热镀(铝)锌板表面钝化现状与紫外光固化技术应用趋势的分析
Current Status of Surface Passivation in Hot-Dip Aluminum-Zinc Steel Plate and Analysis on the Application Trend of UV-Curable Technology
DOI: 10.12677/HJCET.2021.115039, PDF,   
作者: 陆伟星：安徽工业大学分子工程与应用化学研究所，安徽 马鞍山；上海梅山钢铁股份有限公司技术中心，江苏 南京；伍林玲, 马春雨, 张千峰*：安徽工业大学分子工程与应用化学研究所，安徽 马鞍山
关键词: 热镀(铝)锌板；表面钝化；紫外光固化；可行性分析；工艺技术；Hot-Dip Aluminum-Zinc Steel Plate； Surface Passivation； UV-Curable； Feasibility Analysis； Process Technology
摘要: 随着人们生活水平的不断提高，对环保的要求也越来越严格，热镀(铝)锌板因用传统方法热镀处理后处理液气味异常、环境污染严重，并且对人体危害大，因而其使用将受到严格的限制。而紫外光固化涂料作为一种环保涂料，近年来受到了涂料行业的广泛关注，本文通过对热镀(铝)锌版表面钝化现状的简要介绍和对紫外光固化技术的可行性分析，发现紫外光固化涂料具有固化速度快、固化程度高、室温固化、无溶剂配方等优点，能够在现有工艺系统中得到广泛使用。
Abstract: With the continuous improvement of people’s living, the requirement standards for environmental protection are becoming more and more stringent. Due to the abnormal smell of the treatment solution after the traditional hot plating treatment, serious environmental pollution, and great harm to the human body, the use of hot-dip aluminum-zinc steel plate will be strictly restricted. As an environmentally friendly coating, UV-curable coatings have received extensive attention of the coating industries in recent years. Through a brief introduction to the current status of the surface passivation in hot-dip aluminum-zinc steel plate and analysis on the application tread of UV-curable technology, we have found that UV-curable coatings have the advantages of fast curing speed, high curing degree, room-temperature curing, solvent-free formulation. As a result, it can be widely used in the existing process system.
文章引用：陆伟星, 伍林玲, 马春雨, 张千峰. 热镀(铝)锌板表面钝化现状与紫外光固化技术应用趋势的分析[J]. 化学工程与技术, 2021, 11(5): 294-304. https://doi.org/10.12677/HJCET.2021.115039

参考文献

[1] 胡华东, 李洪翠, 高广洲, 查凯, 张磊, 王乐. 高端家电用热镀锌耐指纹钢板产品开发[J]. 钢铁钒钛, 2019, 40(2): 161-165.
[2] 张林阳, 郑虹, 陈兵华, 宋庆军, 陈学罡, 彭其飞, 邵亮, 吕岩, 丁奇. 汽车热镀锌钢板激光搭接焊与电阻点焊接头拉剪性能对比研究[J]. 汽车工艺与材料, 2020(2): 13-17.
[3] 李晓峰. 家电用无铬耐指纹热镀锌钢板性能检测及优化[C]//中国金属学会. 2014年全国轧钢生产技术会议文集(上). 中国金属学会, 2014: 280-284.
[4] 谢英秀, 金鑫焱, 王利. 宝钢热镀锌钢板的开发与展望[J]. 宝钢技术, 2017(1): 1-6+11.
[5] 刘李斌, 康永林, 宋仁伯, 蒋光锐, 商婷, 滕华湘. 1000MPa级超高强度热镀锌钢板耐腐蚀性能[J]. 腐蚀与防护, 2019, 40(10): 723-730.
[6] 杨洪刚, 吕家舜, 徐闻慧, 李锋, 武婷玉, 姜效军. 镀锌板的腐蚀变色机理分析[J]. 材料保护, 2019, 52(11): 13-16.
[7] 马源, 杨家云, 戴毅刚. 高耐蚀型热镀铝锌钢板冲压后表面特性及耐蚀性研究[J]. 宝钢技术, 2016(2): 9-12+16.
