基本情况

李云平，博士后，中国中南大学材料与工程学院教授。


研究领域

  1. 无镍生物钴合金的基础研究及开发
  2. 固液界面反应控制及相关新型合金开发
  3. 新型钴镍基超合金强化机理表征及开发
  4. 金属电子束熔炼(EBM)3D打印技术开发


教育背景

2004年4月至2007年3月 博士，东京大学材料工学 (日本文部省全额资助) Professor ManabuEnoki

2000年9月至2003年9月 博士，中南大学材料学

1997年9月至2000年2月 硕士，中南大学材料学

1993年9月至1997年6月 学士，中南大学粉末冶金研究院　工学学士


工作经历

2014年12月至今    教授，中南大学材料科学与工程学院

2009年4月至2014年11月 助理教授，日本东北大学金属材料研究所

2007年11月至2009年3月 博士后研究员，日本东北大学金属材料研究所

2007年4月至2007年10月 外国人特别研究员，日本东京大学大学院工学系研究科

2003年10月至2007年3月 博士研究生，日本东京大学大学院工学系研究科


荣誉奖励

  1. 本间奖励金 (30万日元)，日本本间奖励金协会，2014年5月
  2. Yan Chen, Yunping Li, Akihiko Chiba, Best Poster Award, ISTA (International Society for Technology in Arthroplasty) Congress 2012, 2012.10.5.2011年3月, (指导老师)
  3. 第11回日本金属学会青年发表者论文奖（第59回论文奖，指导老师）
  4. NingTang, Yunping Li, Akihiko Chiba, Best Poster Award, “KINKEN-WAKATE 2009” (指导老师)
  5. 第8回日本金属学会青年发表者论文奖 (第56回论文奖)，2008年3月
  6. 日本文部省全额奖学金，2003年10月-2007年3月


专著

  1. Springer Series in Biomaterials Science and Engineering, Springer, Chapter 3, 排名第1, 月30页(A4)
  2. 生物及产业用钴合金研究最前沿（日），国家大型项目研究公开著作，LIAISON出版社，2012年，约1.5万/10万字，排名第6
  3. 地域创新研究成果集（日），国家创新战略支援项目研究公开著作，LIAISON出版社，2013年，14篇/39篇，无排名
  4. 都市领域产学研成果集（日），国家大型项目研究公开著作，LIAISON 出版社，2011年，18页/200页，无排名
  5. 都市领域产学研促进事业成果集（日），国家大型项目研究公开著作，LIAISON出版社，2010年，8篇/31篇，无排名
  6. 金属注射成形原理与应用，中南大学出版社，2004年，100页/277页，排名第2


