[1]
|
Katayama, S. and Kawahito, Y. (2009) Elucidation of Phenomena in High Power Fiber Laser Welding, and Development of Prevention Procedures of Welding Defects. Proceedings of SPIE, 146, 124-126.
|
[2]
|
Kaplan, A.F.H., Westin, E.M., Wiklund, G., et al. (2008) Imaging in Cooperation with Modeling of Selected Defect Mechanisms during Fiber Laser Welding of Stainless Steel. International Congress on Applications of Lasers & Electro-optics, 73, 1861-1875.
|
[3]
|
陈根余, 周宇, 张明军, 等. 万瓦级光纤激光厚板焊接表面塌陷的试验研究[J]. 中国机械工程, 2014(25): 1-5.
|
[4]
|
Golubev, V.S. (2000) Possible Hydrodynamic Phenomena in Deep-Penetration Laser Channels. Proceedings of SPIE, 3888, 244-253. https://doi.org/10.1117/12.377026
|
[5]
|
Golubev, V.S. (2003) Laser Welding and Cutting: Recent Insights into Fluid-Dynamics Mechanisms. Proceedings of SPIE, 5121, 1-15. https://doi.org/10.1117/12.513762
|
[6]
|
Kumar, N., Dash, S., Tyagi, A.K., et al. (2007) Hydrodynamical Phe-nomena in the Process of Laser Welding and Cutting. Science and Technology of Welding and Joining, 12, 540-548. https://doi.org/10.1179/174329307X213701
|
[7]
|
Arata, Y., Abe, N. and Oda, T. (1985) Fundamental Phenomena in High Power CO2 Laser Welding (Report I). Transactions of JWRI, 14, 5-11.
|
[8]
|
Arata, Y., Abe, N. and Oda, T. (1985) Fundamental Phenomena in High Power CO2 Laser Welding (Report II). Transactions of JWRI, 14, 17-22.
|
[9]
|
Matsunawa, A., Kim, J.D., Seto, N., et al. (1998) Dynamics of Keyhole and Molten Pool in Laser Welding. Journal of Laser Applications, 10, 247-254. https://doi.org/10.2351/1.521858
|
[10]
|
Matsunawa, A., Seto, N., Kim, J.D., et al. (2000) Dynamics of Keyhole and Molten Pool in High-Power CO2 Laser Welding. Proceedings of SPIE, 3888, 34-45. https://doi.org/10.1117/12.377006
|
[11]
|
Matsunawa, A., Mizutani, M., Katayama, S., et al. (2003) Porosity Formation Mechanism and Its Prevention in Laser Welding. Welding International, 17, 431-437. https://doi.org/10.1533/wint.2003.3138
|
[12]
|
Kawahito, Y., Mizutani, M. and Katayama, S. (2007) Elucidation of High-Power Fibre Laser Welding Phenomena of Stainless Steel and Effect of Factors on Weld Geometry. Journal of Physics D: Applied Physics, 40, 5854-5859.
https://doi.org/10.1088/0022-3727/40/19/009
|
[13]
|
Kawahito, Y., Mizutani, M. and Katayama, S. (2009) High Quality Welding of Stainless Steel with 10 kW High Power Fibre Laser. Science and Technology of Welding and Joining, 14, 288-294.
https://doi.org/10.1179/136217108X372531
|
[14]
|
Katayama, S., Abe, Y., Mizutani, M., et al. (2011) Deep Penetration Welding with High-Power Laser Under Vacuum. Transactions of JWRI, 40, 15-19.
|
[15]
|
Kawahito, Y., Oiwa, S., Mizutani, M., et al. (2011) Effects of Laser-Induced Plume in High-Power Fiber Laser Welding with Long-Focal-Distance Focusing Optics. Quarterly Journal of the Japan Welding Society, 29, 18-23.
https://doi.org/10.2207/qjjws.29.18
|
[16]
|
Kawahito, Y., Matsumoto, N., Mizutani, M., et al. (2008) Characterisation of Plasma Induced during High Power Fibre Laser Welding of Stainless Steel. Science and Technology of Welding and Joining, 13, 744-748.
