基本情况
曹伟,材料加工工程博士,郑州大学教授,先进成型技术学会会员,兆威机电有限公司“广东省科技特派员”,河南省教育厅学术带头人,计算力学学报特约审稿人。近年来主持完成了国家自然科学基金、河南省重点科技攻关等纵向、横向项目5项,参加国家自然科学基金重大项目、支撑计划、国防973等多项国家重点项目研究与开发,获得了国家科技进步二等奖、河南省科技进步一等奖等多项奖励。发表学术论文论文30余篇,SCI收录18次,EI收录25次,申请发明专利1项,获得软件著作权2项。
研究领域
长塑料成型的研究、开发 中面模型的Z-MOLD软件、实体模型PartMolding软件和微注射成型软件(PM-Micro)的开发
教育背景
2004年 博士,郑州大学
1992年 硕士,清华大学计算数学
1987年 学士,华东师范大学
论文发表
-
Wei Cao, Lingchao Kong, Qian Li, et al.
Model and simulation for melt flow in micro-injection molding based on the PTT
model[J]. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2011,
19(8): 085003-085019
-
Wei Cao, Shufeng Gan, Shubing Ye, et al.
Study on air accumulation and influence on flow balance in micro-injection
molding[J]. Journal of Manufacturing Science and Engineering-Transactions of
the Asme, 2011, 133(1): 011004-1-011004-6
-
S. Zhang, W. Cao, G. Zheng, Z. Jia, C.
Shen. Model and Numerical Simulation for the Second Penetration in
Water-Assisted Injection Molding[J]. International Polymer Processing, 2011, 5:
1-9
-
Cao Wei, Shen Yaqiang; Li Chunqian. Effect
of micro-viscosity and wall slip on polymer melt rheology inside
micro-channel[C]. Boston, Massachusetts, USA: Society of Plastics Engineers,
2011 1534-1539
-
Cao Wei, Gan Shufeng, Li Qian, et al.
Computing Flow-Induced Stresses of Injection Molding Based on PTT Model[C].
Sydney, Australia: Materials Science and Engineering, 2010: 012136-1-012136-10
-
Cao Wei, Shen Changyu, Zhang Chunjie, et
al. Computing flow-induced stresses of injection molding based on the
Phan-Thien-Tanner model[J]. Archive of Applied Mechanics, 2008, 78(5): 363-377
-
Zhiyu Min, Wei Cao, Changyu Shen. Numerical
study of dilute polymer solutions using FENE bead-spring chain model[J].
Polymer-Plastics Technology and Engineering, 2008, 47(6), 630-634
-
Zhiyu Min, Jingbo Chen, Changyu Shen, Wei
Cao. Numerical study of extension rheological properties of polymer solutions
using FENE model[J]. Polymer-Plastics Technology and Engineering, 2008,
47(8):824-827
-
Wei Cao, Chang-Yu Shen, Chun-Jie Zhang and
Li-Xia Wang. Computing flow-induced stresses of injection molding based on the
Phan–Thien–Tanner model[J]. Archive of Applied Mechanics, 2008, 75(5), 363-377
-
Wei Cao, Rui Wang and Changyu Shen.
3D flow simulation for viscous nonisothermal incompressible fluid in injection
molding[J]. Polymer - Plastics Technology and Engineering, 2005, 44(5), 901-917
-
Wei Cao and Changyu Shen. Coupled part and
mold temperature simulation for injection molding based on solid geometry[J].
Polymer-Plastics Technology and Engineering, 2006, 45, 741-749