基本情况

沙建军，大连理工大学教授、博士生导师。

 

研究领域

航空航天领域热防护系统结构和高性能复合材料

 

部分论文

近五年来负责多项纵向研究项目，在国外专业期刊和会议发表学术论文40多篇。多次在专业领域内国际会议上将自己的研究成果进行报告并于同行进行学术交流。完成两本编著。

  1. J. J. Sha, T. Hinoki, A. Kohyama, Microstructure evolution and high-temperature mechanical properties of Hi-NicalonTM Type S fiber annealed and crept under various oxygen partial pressures, Materials Characterization, 2009, 60: 796-802
  2. J. J. Sha, M. Hauscherr, W. Krenkel, The influence of thermal treatment of carbon fibers on the interfacial shear strength during the pyrolysis of CFRP to C/C composites, The proceedings of the 11th International Conference and Exhibition of the European Ceramic Society, 2009, Jun 21-25, Cracow, POLAND
  3. J. J. Sha, M. Hauscherr, W. Krenkel, Fiber/matrix interfacial bonding properties at the CFRP step of C/C-SiC fabrication process, 2009, Aril. 1-4, Germany Ceramic Society conference, Bayreuth, Germany
  4. J. J. Sha, T. Hinoki, A. Kohyama, Thermal and mechanical stabilities of Hi-Nicalon fiber under annealing and creep in various oxygen partial pressures, Corrosion Science, 2008, 50(11): 3132-3138
  5. S. Ochiai, S. Ikeda, S. Iwamoto, J. J. Sha, H. Okuda, Y. Waku, N. Nakagawa, A. Mitani, M. Sato and T. Ishikawa, Residual Stresses in YAG of Melt Growth Al2O3/YAG Eutectic Composite Estimated by Indentation Fracture Test and Finite Element Analysis,Journal of the European Ceramic Society, 2008, 28(12): 2309-2317
  6. J. J. Sha, S. Ochiai, H. Okuda, S. Iwamoto, Y. Waku, N. Nakagawa and A. Mitani. “Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction”, Journal of the European Ceramic Society, 2008, 28(12): 2319-2324
  7. S. Ochiai, Y. Sakai, K. Kuhara, S. Iwamoto, J. J. Sha, “Analytical modeling of stress-strain behavior at 1873 K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction,” Composite Science and Technology, 67, 2007: 270-277
  8. J. J. Sha, T. Hinoki, and A. Kohyama, “Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures”, Journal of Materials Science, 42, 2007, 5046-5056
  9. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Bend stress relaxation of advanced SiC-based fibers and its prediction to tensile creep”, Mechanics of Materials, Vol.39(2), 2007: 175-182
  10. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Microstructural characterization and Fracture properties of advanced SiC fibers under loading,” Materials Science and Engineering: A, 2007, 456: 72-77
  11. J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Residual strain in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction and finite element analysis”, Collected in the Proceedings of the 16th International Conference on Composite Materials (ICCM-16), 2007, Kyoto, Japan
  12. J. J. SHA, T. Hinoki, and A. Kohyama, “Tensile properties and microstructure characterization of Hi-NicalonTM SiC fibers under loading,” International Journal of Fracture, Vol.142, 2006: 1-8
  13. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, Heat treatment effect on creep behavior of polycrystalline SiC-based fibers,” Materials Characterization, Vol.57 (1), 2006: 6-11
  14. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Strength and fracture properties of advanced SiC-based fibers”, Mechanics of Composite Materials, Vol.42, No.6, 2006: 527-534
  15. J. J. Sha, J. S. Park, T. Hinoki, A. Kohyama, J. Yu, “Tensile properties and creep behavior of SiC-based fibers under various oxygen partial pressures,” Materials Science forum, Vols.475-479, 2005: 1333-1336
  16. J. J. Sha, J. S. Park, T. Hinoki, A.Kohyama, “Hot corrosion,Oxidation and their effects on tensile strength of SiC fiber in alkaline melts,” Materials transaction, JIM, 46(5), 2005: 1032-35
  17. J. J. Sha, T. Nozawa, J. S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers,” Journal of Nuclear Materials, Vols.329-333, 2004: 592-596
  18. J. S. Park, Y. Katoh, A. Kohyama, J. K. Lee, J. J. SHA, H. K. Yoon, “Tailoring the microstructure of hot-pressed SiC by heat treatment,” Journal of Nuclear Materials, Vols.329-333, 2004: 558-561
  19. Gang YU, Xiaoqiang LI, Jianjun SHA et al., “Recoils spectrum and distribution in SiCf/SiC composites irradiated by neutrons,” Chinese Journal of Nuclear Science and Engineering, Vol.24, 2004: 139-143
  20. Gang Yu, Xiaoqiang Li, Jianjun Sha, et al, “Research on the performance and experimental energy calibration of charged particle spectrometer-identificator,” Chinese Journal of Nuclear Science and Engineering, Vol.24, 2004: 12-19
  21. J. J. Sha, T. Nozawa, J. S. Park, T. Hinoki, and A. Kohyama, “Tensile properties of SiC-based fibers under crept condition”, Proceedings of the 8th Japan-China Symposium on Materials for Advanced Energy Systems and Fission&Fusion Engineering, October 4-8, 2004 Sendai, JAPAN
  22. J. J. Sha, Y. Katoh, A. Kohyama, “Recent progress and critical issues of SiCf/SiC composite under irradiation environments,” Plasma Science&Technology, Vol.5, 2003: 1965-1975