热处理工艺对GH4169G合金组织与性能的影响
Influence of Heat Treatment Technologies on Microstructure and Creep Properties of GH4169G Alloy
摘要: 通过对等温锻造GH4169G进行不同工艺的热处理和组织形貌观察，研究了热处理工艺对合金组织与蠕变性能的影响。结果表明，GH4169G合金经直接时效处理后的组织结构由γ基体、γ'、γ''及δ相组成，且晶粒尺寸约为10 μm~15 μm，并存在较多孪晶组织，其中，粒状δ相分布于晶内，而大量细小γ'和γ''强化相在晶内弥散析出，是使合金具有较好蠕变性能的主要原因。与直接时效处理合金相比，经标准热处理后，合金的晶粒尺寸无明显变化，组织结构仍由γ基体、γ'、γ''及δ相组成，但孪晶数量明显减少，且有块状和针状δ相沿晶界不连续析出，其中，元素Fe、Cr富集于近晶界区域，是使其δ相具有针状形态的主要原因。
Abstract: By means of heat treatment and microstructure observation, an investigation has been made into the influence of the heat treatement technologies on the microstructure of GH4169 alloy. Results show that, after the isothomal forged alloy is directly aged treated, microstructure of the alloy consists of the γ matrix,γ' and γ''phases, the size of the grains is about 10 - 15 μm, thereinto, significant amount of the particle-like δ precipitates are distributed within the grains, which is thought to be the main reason of the alloy possessing a better creep properties. Compared to the direct aged alloy, after standard heat treated, no change in the grains size and phases constituted is detected in the alloy, but the quantity of the twinning decreases, and some block-like and signficant amount of needle-like δ phase are precipitated along the boundaries, which is attributed to the effect of the elements Fe and Cr distributed in the boundaries region.
文章引用：刘臣, 田素贵, 曾征, 张超, 孙文儒. 热处理工艺对GH4169G合金组织与性能的影响[J]. 材料科学, 2012, 2(2): 72-76. http://dx.doi.org/10.12677/ms.2012.22013

参考文献

[1] W. D. Cao, R. L. Kennedy. Phosphorus-boron interaction in nickel base superalloy. In: R. D. Kissinger, et al., Ed., Superalloys 718, 625, 706 and various derivatives. TMS, 1994: 463-477.
[2] 胡壮麒, 孙文儒, 郭守仁, 卢德忠. 微量元素磷在铁镍基变形高温合金中的作用[J]. 中国有色金属学报, 2001, 11(6): 947- 959.
[3] 李荣斌, 姚枚, 刘文昌, 张伟红, 何贤昶. 直接时效工艺对INCONEL718合金的组织影响[J]. 金属学热处理, 2002, 27(2): 21-22.
[4] 孙永华, 李龙, 陈国胜等. 不同热处理工艺对GH4169合金组织与性能的影响[J]. 稀有金属材料与工程, 2010, 39(增刊1): 472-475.
[5] R. G. Appa, M. Srinivas and D. D. Sarma. Influence of modified processing on structure an properties of hot isostatically pressed superalloy Inconel 718. Materials Science and Engineering A, 2006, 418(1-2): 282-291.
[6] S. G. Tian, Z. G. Zhao, Y. Liu, X. Y. Bao, L. Q. Chen and X. H. Liu. Creep behaciors of DA casting and rolling GH4169 superalloy. Rare Metal Materials and Engineering, 2009, Suppl. 3: 20-23.
[7] W. Chen and M. C. Chaturvedi. Dependence of creep fracture of Inconel 718 on grain boundary precipitates. Acta Materials, 1997, 45(7): 2735-2746.
[8] 黄历锋. DA718合金中磷、硼的作用及机理研究[D]. 中国科学院金属研究所, 2007.
[9] 李娜, 郭守仁, 卢德忠, 孙文儒, 孟晓娜, 胡壮麒. 微量元素磷、硼对直接时效IN718合金持久蠕变性能的影响[J]. 金属学报, 2003, 39(12): 1255-1258.
[10] W. Chen, M. C. Chaturvedi. Effect of grain boundary precipitates on the creep behavior of Inconel 718. Materials Science and Engineering, 1994, 183(1-2): 81-89.
[11] 宋洪伟, 郭守仁, 卢德忠, 徐岩, 王玉兰, 胡壮麒. 磷对IN718合金蠕变性能的影响[J]. 材料研究学报, 1999, 13(5): 523-526.
[12] 宋洪伟, 郭守仁, 胡壮麒. 磷对IN718合金相得影响[J]. 金属学报, 1999, 35(10): 1024-1027.
[13] 郑磊, 徐庭栋, 邓群, 司红, 董建新. 高温合金GH4169 (IN718)中磷晶界偏聚特性的实验研究[J]. 金属学报, 2007, 43(8): 893-896.
[14] 刘奋成, 林鑫, 赵卫卫等. 固溶温度对激光立体成形GH4169高温合金组织和性能的影响[J]. 稀有金属材料与工程, 2010, 39(9): 1519-1524.
[15] 李振荣, 田素贵, 赵忠刚等. 热连轧GH4169合金组织结构与蠕变变形及断裂机制[J]. 沈阳工业大学学报, 2011, 33(6): 649-654.

为你推荐