维生系统PE管道安装工程施工技术研究
The Research of the Construction Technology of the Installation of Sustaining System PE Pipe
DOI: 10.12677/HJCE.2013.22024, PDF, HTML, XML, 下载: 3,021  浏览: 8,105 
作者: 白蓉:安徽理工大学,淮南、中国建筑第四工程局,广州;王成洋*:安徽理工大学,淮南;孙方荣, 管谈谈:中国建筑第四工程局,广州;施森芝:江苏省都市建筑设计研究院有限公司,宿迁
关键词: 维生系统PE管道热熔对接施工技术Sustaining System; PE Pipe; Hot Melt Butt; Construction Technology
摘要: 对海洋馆建设中的PE管道的安装特点的介绍,使我们明确了施工技术的要点,并结合工程实例,总结出了符合现场实际的施工工艺。这样既保证整个海洋馆管道的顺利安装,又能达到施工最优化的目地。该项新技术具有良好的发展前景和广泛的推广意义。
Abstract: Through the aquarium in the construction of PE pipe installation characteristic introduction, we have been clear about the main points of the construction technology. Combined with the engineering practice, we summarized the actual construction process. Not only ensure the aquarium pipeline smooth installation, but also achieve the objective of the construction optimization. The new technology has good development prospect and a wide range of significance for popularization.
文章引用:白蓉, 王成洋, 孙方荣, 管谈谈, 施森芝. 维生系统PE管道安装工程施工技术研究[J]. 土木工程, 2013, 2(2): 142-146. http://dx.doi.org/10.12677/HJCE.2013.22024

参考文献

[1] 刘鸿文. 材料力学[M]. 第4版, 北京: 高等教育出版社, 2004.
[2] 熊道华. PE管道性能及其使用范围分析研究[J]. 非开挖技术, 2008, 25(1-2): 154-156.
[3] GB/T 20674.1-2006, 塑料管材和管件聚乙烯系统熔接设备第1部分: 热熔对接[S]. 北京: 中国标准出版社, 2006.
[4] GB50010-2010, 混凝土结构设计规范[S]. 北京: 中国建筑工业出版社, 2010.
[5] 肖燕, 贾晓辉. 聚乙烯管管道电熔焊接[J]. 新型建筑材料, 2006: 15-17.
[6] GB/T13663-2000, 给水用聚乙烯(PE)管材[S]. 北京: 中国标准出版社, 2000.
[7] GB/T6111-2003, 长期恒定内压下热塑性塑料管材耐破坏时间的测定[S]. 北京: 中国标准出版社, 2003.
[8] TSG D2002-2006, 燃气用聚乙烯管道焊接技术安全规程[S]. 北京: 中国标准出版社, 2006.
[9] GB5024-2011, 混凝土结构工程质量验收规范[S]. 北京: 中国建筑工业出版社, 2011.