论文发表

  1. Yujie Cui, Yunping Li*, HuakangBian, Liyang Lin,Zhongchang Wang, Yuichiro Koizumi, Akihiko Chiba, Impact of solute elements on detwinning in magnesium and its alloys, International Journal of Plasticity, 2015, in press(IF=5.57)
  2. HuakangBian, XiandongXu, Yunping Li*, Yuichiro Koizumi, Zhongchang Wang, Mingwei Chen, Kenta Yamanaka, Akihiko Chiba, “Regulating the γ’ growth in superalloys”, NPG Asia Materials, 7(2015);e212.(Nature子刊; IF=10.18) http://dx.doi.org/10.1038/am?.2015.96
  3. Fenglin Wang, Yunping Li*, XiandongXu, Yuichiro Koizumi, Kenta Yamanaka, HuakangBian, Akihiko Chiba, “Superthermostability of NanoscaleTiC-reinforced Copper Alloys Manufactured by a Two-step Ball-milling Process”, Philosophical Magazine, 2015, in press (IF=1.852) http://dx.doi.org/10.1080/14786435.2015.1112442
  4. Fenglin Wang, Yunping Li, XiaoyuWang, Yuichiro Koizumi, Kenta Yamanaka, Akihiko Chiba, “In-situ Fabrication and Characterization of Ultrafine StructuredCu-TiC Composites with High Strength and High Conductivity by MechanicalMilling”, Journal of Alloy and Compounds, 657(2016) 122-132 (IF=3.0) http://dx.doi.org/10.1016/j.jallcom.2015.10.061
  5. YuhangHou, Yunping Li*, Chen Zhang, Akihiko Chiba,"Influence of Mo addition on Corrosion Resistance of Co-modified Ni-Cr-Mo alloys after cold working", CorrosSci, 99(2015) 185-193. (IF=4.42) http://dx.doi.org/10.1016/j.corsci.2015.07.004
  6. PhacharaphonTunthawiroon, Yunping Li*, Akihiko Chiba, “Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air”, CorrosSci, 100(2015) 428-434. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2015.08.014
  7. Yan Chen,Yunping Li*, Shingo Kurosu,Ning Tang, Yuichiro Koizumi, Akihiko Chiba, “Analysis of In-vitro Wear Behavior and Contact Mechanisms of Metal-on-Metal Hip Joint Bearings with Different Radial Clearances”, Mater Trans, 56(2015), 826-834. (重要期刊IF=0.48) http://dx.doi.org/10.2320/matertrans.M2014440
  8. Yunping Li*, XiandongXu, Chen Zhang, YuhangHou,Akihiko Chiba,"Regulating the Passive Film of NiCoCrMo Alloy in Hydrofluoric Acid Solution by Small Addition of Cu", CorrosSci,98(2015) 119-127. (权威期刊IF=4.42) http://doi:10.1016/j.corsci.2015.05.024
  9. Daixiu Wei, Yuichiro Koizumi, Akinori Yamanaka, Masahiko Yoshino, Hiroaki Nishiyama, Yunping Li, Akihiko Chiba,Controlof γ lamellae precipitation in Ti-39 at.% Al single crystals by nanogrooving process, ActaMater, 96(2015), 352-365.(权威期刊IF=4.46) http://doi: 10.1016/j.actamat.2015.05.016
  10. Yuankuai Cao, FanpeiZeng, Jingzhong Lu, Bin Liu, Yong Liu, Yunping Li, In Situ Synthesis of TiB/Ti6Al4V composites reinforced with Nano TiB through SPS, Mater Trans, 56(2015) 259-263. (重要期刊IF=0.48) http://doi:10.2320/matertrans.M2014347
  11. PhacharaphonTunthawiroon, Yunping Li*, Ning Tang, Akihiko Chiba, “Effects of Si Addition on Corrosion Behavior of Co-29Cr-6Mo alloy for SOFC Operation at Intermediate Temperatures”, CorrosSci, 95(2015), 88-99. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2015.02.036
  12. Yujie Cui, Yunping Li*, Shihai Sun, HuakangBian, Hua Huang, Zhongchang Wang, Yuichiro Koizumi, Akihiko Chiba, “Enhanced Damping Capacity of MagnesiumAlloys by Tensile Twin Boundary”, Scripta Mater, 108(2015) 8-11. (权威期刊IF=3.22)http://dx.doi.org/10.1016/j.scriptamat.2015.01.002
  13. Daixiu Wei, Yuichiro Koizumi,HuakangBian, Yunping Li, Akihiko Chiba,“Nano-lamellar/nano-tubular hierarchical porous structure produced by selective dissolution and anodization of lamellar Ti-40 at.% Al alloy”, Mater Letter, 145(2015), 15-18.(重要期刊IF=2.49) http://dx.doi.org/10.1016/j.matlet.2014.11.059
  14. Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Hiroaki Matsumoto, Yunping Li, Akihiko Chiba, “Phase and grain size inhomogeneity and their influences on creep behavior of Co-Cr-Mo alloy additive manufactured by electron-beam melting (EBM)”ActaMater, 86(2015) 305-318.(权威期刊IF=4.46)http://dx.doi.org/10.1016/j.actamat.2014.11.012
  15. YuhangHou, Yunping Li*, Chen Zhang, Akihiko Chiba,"Ex-situ Observation on the Dissolution Behavior of Ni-16Cr-15Mo and Ni-30Co-16Cr-15Mo Alloys in Aqueous Hydrofluoric Acid Solution", CorrosSci,90(2015), 133-139.(权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2014.10.003
  16. Takuya Mitsunobu, Yuichiro Koizumi, Byoung-Soo Lee,Kenta Yamanaka, Hiroaki Matsumoto,Yunping Li, Akihiko Chiba,"Role of strain-induced martensitic transformation in the formation of extrusion and intrusion during fatigue deformation of biomedical Co-Cr-Mo-N alloys", ActaMater, 81(2014) 377-385. (权威期刊IF=4.46) http://dx.doi.org/10.1016/j.actamat.2014.08.039
  17. YuhangHou, Yunping Li*, Chen Zhang, Yuichiro Koizumi, Akihiko Chiba,"Influence of Cold Working on Corrosion resistance of NiCrMo and NiCoCrMo Alloys", CorrosSci,89(2014), 258-267. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2014.09.004
