org/10.1002/adma.201504117
[39] Yang, C.P., Yin, Y.X., Zhang, S.F., Li, N.W. and Gou, Y.G. (2015) Accommodating Lithium into 3D Current Collectors with a Submicron Skeleton towards Long-Life Lithium Metal An-odes. Nature Communications, 6, Article No. 8058. s://doi.org/10.1038/ncomms9058
[40] Xu, W., Wang, J., Chen, X., Nasybulin, E., Zhang, Y. and Zhang, J.G. (2014) Lithium Metal Anodes for Rechargeable Batteries. Energy & Environmental Science, 7, 513-537. s://doi.org/10.1039/C3EE40795K
[41] Yun, J., Park, B., Won, E., Choi, S., Kang, H., Kim, J., Park, M. and Lee, J. (2020) Bottom-Up Lithium Growth Triggered by Interfacial Activity Gradient on Porous Framework for Lithium-Me. ACS Energy Letters, 5, 3108-3114. s://doi.org/10.1021/acsenergylett.0c01619
[42] Zhu, J., Chen, J., Luo, Y., Sun, S., Qin, L., Xu, H., Zhang, P., Zhang, W., Tian, W. and Sun, Z. (2019) Lithiophilic Metallic Nitrides Modified Nickel Foam by Plasma for Stable Lith-ium Metal Anode. Energy Storage Materials, 23, 539-546. s://doi.org/10.1016/j.ensm.2019.04.005
[43] Zhang, X., Wang, A., Lv, R. and Luo, J. (2019) A Corrosion-Resistant Current Collector for Lithium Metal Anodes. Energy Storage Materials, 18, 199-204. s://doi.org/10.1016/j.ensm.2018.09.017
[44] Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F. and Yang, Q. (2016) Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes. Advanced Materials, 28, 6932-6939. s://doi.org/10.1002/adma.201601409
[45] Qiu, H., Tang, T., Asif, M., Huang, X. and Hou, Y. (2019) 3D Porous Cu Current Collectors Derived by Hydrogen Bubble Dynamic Template for Enhanced Li Metal Anode Performance. Advanced Functional Materials, 29, Article ID: 1808468. s://doi.org/10.1002/adfm.201808468
[46] Wang, L.-M., Tang, Z.-F., Lin, J., He, X.-D., Chen, C.-S. and Chen, C.-H. (2019) A 3D Cu Current Collector with a Biporous Structure Derived by a Phase Inversion Tape Casting Method for Stable Li Metal Anodes. Journal of Materials Chemistry A, 7, 17376-17385. s://doi.org/10.1039/C9TA05357C
[47] Qin, K., Baucom, J., Liu, D., Shi, W., Zhao, N. and Lu, Y. (2020) A Powder Metallurgic Approach toward High-Performance Lithium Metal Anodes. Small, 16, Article ID: 2000794. s://doi.org/10.1002/smll.202000794
[48] Chi, S.-S., Wang, Q.R., Han, B., Luo, C., Jiang, Y.D., Wang, J., Wang, C.Y., Yu, Y. and Deng, Y.H. (2020) Lithiophilic Zn Sites in Porous CuZn Alloy Induced Uniform Li Nucleation and Dendrite-Free Li Metal Deposition. Nano Letters, 20, 2724-2732. s://doi.org/10.1021/acs.nanolett.0c00352
[49] Zhao, F., Zhou, X., Deng, W. and Liu, Z. (2019) Entrapping Lith-ium Deposition in Lithiophilic Reservoir Constructed by Vertically Aligned ZnO Nanosheets for Dendrite-Free Li Metal Anodes. Nano Energy, 62, 55-63. s://doi.org/10.1016/j.nanoen.2019.04.087
[50] Zhang, Z., Wang, J., Yan, X., Zhang, S., Yang, W., Zhuang, Z. and Han, W. (2020) In-Situ Growth of Hierarchical N-Doped CNTs/Ni Foam Scaffold for Dendrite-Free Lithium Metal Anode. Energy Storage Materials, 29, 332-340. s://doi.org/10.1016/j.ensm.2020.04.022
[51] Liu, F., Wang, L., Zhang, Z., Shi, P., Feng, Y., Yao, Y., Ye, S., Wang, H., Wu, X. and Yu, Y. (2020) A Mixed Lithium-Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode. Advanced Functional Materials, 30, Article ID: 2001607. s://doi.org/10.1002/adfm.202001607
[52] Zhang, X.-Q., Li, T., Li, B.-Q., Zhang, R., Shi, P., Yan, C., Huang, J.-Q. and Zhang, Q. (2020) A Sustainable Solid Electrolyte Interphase for High-Energy-Density Lithium Metal Batteries under Practical Conditions. Angewandte Chemie International Edition, 59, 3252-3257. s://doi.org/10.1002/anie.201911724