https://doi.org/10.1179/136217108X329313
|
[17]
|
Kawahito, Y., Kinoshita, K., Matsumoto, N., et al. (2008) Effect of Weakly Ionised Plasma on Penetration of Stainless Steel Weld Produced with Ultra High Power Density Fibre Laser. Science and Technology of Welding and Joining, 13, 749-753. https://doi.org/10.1179/136217108X356971
|
[18]
|
Katayama, S. (2012) Recent Progress in Laser Welding Technology. Journal of the Vacuum Society of Japan, 55, 471-480. https://doi.org/10.3131/jvsj2.55.471
|
[19]
|
Berger, P., Hgel, H. and Graf, T. (2011) Understanding Pore Formation in Laser Beam Welding. Physics Procedia, 12, 241-247. https://doi.org/10.1016/j.phpro.2011.03.031
|
[20]
|
Shin, M. and Nakata, K. (2010) Weld Bead Formation by a 10kW Class High Power Fiber Laser on 16 mm Thickness Carbon Steel Plate. Transactions of JWRI, 39, 33-38.
|
[21]
|
Tsukamoto, S. (2011) High Speed Imaging Technique Part 2-High Speed Imaging of Power Beam Welding Phenomena. Science and Technology of Welding and Joining, 16, 44-55. https://doi.org/10.1179/136217110X12785889549949
|
[22]
|
Mitkevich, E.A., Lopota, V.A. and Gornyi, S.G. (1982) Dynamics of Seam Formation at Welding by CO2 Laser. Avtomaticheskaya Svarka, 2, 22-26.
|
[23]
|
金湘中. 激光深溶焊接小孔效应的理论和试验研究[D]: [博士学位论文]. 长沙: 湖南大学, 2002.
|
[24]
|
张屹. 基于“三明治”新方法的激光深熔焊接小孔效应的模拟研究[D]: [博士学位论文]. 长沙: 湖南大学, 2005.
|
[25]
|
金湘中, 李力钧. 激光深熔焊接过程中小孔效应的试验研究[J]. 应用激光, 1999, 19(5): 293-295.
|
[26]
|
金湘中, 张屹, 李力钧. 激光深熔焊接小孔效应的理论和试验研究[J]. 应用激光, 2002, 22(2): 193-198.
|
[27]
|
Jin, X., Li, L. and Zhang, Y. (2002) A Study on Fresnel Absorption and Reflections in the Keyhole in Deep Penetration Laser Welding. Journal of Physics D: Applied Physics, 35, 2304-2310. https://doi.org/10.1088/0022-3727/35/18/312
|
[28]
|
Zhang, Y., Chen, G., Wei, H., et al. (2008) A Novel “Sandwich” Method for Observation of the Keyhole in Deep Penetration Laser Welding. Optics and Lasers in Engineering, 46, 133-139.
https://doi.org/10.1016/j.optlaseng.2007.08.010
|
[29]
|
李时春. 万瓦级激光深熔焊接中金属蒸气与熔池耦合行为研究[D]: [博士学位论文]. 长沙: 湖南大学, 2014.
|
[30]
|
Zhang, M., Chen, G., Zhou, Y., et al. (2013) Direct Observation of Keyhole Characteristics in Deep Penetration Laser Welding with a 10 kW Fiber Laser. Optics Express, 21, 19997-20004. https://doi.org/10.1364/OE.21.019997
|
[31]
|
张明军. 万瓦级光纤激光深熔焊接厚板金属蒸汽行为与缺陷控制[D]: [博士学位论文]. 长沙: 湖南大学, 2013.
|
[32]
|
李时春, 许伟, 廖生慧, 等. 高功率激光深熔焊接孔内气流与孔壁的耦合行为研究[J]. 应用物理, 2017, 7(11): 304-312.
|
[33]
|
Ilar, T., Eriksson, I., Powell, J., et al. (2012) Root Humping in Laser Welding—An Investigation Based on High Speed Imaging. Physics Procedia, 39, 27-32. https://doi.org/10.1016/j.phpro.2012.10.010
|
[34]
|
Kaplan, A.F.H. and Wiklund, G. (2009) Advanced Welding Analysis Methods Applied to Heavy Section Welding with a 15 kW Fibre Laser. Welding in the World, 53, 295-300.
