文章引用说明 更多>> (返回到该文章)

张青, 吕玉珍, 汪佛池, 等. 采用超憎水性涂层缓解导线表面覆冰的实验研究[J]. 现代电力, 2010, 27(6): 31-34.

被以下文章引用:

• 标题: 一种制备铝基复合材料疏水导线的方法A Preparation Method of Aluminum Matrix Composites’ Hydrophobic Wire

  作者: 谢文丽, 张志红, MehdiFattahi, 王茂成, 陈海亮, 王冠宇, 王硕, 王晓涵

  关键字: 疏水导线, 静态接触角, 电导率Hydrophobic Conductor, Static Contact Angle, Electrical Conductivity

  期刊名称: 《Advances in Energy and Power Engineering》, Vol.4 No.3, 2016-06-23

  摘要: 利用累积复合轧制法(ARB方法)制作出不同混合比例的4043铝/石墨烯纳米复合材料(累积复合轧制法可被看作是若干个单道次压下量为50%的轧制复合的往复循环)，测试得到了不同比例的4043铝/石墨烯复合材料的电导率和静态接触角，发现随着石墨烯掺杂的比例增大，石墨烯/铝复合材料的静态接触角明显提高，电导率略有降低。 We have made grapheme sheets/4043 aluminum nanocomposites of different mixing ratios by using accumulative roll bonding (ARB) method. ARB method can be regarded as a number of single channel reductions of 50 percent reciprocating cycle. The electrical conductivity and the static contact angle of the different proportions of graphene sheets/4043 aluminum composites were obtained by testing. We have found that as the proportion of graphene doping increases, the static contact angle of graphene sheets/aluminum composites significantly increases, and conductivity slightly decreases.