近爆炸性自回归序列中参数估计量的渐近性质Asymptotic Properties for the Parameter Estimator in the Near-Explosive Autoregressive Process
于明明, 孟 娇
理论数学 Vol.4 No.6, November 26 2014, PDF, HTML, XML DOI:10.12677/PM.2014.46038 被引量
循环气压缩机启机故障分析及处理措施 Start up Failure Analysis and Treatment Measure of Circulating Air Compressor
殷志宝, 王军平, 张 伟
化学工程与技术 Vol.6 No.6, November 9 2016, PDF, HTML, XML DOI:10.12677/HJCET.2016.66017 被引量
热终轧工艺对Al-4.8Mg合金组织性能的影响 The Influence of Microstructure and Properties of Al-4.8Mg Alloy after Hot Final Rolling Process
戴青松, 罗 任, 苏 新, 兰阳春, 曹柳絮 科研立项经费支持
材料科学 Vol.13 No.7, July 25 2023, PDF, HTML, XML DOI:10.12677/MS.2023.137069 被引量
织物射流冲击干燥下温度变化数值模拟Numerical Simulation of Temperature Change of Fabric under Jet Impingement Drying
李 俊, 钱 淼, 马成章 科研立项经费支持
建模与仿真 Vol.12 No.1, January 29 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121031 被引量
潼关小秦岭金矿绳索取芯钻进技术问题分析Analysis on Technical Problems of Wire-Line Core Drilling in Xiaoqinling Gold Mine of Tongguan
蔡迎千, 陈 龙, 冯 涛, 杨 升, 林 彬, 李金锋
矿山工程 Vol.13 No.3, May 14 2025, PDF, , XML DOI:10.12677/me.2025.133057 被引量
基于阻抗控制和工艺优化的机器人磨抛技术研究Research on Robot Polishing Technology Based on Impedance Control and Process Optimization
张跃飞, 吕显云, 毋宇超, 吴 杰, 郭淼现 国家自然科学基金支持
建模与仿真 Vol.12 No.3, May 31 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123293 被引量
臭氧–气浮分离在水处理中应用研究进展Application of Ozone Oxidation and Flotation Separation in Wastewater Treatment
陈双福, 康得军 科研立项经费支持
环境保护前沿 Vol.3 No.3, July 29 2013, PDF, , DOI:10.12677/AEP.2013.33013 被引量
基于CAE的盖板压铸工艺设计及优化Cover Plate Die-Casting Process Design and Optimization Based on CAE
刘 军, 沈玉康, 刘 洋, 高 凯
建模与仿真 Vol.13 No.2, March 8 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.132097 被引量
激光清洗技术对巴片与极柱焊接质量的影响研究 Impact Research of Laser Cleaning Technology on the Welding Quality of Busbar and Pole
何志强, 陈健豪, 孟燕菲, 邓礼兵
材料科学 Vol.13 No.9, September 20 2023, PDF, HTML, XML DOI:10.12677/MS.2023.139090 被引量
3D打印数字建造技术研究与应用Research and Application of Digital Construction Technology Based on 3D Printing
左自波, 黄玉林, 吴小建 科研立项经费支持
土木工程 Vol.7 No.6, November 7 2018, PDF, HTML, XML DOI:10.12677/HJCE.2018.76092 被引量