[53] Li, Y., Sun, Z., Liu, D., Gao, Y., Wang, Y., Bu, H., Li, M., Zhang, Y., Gao, G. and Ding, S. (2020) A Composite Solid Polymer Electrolyte Incorporating MnO2 Nanosheets with Reinforced Mechanical Properties and Electrochemical Stability for Lithium Metal Batteries. Journal of Materials Chemistry A, 8, 2021-2032. s://doi.org/10.1039/C9TA11542K
[54] Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C. and Huang, J. (2018) Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode. Advanced Functional Materials, 28, Article ID: 1705838. s://doi.org/10.1002/adfm.201705838
[55] Li, Y., Huang, W., Li, Y., Pei, A., Boyle, D. and Cui, Y. (2018) Cor-relating Structure and Function of Battery Interphases at Atomic Resolution Using Cryoelectron Microscopy. Joule, 2, 2167-2177. s://doi.org/10.1016/j.joule.2018.08.004
[56] Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S., Amine, K., Xu, K. and Wang, C. (2018) Non-Flammable Electrolyte Enables Li-Metal Batteries with Aggressive Cathode Chemistries. Nature Nanotechnology, 13, 715-722. s://doi.org/10.1038/s41565-018-0183-2
[57] Yu, Z., Wang, H., Kong, X., Huang, W., Tsao, Y., Mackanic, D., Wang, K., Wang, X., Huang, W., Choudhury, S., Zheng, Y., Amanchukwu, C., Hung, S., Ma, Y., Lomeli, E., Qin, J., Cui, Y. and Bao, Z. (2020) Molecular Design for Electrolyte Solvents Enabling Energy-Dense and Long-Cycling Lithium Metal Batteries. Nature Energy, 5, 526-533. s://doi.org/10.1038/s41560-020-0634-5
[58] Liu, S., Ji, X., Yue, J., Hou, S., Wang, P., Cui, C., Chen, J., Shao, B., Li, J., Han, F., Tu, J. and Wang, C. (2020) High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batter-ies. Journal of the American Chemical Society, 142, 2438-2447. s://doi.org/10.1021/jacs.9b11750
[59] Ye, H., Yin, Y.-X., Zhang, S.-F., Shi, Y., Liu, L., Zeng, X.-X., Wen, R., Guo, Y.-G. and Wan, L.-J. (2017) Synergism of Al-Containing Solid Electrolyte Interphase Layer and Al-Based Colloidal Particles for Stable Lithium Anode. Nano En-ergy, 36, 411-417. s://doi.org/10.1016/j.nanoen.2017.04.056
[60] Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T. and Zhang, Q. (2017) Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries. Chem, 2, 258-270. s://doi.org/10.1016/j.chempr.2017.01.003
[61] Zhao, Q., Tu, Z., Wei, S., Zhang, K., Choudhury, S., Liu, X. and Archer, P. (2018) Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries. Angewandte Chemie International Edition, 57, 992-996. s://doi.org/10.1002/anie.201711598
[62] Kitaura, H. and Zhou, H. (2015) All-Solid-State Lithium-Oxygen Bat-tery with High Safety in Wide Ambient Temperature Range. Scientific Reports, 5, Article No. 13271. s://doi.org/10.1038/srep13271
[63] DeWees, R. and Wang, H. (2019) Synthesis and Properties of Na-SICON-Type LATP and LAGP Solid Electrolytes. ChemSusChem, 12, 3713-3725. s://doi.org/10.1002/cssc.201900725
[64] Canepa, P., Dawson, J., Gautam, G., Statham, J., Parker, S. and Islam, M. (2018) Particle Morphology and Lithium Segregation to Surfaces of the Li7La3Zr2O12 Solid Electrolyte. Chemistry of Materials, 30, 3019-3027. s://doi.org/10.1021/acs.chemmater.8b00649
[65] Xie, H., Li, C., Kan, W., Avdeev, M., Zhu, C., Zhao, Z., Chu, X., Mu, D. and Wu, F. (2019) Consolidating the Grain Boundary of the Garnet Electrolyte LLZTO with Li3BO3 for High-Performance LiNi0.8Co0.1Mn0.1O2/LiFePO4 Hybrid Solid Batteries. Journal of Materials Chemistry A, 7, 20633-20639. s://doi.org/10.1039/C9TA03263K
[66] Chen, M., Huang, C., Li, Y., Jiang, S., Zeng, P., Chen, G., Shu, H., Liu, H., Li, Z. and Wang, X. (2019) Perovskite-Type La0.56Li0.33TiO3 as an Effective Polysulfide Promoter for Stable Lithium-Sulfur Batteries in Lean Electrolyte Conditions. Journal of Materials Chemistry A, 7, 10293-10302. s://doi.org/10.1039/C9TA01500K