[8] 李晓东, 汤晓东, 汪亚楠, 赵云龙, 张千峰. 热镀锌钢板无铬自润滑钝化膜的成膜机理及性能[J]. 材料保护, 2016, 49(4): 4-6+32.
[9] 蔡明. 马钢建筑用热镀铝锌有铬耐指纹彩涂板的试验研究[J]. 安徽冶金, 2013(3): 5-7+57.
[10] 杨兴亮, 汤晓东, 汪亚楠, 赵云龙, 张千峰. 自润滑及高导电型无铬耐指纹复合转化膜的制备与性能[J]. 材料保护, 2016, 49(3): 47-51.
[11] Zhang, X., Sloof, W.G., Hovestad, A., van Westing, E.P.M., Terryn, H. and de Wit, J.H.W. (2005) Characterization of Chromate Conversion Coatings on Zinc Us-ing XPS and SKPFM. Surface and Coatings Technology, 197, 168-176. [Google Scholar] [CrossRef] 
[12] Almeida, E., Fedrizzi, L. and Diamantinio, T.C. (1998) Oxi-dising Alternative Species to Chromium VI in Zinc-Galvanised Steel Surface Treatment. Part 2—An Electrochemical Study. Surface and Coatings Technology, 105, 97-101. [Google Scholar] [CrossRef] 
[13] 田丰, 赵婧, 邱龙时, 潘晓龙. 镀锌钢板钼酸盐钝化膜防腐蚀性能研究[J]. 世界有色金属, 2019(15): 134-136.
[14] Jaén, J.A., Araúz, E.Y., Iglesias, J. and Delgado, Y. (2003) Reactivity of Tannic Acid with Common Corrosion Products and Its Influence on the Hydrolysis of Iron in Alka-line Solutions. Hyperfine Interactions, 148, 199-209. [Google Scholar] [CrossRef] 
[15] Wilcox, G.D. and Wharton, J.A. (1997) A Review of Chromatefree Passivation Treatments for Zinc and Zinc Alloys. Transactions of the Institute of Metal Finishing, 75, B140-B142.
[16] Zhu, D. and van Ooij, W.J. (2004) Corrosion Protection of Metals by Water-Based Silane Mixtures of Bis-[Trime- thoxysilylpropyl] Amine and Vinyltriacetoxysilane. Progress in Organic Coatings, 49, 42-53. [Google Scholar] [CrossRef] 
[17] 许哲峰. 自润滑型无铬钝化涂层成膜机制及润滑性能研究[D]: [硕士学位论文]. 昆明: 昆明理工大学, 2016.
[18] van Ooij, W.J. and Zhu, D. (2001) Electrochemical Impedance Spectroscopy of Bis-[Triethoxysilypropyl]-Tetrasulfide on Al 2024-T3 Substrates. CORROSION, 57, 413-427. [Google Scholar] [CrossRef] 
[19] Tu, J., Zhao, Q., Wei, L. and Yang, Q. (2012) Heavy Metal Concentration and Speciation of Seven Representative Municipal Sludges from Wastewater Treatment Plants in Northeast China. Envi-ronmental Monitoring and Assessment: An International Journal, 184, 1645-1655. [Google Scholar] [CrossRef] [PubMed]
[20] 胡海祥. 重金属废水治理技术概况及发展方向[J]. 中国资源综合利用, 2008, 26(2): 22-25.
[21] Zeiner, M., Rezic, T. and Santek, B. (2010) Monitoring of Cu, Fe, Ni, and Zn in Wastewater during Treatment in a Horizontal Rotating Tubular Bioreactor. Water Environment Research, 82, 183-186. [Google Scholar] [CrossRef] 
[22] 倪维良, 虞嘉, 王李军, 王留方, 朱亚君, 张睿. 玻璃涂料的发展现状及研究进展[J]. 涂料技术与文摘, 2017. 38(5): 50-54.
