机械工程与技术  >> Vol. 4 No. 4 (December 2015)

轧辊表面毛化应力的数值模拟与研究
Numerical Simulation and Study of Stress for Rolling Textured Surface

DOI: 10.12677/MET.2015.44029, PDF, HTML, XML, 下载: 1,653  浏览: 4,662  科研立项经费支持

作者: 卫芳芳*, 张少睿:上海交通大学机械工程与动力学院,上海

关键词: 带钢轧制有限元模拟轧辊表面毛化应力Band Steel Rolling Finite Element Simulation Texturing on the Surface of Rolls Stress

摘要: 采用ANSYS有限元方法模拟带钢轧制过程,获得轧辊受力工况,对轧辊表面的半球形结构与复合镀层中材料的变形情况进行评估。分析了带钢牵引速度对带钢表面形貌形成及成形质量的影响规律,轧辊过渡层厚度、轧辊表面形貌对毛化球应力的影响规律。研究结果将为研究毛化轧辊表面特性提供理论依据。
Abstract: The band steel rolling process was simulated with ANSYS finite element simulation method. The rolling force working conditions were obtained and the hemispherical structure and the composite coating material deformation on the surface of rolling were evaluated. Further, the influence of band steel drawing velocity on the formation of the band steel surface morphology and forming quality was analyzed. The influences of transition story thickness and rolling surface morphology on the texturing ball stress were analyzed. Research results would provide theoretical basis for studying the characteristics of the textured rolls surface.

文章引用: 卫芳芳, 张少睿. 轧辊表面毛化应力的数值模拟与研究[J]. 机械工程与技术, 2015, 4(4): 254-260. http://dx.doi.org/10.12677/MET.2015.44029

参考文献

[1] 今中诚. 薄钢板表面粗糙度与成形性能关系的研究[J]. 汽车工艺与材料, 1997(9): 22-27.
[2] 周家琮. 冷轧轧辊毛化技术[J]. 钢铁钒钛, 1996, 17(3): 1-9.
[3] Iwadoh, S., Kuwamoto, H. and Sonoda, S. (1989) An Investigation of the Mechanism of Work Roll Wear in Cold Rolling. Tetsu-to-Hagane (Journal of Iron and Steel Institute of Japan), 75, 2059-2066.
[4] Du, D., He, Y.F., Sui, B., et al. (2005) Laser Texturing of Rollers by Pulsed Nd:YAG Laser. Journal of Materials Processing Technology, 161, 456-461.
http://dx.doi.org/10.1016/j.jmatprotec.2004.07.083
[5] Li, Z., Yang, M.J., Liu, W., et al. (2006) Investigation on Crater Morphology by High Repetitive Rate YAG Laser- Induced Discharge Texturing. Surface and Coatings Technology, 200, 4493-4499.
http://dx.doi.org/10.1016/j.surfcoat.2005.03.001
[6] 刘红斌, 万大平, 胡德金. 激光毛化表面温度与应力的数值模拟与实验研究[J]. 材料热处理学报, 2008, 29(4): 181-184.