标题:
源于TiCl4的Na0.5Bi0.5TiO3粉体水热合成研究The Research on Hydrothermal Synthesis of Na0.5Bi0.5TiO3 Powder from TiCl4
作者:
李霞, 戴金辉, 鲁统雷, 朱志斌, 黄翔, 吴平伟, 李海燕
关键字:
无铅压电陶瓷, TiCl4, Na0.5Bi0.5TiO3, 水热合成, 微观形貌 Piezoelectric Ceramic; TiCl4; Na0.5Bi0.5TiO3; Hydrothermal Synthesis; Morphology
期刊名称:
《Material Sciences》, Vol.2 No.1, 2012-01-19
摘要:
文中通过水热法,分别采用四氯化钛(TiCl4)、五水硝酸铋(Bi(NO3)3•5H2O)作为钛源、铋源,以氢氧化钠(NaOH)作为钠源和矿化剂,成功制备了不同微观形貌的Na0.5Bi0.5TiO3粉体。研究了NaOH浓度、水热温度以及水热时间对NBT粉体微观形貌的影响,结果表明:NaOH浓度是影响NBT粉体微观形貌的主要因素;当NaOH浓度为14 M时,水热温度和水热时间主要影响粉体颗粒结晶程度,对粉体的微观形貌影响不是特别明显。
Different morphologies of Bismuth Sodium Titanate (Na0.5Bi0.5TiO3, abbreviated as NBT) powders have been successfully prepared via a hydrothermal method using titanium tetrachloride (TiCl4), bismuth nitrate (Bi(NO3)3•5H2O), sodium hydroxide (NaOH) as titanium, bismuth, sodium source, respectively, and sodium hydroxide (NaOH) as mineralizing agent, too. The effect of reactive parameters, including NaOH concentration, reaction temperature and reaction time on the powders morphologies, was studied. The results show that: NaOH concentration is the main parameter which affects the morphology of NBT powders, and when the NaOH concentration is 14 M, hydrothermal temperature and hydrothermal time affect more on the crystallinity of NBT powders, and the effect they make on the morphology of NBT powders is not evident.