车用尿素水溶液中不溶物问题研究
Study on Insoluble Matter in Automobile Urea Aqueous Solution
摘要: 本文对车用尿素水溶液中不溶物产生的原因进行了分析,又对GB 29518-2013《柴油发动机氮氧化物还原剂 尿素水溶液(AUS 32)》附录E不溶物含量检测方法中仪器和设备、样品准备、测量3部分进行检测参数优化,使不溶物含量检测结果的重复性更好。
Abstract: In this paper, the causes of insoluble matter in vehicle urea aqueous solution were analyzed, and the detection parameters of instrument and equipment, sample preparation and measurement in Appendix E of GB 29518-2013 “Diesel engine NOx reduction agent—Aqueous urea solution (AUS 32)” in the insoluble matter content detection method were optimized. The repeatability of insoluble content detection results is better.
参考文献
|
[1]
|
郑金凤, 滕江波, 连露, 等. 快检技术在车用尿素水溶液质量监管中的应用及发展前景[J]. 中国标准化, 2021(4): 130-134.
|
|
[2]
|
中国国家标准化管理委员. GB 29518-2013 柴油发动机氮氧化物还原剂 尿素水溶液(AUS 32) [S]. 北京: 中国标准出版社, 2013.
|
|
[3]
|
王攀, 李红明, 陈鹏姣, 等. 车用尿素溶液杂质问题研究总结[J]. 山东化工, 2020, 49(17): 128-129.
|