某型发射架检测仪方案设计与实现
The Design and Implementation of a Type of Launcher Tester
DOI: 10.12677/MOS.2014.32007, PDF, HTML, 下载: 2,663  浏览: 7,126 
作者: 张志虎, 张少贤, 李明哲, 孙德明, 邓江华:陆军航空兵学院,北京;张立新:95903部队,武汉
关键词: 武器发射发射架检测仪方案设计Weapon Firing Launcher Tester Design
摘要: 某型发射架检测一直是与武器系统联机后加电进行检测,本方案设计使某型发射架能够在脱离实装武器系统情况下进行独立检测。不受场地、环境限制,并能够快速定位发射架故障通路,检测一个发射架所需时间约是过去的1/8,使用方便,安全可靠。按本方案研制的某型发射架检测仪,通过实际使用,取得较好的效果。
Abstract: The missile launcher needs to be connected to the weapon system on helicopter if a test for the launcher is performed by an old tester. This scheme designs a new type of tester which is able to test the missile launcher without connecting the real weapon system. The testing is not subjected to the constraints of sites and environment. It can quickly locate the fault pathway of launcher. The required time for testing is about 1/8 of the past. It is easy to use, safe and reliable. According to this design, a new launcher tester is developed and has achieved the good effect through practice.
文章引用:张志虎, 张少贤, 李明哲, 张立新, 孙德明, 邓江华. 某型发射架检测仪方案设计与实现 [J]. 建模与仿真, 2014, 3(2): 44-49. http://dx.doi.org/10.12677/MOS.2014.32007