吸附法处理含Pb(Ⅱ)废水的研究进展
Research Advances of Pb(Ⅱ) Contaminated Wastewater Treatment by Adsorption Method
DOI: 10.12677/AEP.2014.42006, PDF, HTML,  被引量 下载: 2,944  浏览: 8,904  国家科技经费支持
作者: 刘日辉, 姜彬慧, 陈江伟, 邓 烁:东北大学,沈阳
关键词: Pb(Ⅱ)吸附废水处理Pb(Ⅱ); Adsorption; Wastewater Treatment
摘要: 水体中的Pb2+污染对人体健康及生态系统都有着严重危害,含Pb2+废水的处理已经越来越受到人们的关注。吸附法是指利用吸附剂与杂质、色素物质、有毒物质、产品之间分子引力的差异,从而起到分离净化作用方法。本文对吸附法去除重金属Pb2+污染的研究和应用现状进行了综述,首先简要介绍了吸附法除Pb2+的特点,重点综述了活性炭、天然有机吸附剂、天然无机吸附剂和合成吸附剂去除Pb2+的性能、特点和研究进展。其次对吸附剂吸附Pb2+的影响因素、吸附机理、吸附等温式和吸附动力学模型等进行概述。吸附法去除重金属的原理主要是通过表面吸附、表面沉积、离子交换或静电吸引。论文最后提出通过改性制备高效吸附剂和加强对吸附剂解吸作用的研究等建议
Abstract: Pb2+ pollution in water exerts great risks on human health and ecosystem, and Pb2+ pollution prevention has been recognized as a globally environmental challenge. Therefore, the removal of Pb2+ from contaminated water has been brought into focus around the world. Adsorption method refers to the use of adsorbent and impurities, pigment substances, toxic sub-stances and product difference between molecular attractions, thus it plays the role of separation and purification method. In this paper, the sorbents widely used for heavy metal Pb2+ removal are reviewed at first. The principle and characteristics of adsorption were briefly introduced, and the performance, the features and the corresponding research advance of various kinds of Pb2+ adsorbents including active carbon, natural organic adsorbents, natural inorganic adsorbent and synthetic adsorbent are systemically reviewed. The sorption performance, influencing factors, mechanisms, pretreatment and modeling of sorption (isotherm and kinetic models) have been discussed in detail. The recommendations of making efficient adsorbent by modification and enhancing the research of the adsorbent desorption effect were proposed at the end.
文章引用:刘日辉, 姜彬慧, 陈江伟, 邓烁. 吸附法处理含Pb(Ⅱ)废水的研究进展[J]. 环境保护前沿, 2014, 4(2): 32-39. http://dx.doi.org/10.12677/AEP.2014.42006

参考文献

[1] 王豫 (2010) 浅谈食品中重金属对人体的危害及预防. 青海农技推广, 4, 8-16.
[2] 章有余 (1997) 环境铅对儿盆健康的危害. 四川环境, 4, 29-34.
[3] 张少峰, 胡熙恩 (2003) 含铅废水处理技术及其展望. 环境污染治理技术与设备, 11, 68-71.
[4] Christensen, J., Christensen, S. and Izatt, R. (1983) Effect of receiving phase anion on macrocycle-mediated cation transport rates and selectivies in water-toluene-water emulsion membranes. Separation Science and Technology, 18, 363-373.
[5] Bissen, M. and Frimmel, F.H. (2003) Arsenic—A review. Part II: Oxidation of arsenic and its removal in water treatment. Acta Hydrochimica et Hydrobiologica, 31, 97-107.
[6] Zouboulis, A.I., Rousou, E.G., Matis, K.A. and Hancock, I.C. (1999) Removal of toxic metals from aqueous mixtures. Part 1: Biosorption. Journal of Chemical Technology and Biotechnology, 74, 429-436.
[7] Ponce De Leon, C. and Pletcher, D. (1996) The removal of Pb2+ from aqueous solutions using a reticulated vitreous carbon cathode cell—The influence of the electrolyte medium. Electrochim Acta, 41, 533-541.
[8] 刘延慧 (2011) 活性炭吸附处理含铅废水的研究. 重庆科技学院学报, 2, 84-99.
[9] 李鱼, 王晓丽, 陈昕, 等 (2005) 湿地水环境中表层沉积物吸附铅、镉能力的研究. 吉林大学学报(地球科学版), 2, 231-234.
[10] 赵振, 许中坚, 邱喜阳, 等 (2012) 阴–阳离子有机膨润土制备及其对铅离子的吸附. 环境工程学报, 12, 4406-4411.
[11] 李鱼, 刘亮, 董德明, 等 (2003) 有机氯类农药对自然水体生物膜吸附Pb,Cd能力的影响. 自然科学进展, 8, 866-869.
[12] 宋金如, 罗明标, 王黎 (2006) 凹凸棒石吸附铅的性能及含铅废水处理研究. 东华理工学院学报, 1, 74-79.
[13] 韦平英, 等 (2003) 板蓝根药渣对低浓度含铅废水的吸附特性研究. 离子交换与吸附, 4, 351-356
[14] 王翠苹, 等 (2011) 电气石和微生物对水溶液中铅吸附研究. 环境科学与技术, 7, 12-30.
[15] 李方文, 等 (2002) 煅烧–碱溶法制粉煤灰类沸石吸附剂及其在处理含铅废水中的应用. 环境污染治理技术与设备, 10, 61-67.
[16] 赵巍 (2009) 水钠锰矿吸附Pb2+微观机理的研究. 博士论文, 华中农业大学, 武汉.
[17] 张敬, 华张宏 (2008) AAS法研究啤酒酵母对Pb2+的生物吸附作用. 天中学刊, 5, 29-32.
[18] 尹利利, 臧淑艳, 侯雪敏, 等 (2013) 黑曲霉对含铅废水的生物吸附研究. 沈阳化工大学学报, 1, 15-19.
[19] 李国新, 张丹丹, 颜昌宙, 等 (2011) 轮叶黑藻对铅的吸附特征及生物吸附机理研究. 中国环境科学, 8, 13271333.
[20] 孙文田 (2008) 剩余活性污泥吸附铅、铬特征的比较研究. 硕士论文, 吉林大学, 长春.
[21] 龚仁敏, 等 (2004) 天然和预处理的极大螺旋藻粉对铅的吸附. 南京农业大学学报, 3, 107-110.
[22] 蒋元继, 唐亚, 刘本洪, 等 (2010) 香菇菌渣吸附水溶液中重金属铅的研究. 西南农业学报, 5, 1615-1619.
[23] 佘亮 (2012) Fe3O4/4A沸石复合材料的制备及吸附铅离子性能的研究. 硕士论文, 中南大学, 长沙.
[24] 高凯莎 (2012) 改性复合高吸水树脂的合成及吸附铅离子的性能. 硕士论文, 燕山大学, 秦皇岛.
[25] 宋庆平, 王崇侠 (2013) 交联羧甲基壳聚糖对铅离子的吸附研究. 化学研究与应用, 4, 541-546.
[26] 杜秀娟, 曹吉林, 陈学青, 等 (2012) 聚丙烯酰胺–钠基复合膨润土合成及其吸附铅离子性能. 过程工程学报, 2, 324-329.