分析化学论文集
我 1962 年毕业于南开大学化学系分析化学专业。“分析化学”是关于化学物质(原子和分子)存在的学科,它和国家建设密切相关,所以从当初分配到国防企业实验室,直到退休一直在这片天地从事各种材料的检测工作。我的专业和我的岗位,给了我在分析化学领域,不断地发现问题,解决问题的机遇和平台。比如,在光谱分析方面,即面临光谱法可否分析高含量的问题,发表了“高含量光谱分析探讨”,提出了“用不同的分析线对可以测定不同含量”的观点;在化学分析方面,又面临滴定法可否测定紫铜的问题,发表了“紫铜滴定分析与‘尾数微滴’法”;在光度计应用方面,又面临光度法可否测定多种材料的各种含量的问题。于是,从1985 年起到现在,就一直潜心于其原理和方法的研究。从2000 年发表“光度法的精密度与准确度”,直至2024 年发表“吸光度定位光度法测定锰铁中的锰”,共计20 多篇。实现了光度法对多种原材料从0.0%到100%的含量测定。尽管这些观点和方法,没有得到国内权威们的认可(直到现在,他们依然坚守着他们的传统观念),但2020 年,美国国际化出版集团SciencePG 发行的《科学发现》(Science Discovery)第8 卷,第1-2 期,却以笔者的署名,发表了“精密度法则条件下的光度法”。称其“确立了‘两标准光度法’,改变了传统观念,呈现了光度法简便、高速、高效的本色”。表明“科学是无国界的”,真正的科学规律,迟早是会被世人认可的。我坚信“实践是检验真理的标准!”我关于光度法及分析化学的这些新观点、新方法,比如,“紫铜滴定分析与‘尾数微滴’法”、“光度法不确定度的数学模型”、“‘精密度法则’是分析化学的基础技术”、“光度法的五大贡献”、“吸光度定位光度法测定锰铁中的锰”等等,在超越国内同辈权威之后的年轻同行中,必然会有一天得到认可,甚至会得到更大地发扬。它们不只是对于光度法,而是对于整个分析化学领域,都会有很实际地影响。期待着广大后来者去检验、研究、发扬光大!这正是笔者所以要把它们汇编成册,呈现于世的终极目标。
样章
书籍预览文件: 前言
内容:
  • 前言
  • 1. 高含量光谱分析探讨 Exploration of High Content Spectral Analysis
  • 2. 紫铜滴定分析与“尾数微滴”法 Copper Titration Analysis and “Tail Number Micro Droplet” Method
  • 3. 分光光度法的精密度和准确度 Precision and Accuracy of Spectrophotometry
  • 4. 等滴光度法测定钼铁中的钼 Determination of Mo in the Ferromolybdenum by Equal Droplet Spectrophotometry
  • 5. 剩余光度法测定紫铜中的铜 Determination of Copper in Purple Copper by Remaining Quantity Photometry
  • 6. 关于分光光度法的新观点 A New Perspective on Spectrophotometry
  • 7. 增量光度法测定巴氏合金中的杂质铅 Determination of Impurity Lead in Babbitt Alloy by Incremental Photometry
  • 8. 高锰酸分光光度法的研究 Study on the Spectrophotometric Method of Permanganate
  • 9. 光度法应用探讨 Investigation on the Spectrophotometry Application
  • 10. 光度法快速测定不锈钢中的铬、镍、钼、钛、锰 Rapid Determination of Cr, Ni, Mo, Ti, Mn in Stainless Steel by Spectrophotometry
  • 11. 光度法不确定度的数学模型 A mathematical Model for the Uncertainty of Photometry
  • 12. 关于分光光度法的新发现 New Discoveries about Spectrophotometry
  • 13. “精密度法则”在计量检测中的作用 The Role of “Precision Rule” in Metrological Testing
  • 14. 重复测量结果的不确定度评定 Evaluation of Uncertainty in Repeated Measurement Results
  • 15. 关于重复测量不确定度评定方法的商榷 Discussion on the Uncertainty Evaluation Method for Repeated Measurements
  • 16. 两标准光度法测定钢铁中的锰、硅、磷 Two Standard Samples Spectrophotometry for the Determination of Mn, Si, and P in Steel and Iron
  • 17. 对光度法的几点新认识 Several New Understandings on Spectrophotometry
  • 18. “精密度法则”条件下的光度法 Photometry under the Condition of “Precision Rule”
  • 19. “精密度法则”在分光光度法中的作用 The Role of “Precision Rule” in Spectrophotometry
  • 20. 沉淀物的悬浮液光度法测定 Suspension Photometric Determination of Precipitate
  • 21. “精密度法则”是分析化学的基础技术 The “Precision Rule” ?s the Basic Technology of Analytical Chemistry
  • 22. 光度法的五大贡献 The Five Major Contributions of Photometry
  • 23. 吸光度定位光度法测定锰铁中的锰 Determination of Manganese in Ferromanganese by Absorbance Positioning Spectrophotometry