|
[35]
|
Zhang, M., Chen, G., Zhou, Y., et al. (2013) Observation of Spatter Formation Mechanisms in High-Power Fiber Laser Welding of Thick Plate. Applied Surface Science, 280, 868-875. https://doi.org/10.1016/j.apsusc.2013.05.081
|
[36]
|
Fabbro, R., Hamadou, M. and Coste, F. (2004) Metallic Vapor Ejection Effect on Melt Pool Dynamics in Deep Penetration Laser Welding. Journal of Laser Applications, 16, 16-19. https://doi.org/10.2351/1.1642633
|
[37]
|
Fabbro, R., Slimani, S., Doudet, I., et al. (2006) Experimental Study of the Dynamical Coupling between the Induced Vapour Plume and the Melt Pool for Nd-Yag CW Laser Welding. Journal of Physics D: Applied Physics, 39, 394-400.
https://doi.org/10.1088/0022-3727/39/2/023
|
[38]
|
Fabbro, R. (2010) Melt Pool and Keyhole Behaviour Analysis for Deep Penetration Laser Welding. Journal of Physics D: Applied Physics, 43, Article ID: 445501.
|
[39]
|
Kaplan, A. (1994) A Mode of Deep Penetration Laser Welding Based on Calculation of Keyhole Profile. Journal of Physics D: Applied Physics, 27, 1805-1814. https://doi.org/10.1088/0022-3727/27/9/002
|
[40]
|
Fabbro, R. and Chouf, K. (2000) Keyhole Modelling during Laser Welding. Journal of Applied Physics, 87, 4075-4083.
https://doi.org/10.1063/1.373033
|
[41]
|
Klein, T., Vicanek, M., Kroos, J., et al. (1994) Oscillations of the Keyhole in Penetration Laser beam Welding. Journal of Physics D: Applied Physics, 27, 2023-2030. https://doi.org/10.1088/0022-3727/27/10/006
|
[42]
|
Postacioglu, N., Kapadia, P. and Dowden, J. (1991) A Theoretical Model of Themocapillary Flows in Laser Welding. Journal of Physics D: Applied Physics, 24, 15-20. https://doi.org/10.1088/0022-3727/24/1/004
|
[43]
|
Mizutani, M., Katayama, S. and Matsunawa, A. (2004) X-Ray Observation of Keyhole Instability in Zinc Molten Pool and Estimation of Recoil Pressure in Laser Welding. PICALO, Melbourne, 23-28.
|
[44]
|
Mizutani, M., Katayama, S. and Matsunawa, A. (2002) Observation of Molten Metal Behavior during Laser Irradiation-Basic Experiment to Understand Laser Welding Phenomena. Proceedings of SPIE (Osaka, Japan), 208-213.
|
[45]
|
Mizutani, M. and Katayama, S. (2003) Keyhole Behavior and Pressure Distribution during Laser Irradiation on Molten Metal. Proceedings ICALEO, Jacksonville.
|
[46]
|
Kou, S. and Wang, Y.H. (1986) Weld Pool Convection and Its Effect. Welding Journal, 65, 63-70.
|
[47]
|
Ye, X.H. and Chen, X. (2002) Three Dimensional Modeling of Heat Transfer and Fluid Flow in Laser Full Penetration Welding. Journal of Physics D: Applied Physics, 35, 1049-1056. https://doi.org/10.1088/0022-3727/35/10/313
|
[48]
|
杜汉斌. 钛合金激光焊接及其流动场数值模拟[D]: [博士学位论文]. 武汉: 华中科技大学, 2003.
|
[49]
|
Du, H., Hu, L., Liu, J., et al. (2004) A Study on Metal Flow in Full Penetration Laser Welding for Titanium Alloy. Computational Material Science, 29, 419-427. https://doi.org/10.1016/j.commatsci.2003.11.002
|
[50]
|
Wang, H., Shi, Y. and Gong, S. (2006) Numerical Simulation of Laser Keyhole Welding Processes Based on Control Volume Methods. Journal of Physics D: Applied Physics, 39, 4722-4730. https://doi.org/10.1088/0022-3727/39/21/032
|
[51]
|
王宏. 激光深熔焊过程的流体动力学研究[D]: [博士学位论文]. 北京: 北京工业大学, 2007.
