高强度42CrMo钢立铣切削力实验与建模Study on Prediction and Model of Milling Force of 42CrMo Steel
唐德文, 张文明, 赵瑞兰, 彭聪 科研立项经费支持
仪器与设备Vol.4 No.3, 全文下载: PDF HTML XML DOI:10.12677/IaE.2016.43009, September 29 2016
GH4169合金的铣削过程及刀具磨损下的热力耦合研究Milling Process of GH4169 Alloy and Thermodynamic Coupling Study under Tool Wear
段士伟, 李 萍, 康敬波, 史广源, 崔敏超
建模与仿真Vol.12 No.1, 全文下载: PDF HTML XML DOI:10.12677/MOS.2023.121023, January 19 2023
SiCp/Al复合材料铣削仿真及实验研究Simulation and Experimental Study on Milling of SiCp/Al Composites
孙时杰, 陈宗玉, 刘德亮, 柳苏洋
建模与仿真Vol.13 No.1, 全文下载: PDF HTML XML DOI:10.12677/MOS.2024.131009, January 9 2024
基于PCD刀具的TA15钛合金精密铣削工艺优化及刀具磨损研究Process Optimization and Tools Wear of Precision Milling of TA15 Titanium Alloy Based on PCD Tools
罗育银, 段周波
机械工程与技术Vol.12 No.5, 全文下载: PDF HTML XML DOI:10.12677/MET.2023.125051, October 23 2023
正交面齿轮齿面铣削加工与测量分析研究Study of Orthogonal Gear Tooth Milling and Measurement Analysis
李同杰, 靳广虎, 苏 阔, 李晓贞 科研立项经费支持
机械工程与技术Vol.12 No.3, 全文下载: PDF HTML XML DOI:10.12677/MET.2023.123025, June 5 2023
基于多目标灰狼算法的H13模具钢铣削工艺优化研究Research on Optimization of H13 Die Steel Milling Process Based on Multi-Objective Grey Wolf Algorithm
卢相林, 江小辉, 汪 龙, 郭淼现, 罗 超, 林志俭 国家自然科学基金支持
运筹与模糊学Vol.13 No.2, 全文下载: PDF HTML XML DOI:10.12677/ORF.2023.132111, April 24 2023