极小模原理的一类三阶全对称张量不等式应用
Application of the Minimal Normal Tensors to a Class of Third-Order Fully Symmetric Tensor Inequalities
DOI: 10.12677/PM.2024.142064, PDF, HTML, XML, 下载: 31  浏览: 150 
作者: 段德园*, 龚一帆:云南师范大学数学学院,云南 昆明
关键词: 极小模原理子流形Blaschke张量共形形式Minimal Norm Tensors Submanifolds Blaschke Tensors Conformal Form
摘要: 本文研究了共形形式Φ消失的三阶全对称张量Ai,j,k的极小模张量,我们利用极小模的非负性证明了不等式
Abstract: In this paper, we study the minimal norm tensors of the third order full symmetry tensors Ai,j,k, with vanishes from the conformal form Φ. We prove the inequality by using the non-negativity of the minimal norm.
文章引用:段德园, 龚一帆. 极小模原理的一类三阶全对称张量不等式应用[J]. 理论数学, 2024, 14(2): 649-654. https://doi.org/10.12677/PM.2024.142064

1. 引言

张量在微分几何的研究中起着非常重要的作用。对张量的trace-free分解就是研究之一。J. T. Alexander在 [1] 中研究了张量分解存在的条件,H. Weyl在 [2] 中利用trace-free分解得到了正交群的表示理论。D. Krupka在 [3] [4] [5] [6] [7] 中对张量的trace-free分解做了很多研究,得到了(2,2)型和(1,3)型Riemann曲率张量的trace-free分解。J. Mikes,M. jukl,L. Juklová,L. Lakomá在 [8] [9] [10] [11] 中推广了D. Krupka的一些结果,应用在近复结构空间和一些特殊的微分算子。V. T. Toth,S. G. Turyshev在 [12] 中计算了三阶协变张量的trace-free张量和部分高阶trace-free的全对称协变张量。最近,郭震提出了极小模张量的研究,管山林和郭震合作在 [13] 中得到了三阶和四阶张量的极小模张量。

Blaschke张量A是单位球面中子流形的Möbius微分几何的一个基本不变量。王长平在 [14] 中利用光锥模型,引入了4个基本的Möbius不变量,即:Möbius度量g,Möbius第二基本形式B,Blaschke张量A和Möbius形式Φ。此后,Möbius子流形几何得到了许多研究,其中包含了Möbius形式消失的超曲面分类 [15] ,Möbius迷向子流形的分类 [16] ,具有常Möbius截面曲率的超曲面的分类 [17] 以及对Blaschke张量线性依赖于Möbius度量和Möbius第二基本形式超曲面的分类 [18] 。钟定兴和肖卫玲等人在 [19] 中研究了具有两个互异Blaschke特征值的超曲面与Blaschke等参超曲面的关系。李兴校和宋虹儒在 [20] 中对单位球面中具有3个不同Blaschke特征值的Blaschke平行子流形进行了完全的分类。郭震和李虹在 [21] 中得到了一般Riemann空间中子流形的四个共形不变量及其可积条件,并推导出外围空间有常截面曲率时的可积条件。Möbius形式消失和Blaschke平行子流形的分类都得到了研究,因此非常自然地想到研究一般Riemann空间中共形形式消失时Blaschke张量的不等式。本文从极小模张量出发,利用 [13] 三阶协变张量的极小模张量的一般公式,得到了三阶协变张量 A i j , k 在共形形式Φ消失时极小模表达式。因此,利用极小模的非负性,我们得到了以下定理:

定理1设n维黎曼流形M等距浸入到 n + p 维具有常截面曲率c的黎曼流形 N ( c ) 。若共形形式Φ消失,则Blaschke张量A满足

| A | 2 3 4 ( n 1 ) 2 ( n + 2 ) | R |

其中R是关于度量 g (见(2.8))的纯量曲率。

2. 预备知识

设n维黎曼流形M等距浸入到 n + p 维度量为g的黎曼流形 N ( c ) ,c为N的截面曲率。我们选择局部正交基 e 1 , , e n + p ,使得 e 1 , , e n 切于M, e n + 1 , , e n + p 法于M。我们使用的指标范围如下:

1 A , B , C , n + p 1 i , j , k , n n + 1 α , β , γ , n + p .

我们约定重复的指标在各自取值范围内求和。设 ω 1 , , ω n + p e 1 , , e n + p 的对偶标架场。于是,我们可以写出N的结构方程

d ω A B = ω B ω B A , ω A B + ω B A = 0 , (2.1)

d ω A B ω A C ω C B = 1 2 K A B C D ω C ω D , (2.2)

其中 ω A B K A B C D 分别是由N的度量g诱导的联络分量和曲率分量。限制在M上,我们有

ω α = 0 , (2.3)

ω j ω j α = 0 , (2.4)

d ω i j ω i k ω k j = 1 2 K i j k l ω k ω l . (2.5)

