MET  >> Vol. 5 No. 1 (March 2016)

    油井管特殊螺纹接头的密封性能对比分析
    Analysis and Comparison of Sealing Performance of the Premium Connections

  • 全文下载: PDF(770KB) HTML   XML   PP.31-37   DOI: 10.12677/MET.2016.51005  
  • 下载量: 1,114  浏览量: 2,338  

作者:  

彭 羽:天津商业大学,生物技术与食品科学学院,天津;
李连进:天津商业大学,机械工程学院,天津

关键词:
特殊螺纹接头密封性能有限元分析数值模拟接触压力Premium Connection Sealing Performance Finite Element Analysis Numerical Simulation Contact Pressure

摘要:

随着油田的钻井深度增加和海上油田的开发,特殊螺纹接头的需求量增加,油井管制造企业加大了对专用油井管的研究投入。为得出不同密封结构接头密封性能受结构参数的影响,本文以锥面/锥面、柱面/球面两种密封结构的特殊螺纹接头为研究对象,采用有限元软件进行模拟分析,在不同工况下台肩及主密封面的加工误差、球面曲率半径、锥度变化等对两种结构的密封面接触压力及分布规律的影响。有限元计算结果表明:两种密封结构接头的扭矩台肩接触压力受影响较为敏感,而主密封面的接触应力受影响相对较小;在只有上扣工况时,采用锥面/锥面的密封结构接头较为适用,而在存在拉伸工况时,柱面/ 球面结构的密封结构更为适用。

With the drilling depth getting deeper and the exploitation of offshore oilfield, the demands of premium connection are greatly increased, which draw domestic enterprises’ more attention to their sealing performance. Selecting two kinds of premium connections with sealing structure of cone/cone type and cylindrical/spherical type as the research objects, this paper analyzes the in-fluence of structure parameters, which include the interference of the primary sealing structure along with the shoulder structure, and the radius of curvature along with the taper of the primary sealing structure, on contact pressure of sealing structure and shoulder under different conditions. FEA results indicate that the contact pressure of shoulder is sensitive to the structure parameters, while a contrary trend is observed in primary sealing structure. The premium connection with sealing structure of cone/cone type is applicable under the condition of make-up. On the other hand, the cylindrical/spherical type structure is suitable under tensile.

文章引用:
彭羽, 李连进. 油井管特殊螺纹接头的密封性能对比分析[J]. 机械工程与技术, 2016, 5(1): 31-37. http://dx.doi.org/10.12677/MET.2016.51005

参考文献

[1] 张占国, 方文, 孙灵丽, 等. 油套管特殊螺纹接头的技术现状及结构形式[J]. 石油机械, 2011, 39(10): 179-182.
[2] 李连进, 彭羽, 李牧. 石油套管特殊螺纹接头密封结构设计方法[J]. 润滑与密封, 2015, 40(4): 106-109.
[3] 朴龙华, 张毅. 我国特殊螺纹接头油套管生产使用现状及需要注意的几个问题[J]. 钢管, 2006, 35(4): 45-48.
[4] 王建东, 冯耀, 荣林凯, 等. 特殊螺纹接头密封结构比对分析[J]. 中国石油大学学报(自然科学版), 2010, 34(5): 126-130.
[5] 许志倩, 闰相祯, 杨秀娟, 等. 微观泄漏机理在非API套管接头密封性能评估中的应用[J]. 石油学报, 2014, 35(5): 963-971.
[6] 高连新, 金烨, 张居勤. 石油套管特殊螺纹接头的密封设计[J]. 机械工程学报, 2005, 41(3): 216-220.
[7] 于洋. 特殊螺纹接头选用技术研究[D]: [硕士学位论文]. 西安: 西安石油大学, 2012: 5-10.
[8] 辛纪元, 吴广瀚, 邹天下, 等. 特殊螺纹接头密封性能与结构分析[J]. 石油矿场机械, 2015, 44(6): 29-33.
[9] 周晓君, 魏波. 基于ANSYS的特殊螺纹接头结构设计与分析[J]. 机电工程, 2012, 29(9): 1002-1006.
[10] API SPEC 5B (2008) Specification for Threading, Gauging and Thread Inspection of Casing, Tubing and Line Pipe Thread. 15th Edition.