机械工程与技术  >> Vol. 4 No. 1 (March 2015)

基于“新常态”战略的汽车塑料工程绿塑创新驱动的分析研究
Analysis and Research of Green Plastic Engineering Innovation Drive Based on the Strategy of the “New Normal” of Automobile Plastic Engineering

DOI: 10.12677/MET.2015.41004, PDF, HTML, XML, 下载: 2,410  浏览: 7,227 

作者: 张友根:宁波海达塑料机械有限公司,浙江 宁波

关键词: 汽车新常态绿塑创新驱动分析研究Automobile New Normal Green Plastic Engineering Innovation Drive Analysis and Research

摘要: 绿塑创新驱动全面深化“新常态”汽车塑料工程的“健康安全化、生态环保化、轻型节能化、美观个性化”的科学战略。汽车绿塑创新驱动实施于汽车塑料工程技术全套解决方案的各个环节。提出了基于新常态战略的汽车塑料工程绿塑创新驱动的科学技术体系,研究了“新常态”全套解决方案各个环节的绿塑创新驱动及展望,指出基于新常态战略的绿塑创新驱动是“以塑代钢”“旧常态”走向“以塑胜钢”“新常态”,实现塑料应用于汽车领域的历史性跨越及汽车低碳排放的革命。
Abstract: Green plastic engineering innovation drive comprehensively deepens the scientific strategy of the “New Normal” of automobile plastic engineering, including “health and safety, ecological environ-mental protection, light energy conservation, beauty and personalization”. Green plastic engi-neering innovation drive of automobile was implemented in each link of the full set of solution of automobile plastic engineering technology. The science and technology system of green plastic engineering innovation drive based on the strategy of the “New Normal” of automobile plastic en-gineering was put forward. Each link of the full set of solution in the strategy of the “New Normal” and the development of it were researched. It was indicated that green plastic engineering innova-tion drive based on the strategy of the “New Normal” refers to the “Old Normal” with plastic instead of steel moving towards the “New Normal” with plastic over steel, to realize the historic leap in the field of plastics used in automobiles and the automobile revolution of low carbon emissions.

文章引用: 张友根. 基于“新常态”战略的汽车塑料工程绿塑创新驱动的分析研究[J]. 机械工程与技术, 2015, 4(1): 28-71. http://dx.doi.org/10.12677/MET.2015.41004

参考文献

[1] 张友根. 汽车塑料件成型新技术. 第二届全国高分子材料科学与技术学术研讨会论文集, 133-139.
[2] 李雅明 (2010) 全生物降解聚乳酸(PLA)吹膜基础研究. 塑料制造, 7, 49-51.
[3] 杨德存, 周赞斌, 王英 (2014) 热塑性弹性体(TPE)及其市场和产品研发. 中国科技纵横, 11, 83-83.
[4] 姜润喜 (2007) 长纤维增强热塑性复合材料的开发与应用. 合成技术及应用, 1, 24-28.
[5] 吴新明, 齐暑华, 贺捷, 等 (2009) 长玻纤增强注塑聚醚醚酮复合材料加工工艺与力学性能的研究. 航空材料学报, 6, 98-101.
[6] 李一军 (2012) 浅谈碳纤维复合材料成型工艺技术. 广东科技, 21, 202.
[7] 倪朝晖, 张军, 苏广均 (2012) 碳纤维/聚丙烯复合材料的注塑成型及性能研究. 广东化工, 17, 27.
[8] 吴新明, 齐暑华, 贺捷, 等 (2009) 长玻纤增强注塑聚醚醚酮复合材料加工工艺与力学性能的研究. 航空材料学报, 6, 98-101.
[9] 肖九梅 (2014) 废旧塑料包装改性共混再生节能减碳新主张. 塑料包装, 6, 31-34.
[10] 徐佳, 孙超明 (2009) 树脂基复合材料废弃物的回收利用技术. 玻璃钢/复合材料, 4, 100-103.
[11] 张洪申, 赵清华, 陈铭 (2011) 报废汽车典型塑料零部件回收利用技术现状. 制造技术与材料, 2, 13-15.
[12] 刘洁, 刘丽芳, 俞建勇 (2011) 碳纤维复合材料废弃物的回收利用形势. 产业用纺织品, 6, 26-27.