AZ80镁合金模锻汽车轮毂组织与性能研究
Research on Microstructure and Properties of Az80 Alloy Forged Wheel Hub
DOI: 10.12677/AMC.2014.22003, PDF, HTML,  被引量 下载: 3,068  浏览: 9,385 
作者: 吴 婧, 任凌宝, 权高峰, 张英波：西南交通大学材料科学与工程学院，成都
关键词: AZ80镁合金；模锻轮毂；微观组织；力学性能；Az80 Alloy； Forging Wheel Hub； Microstructure； Mechanical Properties
摘要: 本试验针对模锻AZ80汽车轮毂的轮芯、轮辐、轮缘和轮辋四个部位，分析其锻后的微观组织和力学性能。试验结果表明，经过此种模锻工艺后的汽车轮毂力学性能较成形前的AZ80镁合金有大幅度的提高，在扫描电镜下发现微观组织大量类似于珠光体构造方式的层片状组织，但经过微区成分分析，基体和片层组织的Mg、Al两种元素含量只出现了小范围波动。通过微观组织与力学性能的关系，为进一步优化工艺参数提供参考依据。 This experiment is focused on the microstructures and mechanical properties of four parts on AZ80 wheel: hub wheel core, spokes, outer rim and rim. The result shows that mechanical properties of AZ80 magnesium alloy have improved greatly after forging and a large amount of lamellar structure has been founded which is similar to the construction of pearlyte under the scanning electron microscopy. However, the elements of Mg and Al nearly keep unchanged in the EDS analysis. Studying on the relationship of microstructure and mechanical properties can provide a reference for optimizing process parameters.
文章引用：吴婧, 任凌宝, 权高峰, 张英波. AZ80镁合金模锻汽车轮毂组织 与性能研究 [J]. 材料化学前沿, 2014, 2(2): 13-20. http://dx.doi.org/10.12677/AMC.2014.22003

参考文献

[1] 陈振华, 等 (2004) 镁合金. 化学工业出版社, 材料科学与工程出版中心, 北京.
[2] 吕宜振 (2001) Mg-Al-Zn合金组织、性能、变形和断裂行为研究. 上海交通大学, 上海.
[3] 殷银银 (2010) 镁合金轮毂挤压工艺研究. 河南科技大学, 河南.
[4] Derby, B. (1991) The dependence of grain size on stress during dynamic recrystallization. Acta Metallurgica et Materialia, 39, 955-962.
[5] 陈振华, 等 (2005) 变形镁合金.化学工业出版社,材料科学与工程出版中心,北京.
[6] 陈振华, 杨春花, 黄长清, 等 (2006) 镁合金塑性变形中孪生的研究. 材料导报, 20,107-113.
[7] Nie, J.F., Zhu, Y.M., Liu, J.Z. and Fang, X.Y. (2013) Boundaries periodic segregation of solute atoms in fully coherent twin. Science, 340, 957.
[8] Zhao, Z., Yang, Y.-Q. and Zhang, Z.-M. (2008) Transformation mechanism of lamellar microstructure of AZ80 wrought Mg alloy during warm deformation. Transactions of Nonferrous Metals Society of China, 18, 156-159.
[9] Lai, W.-J., Li, Y.-Y., Hsu, Y.-F., Trong, S. and Wang, W.-H. (2009) Aging behavior and precipitate morphologies in Mg-7.7Al-0.5Zn-0.3Mn (wt.%) alloy. Journal of Alloys and Compounds, 476, 118-124.
[10] Prez-Prado, M.T., Del Valle, J.A. (2004) Microstructure evolution during large strain hot rolling of an AM60 Mg alloy. Scripta Materialia, 50, 661-665.