读者人群: 对分析化学感兴趣的学者,科研工作者,教师,学生以及相关业余爱好者。
2 前言
作者: 袁秉鉴
摘要 | (120KB)
8 1. 高含量光谱分析探讨 Exploration of High Content Spectral Analysis
作者: 袁秉鉴
摘要 | (279KB)
16 2. 紫铜滴定分析与“尾数微滴”法 Copper Titration Analysis and “Tail Number Micro Droplet” Method
作者: 袁秉鉴
摘要 | (284KB)
24 3. 分光光度法的精密度和准确度 Precision and Accuracy of Spectrophotometry
作者: 袁秉鉴
摘要 | (468KB)
34 4. 等滴光度法测定钼铁中的钼 Determination of Mo in the Ferromolybdenum by Equal Droplet Spectrophotometry
作者: 袁秉鉴
摘要 | (267KB)
43 5. 剩余光度法测定紫铜中的铜 Determination of Copper in Purple Copper by Remaining Quantity Photometry
作者: 袁秉鉴
摘要 | (316KB)
56 6. 关于分光光度法的新观点 A New Perspective on Spectrophotometry
作者: 袁秉鉴
摘要 | (523KB)
65 7. 增量光度法测定巴氏合金中的杂质铅 Determination of Impurity Lead in Babbitt Alloy by Incremental Photometry
作者: 袁秉鉴
摘要 | (274KB)
75 8. 高锰酸分光光度法的研究 Study on the Spectrophotometric Method of Permanganate
作者: 袁秉鉴
摘要 | (361KB)
88 9. 光度法应用探讨 Investigation on the Spectrophotometry Application
作者: 袁秉鉴
摘要 | (425KB)
98 10. 光度法快速测定不锈钢中的铬、镍、钼、钛、锰 Rapid Determination of Cr, Ni, Mo, Ti, Mn in Stainless Steel by Spectrophotometry
作者: 袁秉鉴
摘要 | (354KB)
106 11. 光度法不确定度的数学模型 A mathematical Model for the Uncertainty of Photometry
作者: 袁秉鉴
摘要 | (338KB)
117 12. 关于分光光度法的新发现 New Discoveries about Spectrophotometry
作者: 袁秉鉴
摘要 | (343KB)
126 13. “精密度法则”在计量检测中的作用 The Role of “Precision Rule” in Metrological Testing
作者: 袁秉鉴
摘要 | (418KB)
133 14. 重复测量结果的不确定度评定 Evaluation of Uncertainty in Repeated Measurement Results
作者: 袁秉鉴
摘要 | (356KB)
143 15. 关于重复测量不确定度评定方法的商榷 Discussion on the Uncertainty Evaluation Method for Repeated Measurements
作者: 袁秉鉴
摘要 | (320KB)
155 16. 两标准光度法测定钢铁中的锰、硅、磷 Two Standard Samples Spectrophotometry for the Determination of Mn, Si, and P in Steel and Iron
作者: 袁秉鉴
摘要 | (391KB)
174 17. 对光度法的几点新认识 Several New Understandings on Spectrophotometry
作者: 袁秉鉴
摘要 | (437KB)
196 18. “精密度法则”条件下的光度法 Photometry under the Condition of “Precision Rule”
作者: 袁秉鉴
摘要 | (525KB)
209 19. “精密度法则”在分光光度法中的作用 The Role of “Precision Rule” in Spectrophotometry
作者: 袁秉鉴
摘要 | (508KB)
229 20. 沉淀物的悬浮液光度法测定 Suspension Photometric Determination of Precipitate
作者: 袁秉鉴
摘要 | (540KB)
251 21. “精密度法则”是分析化学的基础技术 The “Precision Rule” ?s the Basic Technology of Analytical Chemistry
作者: 袁秉鉴
摘要 | (514KB)
273 22. 光度法的五大贡献 The Five Major Contributions of Photometry
作者: 袁秉鉴
摘要 | (579KB)
287 23. 吸光度定位光度法测定锰铁中的锰 Determination of Manganese in Ferromanganese by Absorbance Positioning Spectrophotometry
作者: 袁秉鉴
摘要 | (390KB)

袁秉鉴

男,汉族,中共党员。高级工程师。1937年1月5日生于陕西省西安市。1957年怀着“科学报国”的志向考入南开大学化学系。1962年毕业,主动要求到工厂,因为在下厂劳动中他看到工厂存在着大量研究课题。10月被分配到617厂中央实验室。在苏联专家走后的当时,实验室留下全室价值最昂贵的一整套苏式光谱设备,不能承担工厂原材料的日检工作。1963年,室领导安排他去打开这一僵局。在化学分析室的积极配合下,经过一年多的努力,他以这套设备承担了钢铁原材料中硅、锰、铬、镍、钼、钨、钛、铝、钒等的日检工作。

书籍信息
出版日期:2024-11.15
ISBN:978-1-64997-980-3
(简装书) 价格¥181.00元
ISBN:978-1-64997-981-0
(电子书) 价格¥36.00元
出书/购书请联系: book@hanspub.org