基本情况
李强，吉林大学汽车工程学院教授。任吉林大学汽车工程学院教授，参加国家七五攻关项目、国家自然基金项目、吉林省科技厅青年基金和基础研究项目、国家863项目，以及横向科研项目等近20项。其中负责项目5项，其余为主要参加人。
研究领域
工业产品数字化造型设计、计算机图形学、计算机软件开发、2D影像处理和3D复杂曲面造型技术、逆向工程技术（包括造型和快速成型技术）
论文发表
-
Qiang Li, R. M. Newman, “An Approach from
2-D to 3-D for Automotive Styling”, Proceedings of the International Conference
on Mechanical Engineering and Mechanics (ICMEM2007), November 5-7, 2007 Wuxi,
China, Vol. 2, pp. 1841-1846. (ISTP)
-
Qiang Li, Xiang Lv, Ge Zhang, Changhai
Yang, “The Way of Automotive 3-D Styling Based on Digital Hand Sketching”,
Proceeding 2009 IEEE 10th International Conference on Computer-Aided Industrial
Design & Conceptual Design (CAID&CD 2009), November 26-29, Wenzhou,
China, pp. 933-937.(EI)
-
Qiang Li, Changhai Yang and R. M. Newman,
“Automotive Sketch Processing for Reverse Transformation into 3-D”, Proceeding
2009 IEEE 10th International Conference on Computer-Aided Industrial Design
& Conceptual Design (CAID&CD 2009), November 26-29, Wenzhou, China, pp.
1267-1272. (EI)
-
Qiang Li, Ling Yang, Dengfeng Wang, “The
Combination of Two Consecutive Strokes in Automotive Styling from 2-D to 3-D”,
2010 IEEE 11th International Conference on Computer-Aided Industrial Design
& Conceptual Design (CAID&CD 2010), November 17-19, Yiwu, China, pp.
1526-1531. (EI)
-
Qiang Li, Ling Yang, Dengfeng Wang, Maosen
Gao, “The Multi-Stroke Combination in the Automotive Styling from 2-D to 3-D”,
2010 IEEE 11th International Conference on Computer-Aided Industrial Design
& Conceptual Design (CAID&CD 2010), November 17-19, Yiwu, China, pp.
1401-1405. (EI)
-
Qiang Li, R. M. Newman and Changfu Zhao, “3-D
Coordinate Determination from 2-D Automotive Sketches: part1”, 2010
International Conference on Advanced Mechanical Engineering (AME2010),
September 4~5, Luoyang, China, Applied Mechanics and Materials Vols. 26-29
(2010) pp. 539-542, Trans Tech Publications, Switzerland,
doi:10.4028/www.scientific.net/ AMM.26-28.539. (EI)
-
Qiang Li, R. M. Newman and Shuaifeng Zhang,
“3-D Coordinate Determination from 2-D Automotive Sketches: part2”, 2010
International Conference on Advanced Mechanical Engineering (AME2010),
September 4-5, Luoyang, China, Applied Mechanics and Materials Vols. 26-29 (2010)
pp. 543-546, Trans Tech Publiccations, Switzerland, doi:10.4028/www.scientific.
net/AMM.26-28.543. (EI)
-
Qiang Li, Xi Wang, Nan Qi, Yanping Tang,
and R. M. Newman, “Surface Matching by Using the Simple Strategy in the
Application of Automotive Styling”, 2010 International Conference of
Information Science and Management Engineering (ISME 2010), August 7-8, Xian,
China, pp. 253-256. (EI)
-
Qiang Li, Yanping Tang, Nan Qi, Xi Wang,
and R. M. Newman, “Comparison of the Evolutionary Strategies for the Surface
Matching Based on Projective Area”, 2010 International Conference of
Information Science and Management Engineering (ISME 2010), August 7-8, Xian,
China, pp. 257-260. (EI)
-
Qiang Li and R. M. Newman, “Feature
Extraction from Automotive Sketch”, The journal of designing in China (中国设计学报),
2010, pp. 29-39