IRIG106标准在高速模拟数据记录中的应用
Application of IRIG106 Standard in High-Speed Analogy Data Recording
摘要:
IRIG106第10章采集记录标准是国际公认的采集记录标准,但是采用IRIG106标准记录高速模拟量数据时经常存在用于存储记录格式的数据量过大的问题,极端情况下存储记录格式的数据量是有意义的记录数据量的15倍以上。为解决该问题,本文根据高速模拟量数据采集的特点,通过在采集电路增加缓冲区,采取数据多次采集、集中记录的方式,减少了记录格式产生的数据量,节约了记录数据的存储空间。经过分析该方法可以极大的减少记录格式引起的存储开销,当采集频率为16 KHz时格式存储开销可控制到净数据量的1%以下。
Abstract:
Digital recording standard in IRIG106 chapter 10 is acknowledged internationally, however, memory used for format data usually was huge in high-speed analog signal recording when IRIG106 was adapted, and the format data could be 15 times as much as valuable data in extreme case. In order to solve the problem of format data amount, sampling more than once and recording in batches through additional cache in sampling circuit was adapted based on the specialty of high- speed analog signal sampling, which decreased storage memory of recording data. Storage cost of format data could be cut down sharply by using this method, and by taking the sampling frequency of 16 kHz as an example, we can find the net format data could be less than 1% of valuable data.
参考文献
[1]
|
宋方伟, 王能, 聂诗良. IRIG106数字记录标准研究[J]. 兵工自动化, 2009(10): 59-61.
|
[2]
|
袁炳南, 霍朝晖, 白效贤. 航空飞行试验遥测标准概况[J]. 测控技术, 2010(11): 10-14.
|
[3]
|
曹阳, 陆乐. 基于IRIG106 Chapter 10标准的数据记录系统[J]. 航空电子技术, 2014(2): 14-17, 34.
|
[4]
|
李宏伟, 张华栋, 山鹏. 基于美军新版IRIG106标准的靶场遥测技术分析[J]. 飞航导弹, 2013(8): 54-57.
|
[5]
|
宋政斌, 张国旺. 基于IRIG106固态记录器记录标准的PCM数据处理技术研究[J]. 计算机测量与控制, 2014(2): 531-533.
|