  18. Fenglin Wang, Yunping Li*, KimoWakon, Akihiko Chiba, “Influence of two-step-ball-milling condition on electrical and mechanical properties of TiC nanoparticle-strengthened Cu alloys”, Mater Design, 64(2014)441-449. (权威期刊IF=3.50) http://dx.doi.org/10.1016/j.matdes.2014.08.027
  19. Chen Zhang, Yunping Li*, YuhangHou, Yuichiro Koizumi, Akihiko Chiba,"Influence of Fe and Cu Addition on Corrosion resistance of NiCrMo and NiCoCrMo Alloys", CorrosSci, 89(2014), 81-92. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2014.08.010
  20. Yan Chen,Yunping Li*, Shingo Kurosu,Kenta Yamanaka, Ning Tang, Akihiko Chiba, “Effects of microstructures on the sliding behavior of hot-pressed CoCrMo alloys", Wear, 319 (2014), 200-210. (权威期刊IF=1.91) http://dx.doi.org/10.1016/j.wear.2014.07.022
  21. Ning Tang, Yunping Li*, PhacharaphonTunthawiroon, Yuichiro Koizumi, Akihiko Chiba,“Thermo-mechanical fatigue test of a wrought Co-based alloy as potential tooling material for die casting”, Mater SciEng A, 615(2014) 164-168.(IF=2.57) http://dx.doi.org/10.1016/j.msea.2014.07.073
  22. Hiroaki Matsumoto, Masami Kitamura,Yunping Li, Yuichiro Koizumi, Akihiko Chiba, “Hot forging characteristic of Ti-5Al-5V-5Mo-3Cr alloy with single metastable microstructure”Mater SciEng A, 611 (2014) 337-344.(IF=2.57) http://dx.doi.org/10.1016/j.msea.2014.06.006
  23. Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Yunping Li, Akihiko Chiba, “Effect of phase transformation on tensile behavior of Co–Cr–Mo fabricated by electron–beam melting”, Journal of the Japanese Society of powder and Powder Metallurgy, 61(2014) 234-242. http://dx.doi.org/10.2497/jjspm.61.234
  24. Fenglin Wang, Yunping Li*, Yuichiro Koizumi, Akihiko Chiba, “Cu-Ti-C Alloy with High Strength and High Electrical Conductivity Prepared by Multiple Ball-milling Processes”, Mater Design, 61(2014) 70-74.(IF=3.50) http://dx.doi.org/10.1016/j.matdes.2014.04.034
  25. Yunping Li, Yujie Cui, HuakangBian, Fenling Wang, Ning Tang, Yan Chen, Bin Liu, Yuichiro Koizumi, Akihiko Chiba, "Twining Activity in Mg Alloy Enriched with a Large Number of Twinning Boundaries", STAM, 15(2014) 035003. (权威期刊IF=3.51) http://dx.doi.org/10.1088/1468-6996/15/3/035003
  26. Yunping Li, PhacharaphonTunthawiroon, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,“Effects of Al, Ti and Zr doping on Oxide Film of Co-29Cr-6Mo Alloy Used as Al Die-casting Molds” CorrosSci, 84(2014), 147-158. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2014.03.020
  27. Yunping Li, Peng Li, HuakangBian, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, "Hot Forging Behaviour and its Effects on Oxidation Behavior of W-Cr alloy", CorrosSci, 83(2014), 367–374. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2014.03.005
  28. Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba,"Effect of Nitridation Treatment on Corrosion behavior of Co–Cr–Mo alloy in liquid Al", CorrosSci, 78(2014), 244-250. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2013.10.01
  29. Xiaoqing Zhang, Yunping Li*, Ning Tang, Emi Onodera, Akihiko Chiba, “Corrosion behavior of CoCrMo alloys in 2 wt% sulfuric acid solution”, Electrochimica Acta, 125(2014), 543-555. (权威期刊IF=4.50) http://dx.doi.org/10.1016/j.electacta.2014.01.143
  30. Yunping Li, Xiuru Fan, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,"Effects of Partially Substituting Cobalt for Nickel on the Corrosion Resistance of a Ni-Cr-Mo Alloy to Aqueous Hydrofluoric Acid", CorrosSci,78(2014), 101-110. (权威期刊IF=4.42) http://dx.doi.org/10.1016/j.corsci.2013.09.004
  31. Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, “Build-direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron-beam melting (EBM)”ActaMater, 64(2014), 154-168. (权威期刊IF=4.46) http://dx.doi.org/10.1016/j.corsci.2013.10.0042
  32. Hiroaki Matsumoto, Yuichiro Koizumi, Tetsuya Ohashi, Byong-Soo Lee, Yunping Li, Akihiko Chiba, “Microscopic mechanism of plastic deformation in a polycrystalline Co-Cr-Mo alloy with a single hcp phase”Acta Mater, 64(2014), 1-11. (权威期刊IF=4.46) http://dx.doi.org/10.1016/j.actamat.2013.11.005
  33. Yunping Li, Teppei Suzuki, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, "Microstructure Evolution of SUS303 Free-cutting Steel during Hot Compression Process", Mater SciEngA, 583(2014), 161–168.(IF=2.57) http://dx.doi.org/10.1016/j.msea.2013.06.069
  34. Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, "Surface nitriding of a Co–Cr–Mo alloy in nitrogen", MaterChemPhys, 145(2014), 350-356.(IF=2.26) http://dx.doi.org/10.1016/j.matchemphys.2014.02.023
  35. Yan Chen,Yunping Li*, Shingo Kurosu,Ning Tang,Yuichiro Koizumi, Akihiko Chiba, “Effects of phase constitution and carbide morphology on wear behavior of high-carbon biomedical CoCrMo alloys under lubricated conditions", Wear, 310(2014), 51-62. (权威期刊IF=1.91) http://dx.doi.org/10.1016/j.wear.2013.12.010