由(2.4),利用Cartan引理有

ω i α = h i j α ω j h i j α = h j i α . (2.6)

我们定义1-形式 θ i θ i α

θ i = ρ ω i θ i α = ω i α H α ω i (2.7)

其中 ρ 2 = n n 1 i , j , α ( h i j α H α δ i j ) 2 H α = i h i i α

于是,我们可以定义

g = i ( θ i ) 2 = ρ 2 g , (2.8)

B = ρ 1 θ i α θ i e α = B i j α θ i θ j ρ 1 e α , (2.9)

其中

B i j α = ρ 1 ( h i j α H α δ i j ) . (2.10)

我们称 A = A i j θ i θ j 为子流形M的Blaschke张量, Φ = ρ 1 C i α θ i e α 为M的共形形式,其中

A i j = ρ 2 [ ( log ρ ) i , j ( log ρ ) i ( log ρ ) j H α h i j α + 1 2 ( log ρ 2 + H 2 c ) δ i j ] (2.11)

C i α = ρ 2 [ H , i α + ( h i l α H α δ i l ) ( log ρ ) ] , (2.12)

其中 ( , ) i , j 分别表示关于g的梯度算子和二阶协变导数。

推论2.1 [14] 设 M n 是有常截面曲率c的黎曼流形 N n + p ( c ) 的黎曼子流形,则我们有

R i j k l = B i k α B j l α B i l α B j k α + A i k δ j l + A j l δ i k A i l δ j k A j k δ i l , (2.13)

R α β i j = B i k α B k j β B i k β B k j α , (2.14)

B i j , k α B i k , j α = δ i j C k α δ i k C j α , (2.15)

C i , j α C j , i α = B i k α A k j B j k α A k i , (2.16)

A i j , k A i k , j = B i k α C j α B i j α C k α . (2.17)

其中 R i j k l R α β i j 分别是关于度量 g 的曲率张量分量和法曲率分量。

在(2.16)中令 j = l 求和,我们有

R i k = B i j α B j k α + ( n 2 ) A i k + t r ( A ) δ i k , (2.18)

在(2.18)中令 i = k 求和,有

R = i , k , α ( B i k α ) 2 + 2 ( n 1 ) t r ( A ) , (2.19)

注意到

i , j , α ( B i j α ) 2 = n 1 n , (2.20)

于是,我们有

t r ( A ) = 1 2 ( n 1 ) ( R n 1 n ) , (2.21)

下面我们定义极小模。

定义1设V是n维向量,T为定义在V上的三阶全对称张量。若对于任意 x ,三阶张量 F ( x ) 满足如下关系

F i j k ( x ) = T i j k + x ( T i δ j k + T j δ i k + T k δ i j ) , (2.22)

其中 T i j k F i j k ( x ) 分别表示张量T和 F ( x ) 的分量, T i = j = k = 1 T i j k .

定义2若对于任意的 x ,函数 f ( x ) 满足

f ( x ) = F ( x ) 2 = i , j , k F i j k 2 ( x ) , (2.23)

则称 f ( x ) F ( x ) 的模函数。

定义3若存在 x 0 ,使得

f ( x 0 ) = min x f ( x ) , (2.24)

则称 F ( x 0 ) 是T的极小模张量。

3. 定理1的证明

由(2.22)和(2.23),我们有

f ( x ) = i , j , k F i j k 2 = i , j , k T i j k 2 + 3 [ ( n + 2 ) x 2 + 2 x ] i T i 2 , (3.1)

从(3.1)可以看出 f ( x ) x 有极小值。

T i = 0 时, F 2 = i , j , k T i j k 2 。当 T i 0 时, d f d x = 6 [ ( n + 2 ) x + 1 ] i T i 2 ,令 d f d x = 0 ,我们得到 ( n + 2 ) x + 1 = 0 ,即 x = 1 n + 2 f ( x ) 的唯一的极小值点。于是,极小模为

F 2 = i , j , k T i j k 2 3 n + 2 i T i 2 . (3.2)

Φ = 0 ,由(2.17)我们有 A i j , k = A i k , j ,即三阶张量 A i j , k 是全对称的。我们令 T i j k = A i j , k T i = j A i j , j = j A j j , i = [ t r ( A ) ] i 。通过(2.21),我们有

[ t r ( A ) ] , i = [ 1 2 ( n 1 ) ( R + n 1 n ) ] , i = 1 2 ( n 1 ) R , i . (3.3)

带入(3.2),我们有

F 2 = i , j , k A i j , k 2 3 4 ( n 1 ) 2 ( n + 2 ) i R , i 2 ,

由极小模的非负性,即: F 2 0 。于是,我们有

i , j , k A i j , k 2 3 4 ( n 1 ) 2 ( n + 2 ) i R , i 2 0

A 2 3 4 ( n 1 ) 2 ( n + 2 ) R 2 .

