两爪机械抓手的建模与有限元分析Modeling and Finite Element Analysis of Two-Jaw Mechanical Gripper
张小伟, 仲梁维
建模与仿真 Vol.13 No.6, November 20 2024, PDF, , XML DOI:10.12677/mos.2024.136559 被引量
不考虑内流影响的悬跨管道涡激振动模态分析Vortex-Induced Vibration Modal Analysis of Free Spanning Pipelines without Considering the Effect of Internal Flow
徐学波, 刘晓亮
仪器与设备 Vol.9 No.3, August 31 2021, PDF, HTML, XML DOI:10.12677/IaE.2021.93012 被引量
大学生手机依赖倾向问卷的编制Development of Mobile Phone Dependence Questionnaire for Undergraduates
刘瑞婷, 任怡安, 李佳瑜 国家自然科学基金支持
心理学进展 Vol.8 No.8, August 13 2018, PDF, HTML, XML DOI:10.12677/AP.2018.88129 被引量
变电站挂轨巡检机器人升降台动态特性分析Dynamic Characteristic Analysis of the Lifting Platform of a Track-Hanging Inspection Robot in Substation
易发伟, 吕林源, 黄子聪, 李 航, 朱思邈, 马腾原, 陈熙林
电气工程 Vol.9 No.4, December 29 2021, PDF, HTML, XML DOI:10.12677/JEE.2021.94019 被引量
基于灰色关联法的导线综合选型分析研究Analysis and Research on the Comprehensive Selection of Wire Based on Grey Correlation Method
赵博辉, 宋斌
输配电工程与技术 Vol.6 No.1, March 31 2017, PDF, HTML, XML DOI:10.12677/TDET.2017.61002 被引量
连续管道弯头应力增大系数修正计算及实验研究Correction Calculation and Experimental Study on Stress Intensification Factor of Pipe Elbow
孙 壮, 张红艳
力学研究 Vol.12 No.1, March 30 2023, PDF, HTML, XML DOI:10.12677/IJM.2023.121007 被引量
基于ANSYS Workbench的轴承结构有限元分析Finite Element Analysis of Bearing Structure Based on ANSYS Workbench
顾开创
建模与仿真 Vol.12 No.6, November 28 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.126521 被引量
一类带有饱和发生率和Logistic增长的随机病毒感染模型的灭绝性及平稳分布Extinction and Stationary Distribution of a Classic Stochastic Viral Infection Model with Saturation Rate and Logistic Growth
罗 超, 张晓丹
应用数学进展 Vol.7 No.5, May 25 2018, PDF, HTML, XML DOI:10.12677/AAM.2018.75072 被引量
液力推力器花键联接结构优化设计Optimal Design of Spline Connection Structure of Hydraulic Thruster
郭朝辉, 龚 盼, 冯 定, 王 鹏, 涂忆柳
石油天然气学报 Vol.40 No.1, February 15 2018, PDF, HTML, XML DOI:10.12677/JOGT.2018.401009 被引量
沥青混合料结构参数与蠕变特性关系分析Analysis of Structural Parameters and Creep Characteristics of Asphalt Mixture
刘海权, 纪 伦, 张 磊, 李 俊, 贺文栋
交通技术 Vol.7 No.2, March 21 2018, PDF, HTML, XML DOI:10.12677/OJTT.2018.72009 被引量