[23] 袁腾, 商武, 王邦清, 等. 塑料用聚酯型聚氨酯丙烯酸酯光固化涂料性能研究及配方优化设计[J]. 涂料工业, 2014, 44(3): 54-59.
[24] Kunst, S.R., Beltrami, L.V.R., Cardoso, H.R.P., Menezes, T.L. and de Fraga Malfatti, C. (2014) UV Curing Paint on Hybrid Films Modified with Plasticizer Diisodecyl Adipate Applied on Tinplate: The Effects of Curing Temperature and the Double Layer. In-dustrial & Engineering Chemistry Research, 53, 19216-19227. [Google Scholar] [CrossRef] 
[25] Lutz, A., Otto, V.D.B., Van Damme, J., Verheyen, K., Bauters, E., De Graeve, I., et al. (2015) A Shape-Recovery Polymer Coating for the Corrosion Protection of Metallic Surfaces. ACS Ap-plied Materials & Interfaces, 7, 175-183. [Google Scholar] [CrossRef] [PubMed]
[26] Senani, S., Campazzi, E., Villatte, M. and Druez, C. (2013) Potentiality of UV-Cured Hybrid Sol-Gel Coatings for Aeronautical Metallic Substrate Protection. Surface and Coatings Technology, 227, 32-37. [Google Scholar] [CrossRef] 
[27] 王滕, 柴立涛, 李伟刚. 镀铝板用耐高温型无铬钝化结合机理及性能[J]. 中国冶金, 2019, 29(12): 45-50+68.
[28] Posner, R., Sundell, P.E., Bergman, T., Roose, P., Grundmeier, G., Heylen, M., et al. (2018) UV-Curable Polyester Acrylate Coatings: Barrier Properties and Ion Transport Kinetics along Polymer/Metal Interfaces. Journal of the Electrochemical Society, 158, C185-C193.
[29] Malucelli, G., Gianni, A.D., Deflorian, F., Fedel, M. and Bongiovanni, R. (2009) Preparation of Ultraviolet-Cured Nanocomposite Coatings for Protecting against Corrosion of Metal Substrates. Corrosion Science, 51, 1762-1771. [Google Scholar] [CrossRef] 
[30] 沈会杰, 张磊, 黎厚斌. 热——光双重固化涂层对金属表面附着的影响[J]. 广东化工, 2015, 42(2): 63-64.
[31] 王少峰, 范云鹰, 雷玉娟. 无铬钝化机理研究及发展现状[J]. 材料保护, 2019, 52(8): 138-143+181.
[32] 庄祥英. 浅谈紫外光固化涂层[J]. 广东化工, 1994(4): 38-40.
[33] 曹楚南. 电化学阻抗谱导论[M]. 北京: 科学出版社, 2002.
[34] 刘倞, 胡吉明, 张鉴清, 曹楚南. 基于高频电化学阻抗谱测试的涂层防护性能评价方法[J]. 腐蚀科学与防护技术, 2010, 22(4): 325-328.
[35] 胡吉明, 张鉴清, 谢德明, 曹楚南. 环氧树脂涂覆LY12铝合金在NaCl溶液中的阻抗模型[J]. 物理化学学报, 2003, 19(2): 144-149.
[36] Romano, A.P., Olivier, M.G. (2015) Investigation by Electrochemical Impedance Spectroscopy of Fili-form Corrosion of Electrocoated Steel Substrates. Progress in Organic Coatings, 89, 1-7. [Google Scholar] [CrossRef] 
[37] Yuan, X., Yue, Z.F., Liu, Z.Q., Wen, S.F., Li, L. and Feng, T. (2016) Comparison of the Failure Mechanisms of Silicone-Epoxy Hybrid Coatings on Type A3 Mild Steel and 2024 Al-Alloy. Progress in Organic Coatings, 90, 101-113. [Google Scholar] [CrossRef] 
[38] 陈伟, 蒋梅燕, 伍廉奎, 等. 硅烷改性聚合物防护涂层的研究进展[J]. 腐蚀科学与防护技术, 2015, 27(1): 85-89.