基于低功耗蓝牙技术的电缆接头全尺度温度监测装置的设计
Design of Full-Size Temperature Monitoring Device of Cable Joint Based on Low-Power Bluetooth Technology
DOI: 10.12677/IaE.2019.72013, PDF,    科研立项经费支持
作者: 刘 恒, 杨 帆, 方亚林, 李晋贤, 房占凯：重庆大学电气工程学院，输配电装备及系统安全与新技术国家重点实验室，重庆；余 鹏, 卢 旭：深圳供电局有限公司，广东 深圳
关键词: 电缆接头；低功耗蓝牙；全尺度；立体测量；Cable Joint； Low-Power Bluetooth； Full Size； Three-Dimensional Monitoring
摘要: 三芯配电电缆接头是配网供电系统中的薄弱一环，温度是反应电缆接头运行状态的重要指标。本文基于低功耗蓝牙技术，利用单片机集成度高、运行可靠的优势，设计了一种电缆接头全尺度温度测量装置。本文首先介绍了监测装置的硬件框架设计，其次分析了各硬件的特点及选型，最后将该装置进行了实验及现场验证分析。通过该装置对三芯配电电缆接头的温度进行立体测量，为实时掌握电缆接头的整体温度，电缆接头运行状况的准确分析提供了途径。
Abstract: Three-core distribution cable joint is one of the unsubstantial parts in power supply system of the distribution network, and temperature is an important index to show the operational condition of it. Based on low-power Bluetooth technology, taking advantage of single chip, which is high integration density and high reliability, this paper designs a sort of full-size temperature monitoring device of cable joint. Firstly, the hardware diagram design of the device has been introduced, and then the selection and properties of the hardware parts have been analyzed. Finally, experiments and practical application have been performed to demonstrate the validity of this device. Monitoring the temperature of the three-core distribution cable joint by this device three-dimensionally, it pro-vides an approach to controlling the overall temperature in real time and accurately analyzing operational condition of cable joint.
文章引用：刘恒, 杨帆, 方亚林, 余鹏, 卢旭, 李晋贤, 房占凯. 基于低功耗蓝牙技术的电缆接头全尺度温度监测装置的设计[J]. 仪器与设备, 2019, 7(2): 86-97. https://doi.org/10.12677/IaE.2019.72013

参考文献

[1] 杨帆, 杨旗, 程鹏, 等. 电缆接头内部气隙放电缺陷下的绝缘劣化程度表征方法[J]. 电工技术学报, 2017, 32(2): 24-32.
[2] Gao, Y., Tan, T., Liu, K., et al. (2016) Research on Temperature Retrieval and Fault Diagnosis of Cable Joint. High Voltage Engineering, 20, 7388-7393.
[3] Lin, S. and Hu, W. (2012) Theoretical Research on Temperature Field of Power Cable Joint with FEM. International Conference on System Science & Engineering, Dalian, 30 June-2 July 2012, 564-567. [Google Scholar] [CrossRef] 
[4] 方亚林. 基于温度测量的电缆接头压接缺陷检测方法及应用[D]: [硕士学位论文]. 重庆: 重庆大学, 2018.
[5] 张颖超, 吴嘉伦, 李俊. 基于zigbee电力电缆接头远程温度监测系统研究[J]. 电测与仪表, 2014, 51(16): 103-107, 116.
[6] Olsen, R., Anders, G.J., Holboell, J., et al. (2013) Modelling of Dynamic Transmission Cable Temperature Considering Soil-Specific Heat, Thermal Resistivity, and Precipitation. IEEE Transactions on Power Delivery, 28, 1909-1917. [Google Scholar] [CrossRef] 
[7] Zhou, Y. and Yang, J.L. (2009) Online Temperature Moni-toring System for High Voltage Power Cable Based on Distributed Optical Fiber Temperature Sensors. High Voltage Appa-ratus.
[8] Miswan, N., Halim, H.S.A. and Hizam, H. (2009) Thermal Performance of Ferrule Designs for Medium Voltage Cable Jointing. IEEE International Conference on Properties & Applications of Dielectric Materials, Harbin, 19-23 July 2009, 122-125. [Google Scholar] [CrossRef] 
[9] Nasrollahpour, M., Sreekumar, R., Hajilou, F., et al. (2018) Low-Power Bluetooth Receiver Front End Design with Oscillator Leakage Reduction Technique. Journal of Low Power Electronics, 14, 179-184. [Google Scholar] [CrossRef] 
[10] 张晓飞, 吕中虎, 韩永温, 等. 基于ADT7420的多点温度采集系统设计[J]. 电子世界, 2015(19): 173-175.
[11] 冯仰刚, 谢乾坤, 强立宏, 等. TM32F103ZET6最小系统设计[J]. 电子世界, 2013(5): 141-142.
[12] 程鹏. 电缆接头内部缺陷下的电磁-热-力特性及表征方法研究[D]: [博士学位论文]. 重庆: 重庆大学, 2016.

为你推荐