[67] Bates, J.B., Dudney, N.J., Gruzalski, G.R., Zuhr, R.A.,Choudhury, A., Luck, C.F. and Robertson, J.D. (1993) Fabrication and Characterization of Amorphous Lithium Electrolyte Thin Films and Rechargeable Thin-Film Batteries. Journal of Power Sources, 43, 103-110. s://doi.org/10.1016/0378-7753(93)80106-Y
[68] Tatsumisago, M., Takano, R., Tadanaga, K. and Hayashi, A. (2014) Preparation of Li3BO3-Li2SO4 Glass-Ceramic Electrolytes for All-Oxide Lithium Batteries. Journal of Power Sources, 270, 603-607. s://doi.org/10.1016/j.jpowsour.2014.07.061
[69] Kennedy, J.H. (1989) Ionically Conductive Glasses Based on SiS2. Materials Chemistry and Physics, 23, 29-50. s://doi.org/10.1016/0254-0584(89)90015-1
[70] Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K. and Mitsui, A. (2011) A Lithium Superionic Con-ductor. Nature Materials, 10, 682-686. s://doi.org/10.1038/nmat3066
[71] Yu, C., Li, Y., Willans, M., Zhao, Y., Adair, K., Zhao, F., Li, W., Deng, S., Liang, J., Banis, M., Li, R., Huang, H., Zhang, L., Yang, R., Lu, S., Huang, Y. and Sun, X. (2020) Superionic Conduc-tivity in Lithium Argyrodite Solid-State Electrolyte by Controlled Cl-Doping. Nano Energy, 69, Article ID: 104396. s://doi.org/10.1016/j.nanoen.2019.104396
[72] Zhou, L., Assoud, A., Zhang, Q., Wu, X. and Nazar, L. (2019) New Family of Argyrodite Thioantimonate Lithium Superionic Conductors. Journal of the American Chemical Society, 141, 19002-19013. s://doi.org/10.1021/jacs.9b08357
[73] Zhao, Y. and Daemen, L. (2012) Superionic Conductivity in Lithium-Rich Anti-Perovskites. Journal of the American Chemical Society, 134, 15042-15047. s://doi.org/10.1021/ja305709z
[74] Asano, T., Sakai, A., Ouchi, S., Sakaida, M., Miyazaki, A. and Hasegawa, S. (2018) Solid Halide Electrolytes with High Lithium-Ion Conductivity for Application in 4V Class Bulk-Type All-Solid-State Batteries. Advanced Materials, 30, Article ID: 1803075. s://doi.org/10.1002/adma.201803075
[75] Park, K.-H., Kaup, K., Assoud, A., Zhang, Q., Wu, X.H. and Nazar, L.F. (2020) High-Voltage Superionic Halide Solid Electrolytes for All-Solid-State Li-Ion Batteries. ACS Energy Letters, 5, 533-539. s://doi.org/10.1021/acsenergylett.9b02599
[76] Li, X., Liang, J., Luo, J., Banis, M., Wang, C., Li, W., Deng, S., Yu, C., Zhao, F., Hu, Y., Sham, T.-K., Zhang, L., Zhao, S., Lu, S., Huang, H., Li, R., Adair, K. and Sun, X. (2019) Air-Stable Li3InCl6 Electrolyte with High Voltage Compatibility for All-Solid-State Batteries. Energy & Environmental Science, 12, 2665-2671. s://doi.org/10.1039/C9EE02311A
[77] Li, Y., Liu, M., Liu, K. and Wang, C. (2013) High Li+ Conduction in NASICON-Type Li1+xYxZr2−x(PO4)3 at Room Temperature. Journal of Power Sources, 240, 50-53. s://doi.org/10.1016/j.jpowsour.2013.03.175
[78] Lu, Y., Meng, X., Alonso, J., Fernandez-Diaz, M. and Sun, C. (2019) Effects of Fluorine Doping on Structural and Electrochemical Properties of Li6.25Ga0.25La3Zr2O12 as Electrolytes for Solid-State Lithium Batteries. ACS Applied Materials & Interfaces, 11, 2042-2049. s://doi.org/10.1021/acsami.8b17656
[79] Fenton, D.E. (1973) Complexes of Alkali Metal Ions with Poly(Ethylene Oxide). Polymer, 14, 589. s://doi.org/10.1016/0032-3861(73)90146-8
[80] Yuan, F., Chen, H.-Z., Yang, H.-Y., Li, H.-Y. and Wang, M. (2005) PAN-PEO Solid Polymer Electrolytes with High Ionic Conductivity. Materials Chemistry and Physics, 89, 390-394. s://doi.org/10.1016/j.matchemphys.2004.09.032
[81] Lin, D., Liu, W., Liu, Y., Lee, H.R., Hsu, P.-H., Liu, K. and Cui, Y. (2016) High Ionic Conductivity of Composite Solid Polymer Electrolyte via in Situ Synthesis of Monodis-persed SiO2 Nanospheres in Poly(Ethylene Oxide). Nano Letters, 16, 459-465. s://doi.org/10.1021/acs.nanolett.5b04117

为你推荐