|
[52]
|
Semak, V. and Matsunawa, A. (1997) The Role of Recoil Pressure in Energy Balance during Laser Materials Processing. Journal of Physics D: Applied Physics, 30, 2541-2552. https://doi.org/10.1088/0022-3727/30/18/008
|
[53]
|
Amara, E.H. and Bendib, A. (2002) Modelling of Vapour Flow in Deep Penetration Laser Welding. Journal of Physics D: Applied Physics, 35, 272-280. https://doi.org/10.1088/0022-3727/35/3/317
|
[54]
|
Amara, E.H., Fabbro, R. and Bendib, A. (2003) Modeling of the Compressible Vapor Flow Induced in a Keyhole during Laser Welding. Journal of Applied Physics, 93, 4289-4296. https://doi.org/10.1063/1.1557778
|
[55]
|
Amara, E.H., Fabbro, R. and Hamadi, F. (2006) Modeling of the Melted Bath Movement Induced by the Vapor Flow in Deep Penetration Laser Welding. Journal of Laser Applications, 18, 2-11. https://doi.org/10.2351/1.2164483
|
[56]
|
Dowden, J. (2008) The Theory of Laser Material Processing. Springer, Berlin, 95-128.
|
[57]
|
Lee, J.Y., Sung, H.K., Farson, D.F., et al. (2002) Mechanism of Keyhole Formation and Stability in Stationary Laser Welding. Journal of Physics D: Applied Physics, 35, 1570-1576. https://doi.org/10.1088/0022-3727/35/13/320
|
[58]
|
Ki, H., Mohanty, P.S. and Mazumder, J. (2002) Modeling of Laser Keyhole Welding: Part I Mathematical Modeling, Numerical Methodology, Role of Recoil Pressure, Multiple Reflections, and Free Surface Evolution. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 33, 1817-1830.
https://doi.org/10.1007/s11661-002-0190-6
|
[59]
|
Ki, H., Mohanty, P.S. and Mazumder, J. (2002) Modeling of Laser Keyhole Welding: Part II Simulation of Keyhole Evolution, Velocity, Temperature Profile, and Experimental Verification. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 33, 1831-1842. https://doi.org/10.1007/s11661-002-0191-5
|
[60]
|
Dasgupta, A.K., Mazumder, J. and Li, P. (2007) Physic of Zinc Vaporization and Plasma Absorption during CO2 Laser Welding. Journal of Applied Physics, 102, Article ID: 053108. https://doi.org/10.1063/1.2777132
|
[61]
|
Geiger, M., Leitz, K.H., Koch, H., et al. (2009) A 3D Transient Model of Keyhole and Melt Pool Dynamics in Laser Beam Welding Applied to the Joining of Zinc Coated Sheets. Production Engineering—Research and Development, 3, 127-136. https://doi.org/10.1007/s11740-008-0148-7
|
[62]
|
Otto, A., Koch, H., Leitz, K.H., et al. (2011) Numerical Simulations—A Versatile Approach for Better Understanding Dynamics in Laser Material Processing. Physics Procedia, 12, 11-20. https://doi.org/10.1016/j.phpro.2011.03.003
|
[63]
|
Pang, S., Chen, L., Zhou, J., et al. (2011) A Three-Dimensional Sharp Interface Model for Self-Consistent Keyhole and Weld Pool Dynamics in Deep Penetration Laser Welding. Journal of Physics D: Applied Physics, 44, Article ID: 025301. https://doi.org/10.1088/0022-3727/44/2/025301
|
[64]
|
庞盛永. 激光深熔焊接瞬态小孔和运动熔池行为及相关机理研究[D]: [博士学位论文]. 武汉: 华中科技大学, 2011.
|
[65]
|
Zhang, L., Zhang, J., Zhang, G., et al. (2011) An Investigation on the Effects of Side Assisting Gas Flow and Metallic Vapour Jet on the Stability of Keyhole and Molten Pool during Laser Full-Penetration Welding. Journal of Physics D: Applied Physics, 44, Article ID: 135201. https://doi.org/10.1088/0022-3727/44/13/135201
|
[66]
|
Zhao, H., Niu, W., Zhang, B., et al. (2011) Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling during Deep-Penetration Laser Welding. Journal of Physics D: Applied Physics, 44, Article ID: 485302. https://doi.org/10.1088/0022-3727/44/48/485302
|
[67]
|
Cho, W.I., Na, S.J., Cho, M.H., et al. (2010) Numerical Study of Alloying Element Distribution in CO2 Laser-GMA Hybrid Welding. Computational Materials Science, 49, 792-800. https://doi.org/10.1016/j.commatsci.2010.06.025
|
[68]
|
Cho, W.I., Na, S.J., Thomy, C., et al. (2012) Numerical Simulation of Molten Pool Dynamics in High Power Disk Laser Welding. Journal of Materials Processing Technology, 212, 262-275.
https://doi.org/10.1016/j.jmatprotec.2011.09.011
|