文章引用说明 更多>> (返回到该文章)

Raman, A., Quinones, R., Barriger, L., et al. (2010) Understanding organic film behavior on alloy and metal oxides. Langmuir, 26, 1747-1754.

被以下文章引用:

  • 标题: 硬脂酸改性NiO-TiO2薄膜的摩擦学性能Tribological Performance of Chemical Modification of NiO-TiO2 Films by Stearic Acid

    作者: 王艳艳, 高建国, 董志伟, 万勇

    关键字: NiO-TiO2, 硬脂酸, 溶胶–凝胶, 自组装, 摩擦学性能NiO-TiO2, Stearic Acid, Sol-Gel, Self Assembled, Tribological Performance

    期刊名称: 《Advances in Material Chemistry》, Vol.3 No.1, 2015-02-17

    摘要: 利用溶胶–凝胶技术结合自组装技术在45#钢表面制备了具有优异减摩耐磨性能的有机–无机复合薄膜。首先采用溶胶–凝胶技术在钢基底上制备NiO-TiO2薄膜,然后再用自组装技术在薄膜表面沉积硬脂酸分子获得有机–无机复合薄膜。利用接触角测量仪和X射线粉末衍射仪研究了薄膜的润湿性和晶体结构,用微纳摩擦磨损试验机研究了薄膜在干摩擦条件下与轴承钢球往复滑动的摩擦学性能。结果发现,经硬脂酸改性后得到的双层薄膜呈现高疏水状态,对水接触角达135°,具有优异的摩擦学性能。 The inorganic-organic composite films with friction reduction and wear resistance were fabricated on 45# steel using sol-gel technology combined with self assembled technology. The thin films of NiO-TiO2 were firstly prepared on steel via a sol-gel method. The stearic acid was then deposited on the NiO-TiO2 films to obtain an organic-inorganic composite film. The contact angle measurements and X-ray diffraction were used to investigate the films’ wetting behavior and crystalline structure, respectively. Their tribological performance was evaluated by a micro tribotester. The results indicate that the composite film shows high hydrophobicity with a water contact angle of 135˚ and good friction-reducing performance.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享