生物标志物对急性创伤后脓毒血症患者预后判断的研究进展Research Progress of Biomarkers for Prognosis of Patients with Acute Post-Traumatic Sepsis
罗 超, 胡 毅 下载量: 68 浏览量: 122
临床医学进展 Vol.14 No.2, February 29 2024, PDF, HTML, XML DOI:10.12677/ACM.2024.142594 被引量
一类带有饱和发生率和Logistic增长的随机病毒感染模型的灭绝性及平稳分布Extinction and Stationary Distribution of a Classic Stochastic Viral Infection Model with Saturation Rate and Logistic Growth
罗 超, 张晓丹 下载量: 1,503 浏览量: 3,804
应用数学进展 Vol.7 No.5, May 25 2018, PDF, HTML, XML DOI:10.12677/AAM.2018.75072 被引量
中国股票市场有效性研究Research on the Effectiveness of China’s Stock Market
罗超予, 杨启帆 下载量: 613 浏览量: 2,019
金融 Vol.12 No.2, March 25 2022, PDF, HTML, XML DOI:10.12677/FIN.2022.122020 被引量
河南省财政教育支出影响因素研究 Research on the Influencing Factors of Financial Education Expenditure in Henan Province
杨启帆, 罗超予 下载量: 354 浏览量: 900
国际会计前沿 Vol.11 No.2, June 20 2022, PDF, HTML, XML DOI:10.12677/FIA.2022.112011 被引量
后疫情时代封校对某高校在校学生的影响调查研究Investigation and Research on the Influence of Proofreading on Students in a University in the Post-Epidemic Era
董凤芝, 杨启帆, 罗超予 下载量: 440 浏览量: 6,426
统计学与应用 Vol.11 No.3, June 29 2022, PDF, HTML, XML DOI:10.12677/SA.2022.113072 被引量
渐开线弧齿圆柱齿轮副抗偏载特性的研究Anti-Bias Load Capacity Analysis of the Involute Arc Cylindrical Gear
刘祖奇, 宋爱平, 张益汉, 罗 超 下载量: 2,303 浏览量: 6,766
机械工程与技术 Vol.4 No.3, September 23 2015, PDF, , XML DOI:10.12677/MET.2015.43023 被引量
利用预应力原理提升龙门机床横梁的抗弯强度Promoting the Bending Strength of the Beam of Gantry Machine Tool by the Principle of Prestress
罗 超, 宋爱平, 张钦搏, 王树凤, 张海滨 下载量: 2,001 浏览量: 3,215 科研立项经费支持
机械工程与技术 Vol.5 No.2, June 30 2016, PDF, , XML DOI:10.12677/MET.2016.52017 被引量
直齿圆锥齿轮与弧齿圆锥齿轮轮齿应力比较The Comparison of Straight Tooth Bevel Gear and Spiral Bevel Gear about the Stress of Gear Tooth
张钦搏, 宋爱平, 罗超, 张海滨, 王树凤 下载量: 1,772 浏览量: 3,980
仪器与设备 Vol.4 No.2, July 28 2016, PDF, , XML DOI:10.12677/IaE.2016.42002 被引量
复合垂直流人工湿地处理有机磷阻燃剂的研究进展Research Progress of Composite Vertical Flow Artificial Wetland Treatment of Organic Phosphorus Flame Retardants
彭 静, 罗 超, 何文辉, 杨树东, 何旭东, 赵 斌 下载量: 183 浏览量: 321 科研立项经费支持
环境保护前沿 Vol.13 No.2, April 14 2023, PDF, HTML, XML DOI:10.12677/AEP.2023.132037 被引量
基于多目标灰狼算法的H13模具钢铣削工艺优化研究Research on Optimization of H13 Die Steel Milling Process Based on Multi-Objective Grey Wolf Algorithm
卢相林, 江小辉, 汪 龙, 郭淼现, 罗 超, 林志俭 下载量: 268 浏览量: 380 国家自然科学基金支持
运筹与模糊学 Vol.13 No.2, April 24 2023, PDF, HTML, XML DOI:10.12677/ORF.2023.132111 被引量