这就完成了定理的证明。

本文优点

在 [13] 中给出了极小模原理,但其应用很少。本文给出了一类三阶全对称张量的一个应用,证明了一般Riemann空间中共形形式消失时Blaschke张量的一个不等式估计。

展望

由于本文用极小模原理只证明了一般Riemann空间中共形形式消失时Blaschke张量的不等式,没有给出不等式成立的条件。

参考文献

[1] Cheng, Q.M. and Ishikawa, S. (1999) A Characterization of the Clifford Torus. Proceedings of the American Mathe-matical Society, 127, 819-828.
https://doi.org/10.1090/S0002-9939-99-05088-1
[2] Alexander, J.W. (1926) On the Decomposition of Tensors. Annals of Mathematics, 27, 421-423.
https://doi.org/10.2307/1967693
[3] Krupka, D. (1995) The Trace Decomposition Problem. Beitragezur Algebra und Geometrie, 36, 303-316.
[4] Krupka, D. (2017) Decompositions of Covariant Tensor Spaces. Lepage Research Institute Library, 3, 1-20.
[5] Krupka, D. (2003) The Weyl Tensors. Publicationes Mathematicae Debrecen, 62, 447-460.
https://doi.org/10.5486/PMD.2003.2884
[6] Krupka, D. (1995) The Trace Decomposition Problem. Beitragezur Algebra und Geometrie, 36, 303-316.
[7] Krupka, D. (1996) The Trace Decomposition of Tensors of Type (1,2) and (1,3). In: Tamássy, L. and Szenthe, J., Eds., New Developments in Differential Geometry, Springer, Dordrecht, 243-253.
https://doi.org/10.1007/978-94-009-0149-0_19
[8] Mikes, J., Jukl, M. and Juklová, L. (2011) Some Results on Traceless Decomposition of Tensors. Journal of Mathematical Sciences, 174, 627-640.
https://doi.org/10.1007/s10958-011-0321-y
[9] Mikes, J. (1996) On the General Trace Decomposition Problem. Proceedings of Conference, 28 August-1 September 1995, 45-50.
[10] Jukl, M. and Juklová, L. (2013) On Decompo-sition Problems on Manifolds with a Special Differential Operators. Miskolc Mathematical Notes, 14, 591-599.
https://doi.org/10.18514/MMN.2013.920
[11] Lakomá, L. and Jukl, M. (2004) The Decomposition of Tensor Spaces with Almost Complex Structure. In: Slovák, J. and Čadek, M., Eds., Proceedings of the 23rd Winter School “Geometry and Physics”, Circolo Matematico di Palermo, Palermo, 145-150.
[12] Toth, V.T. and Turyshev, S.G. (2022) Efficient Trace-Free Decomposition of Symmetric Tensors of Arbitrary Rank. International Journal of Geometric Methods in Modern Physics, 19, Article ID: 2250201.
https://doi.org/10.1142/S0219887822502012
[13] Guo, Z. and Guan, S.L. (2021) Minimal Norm Tensors Principle and its Applications. arXiv preprint arXiv:2112.01222.
[14] Wang, C. (1998) Moebius Geometry of submanifolds in Sn. manuscripta mathematica, 96, 517-534.
https://Doi.Org/10.1007/S002290050080
[15] Li, H.Z. and Wang, C.P. (2003) Surfaces with Vanishing Möbius form in Sn. Acta Mathematica Sinica, 19, 671-678.
https://doi.org/10.1007/s10114-003-0309-8
[16] Liu, H., Wang, C. and Zhao, G. (2001) Möbius Isotropic Submanifolds in Sn. Tohoku Mathematical Journal, 53, 553-569.
https://doi.org/10.2748/tmj/1113247800
[17] Guom Z., Lim, T., Linm, L., et al. (2011) Classification of Hypersurfaces with Constant Möbius Curvature in Sm+1. Mathematische Zeitschrift, 271, 193-219.
https://doi.org/10.1007/s00209-011-0860-4
[18] Li, H. and Wang, C. (2003) Möbius Geometry of Hypersurfaces with Constant Mean Curvature and Scalar Curvature. manuscripta mathematica, 112, 1-13.
https://doi.org/10.1007/s00229-003-0383-3
[19] 钟定兴, 肖卫玲, 张和颜. 上具有两个Blaschke特征值的超曲面[J]. 赣南师范大学学报, 2017, 38(6): 37-42.
[20] 李兴校, 宋虹儒. 单位球面中具有3个不同Blaschke特征值的Blaschke平行子流形[J]. 数学年刊A辑(中文版), 2018, 39(3): 249-272.
[21] Guo, Z. and Li, H. (2018) Conformal Invariants of Submanifolds in a Riemannian Space and Conformal Rigidity Theorems on Willmore Hypersurfaces. The Journal of Geometric Analysis, 28, 2670-2691.
https://doi.org/10.1007/s12220-017-9928-7