材料科学  >> Vol. 6 No. 2 (March 2016)

多次补焊对30CrMnSi钢焊接接头组织与性能的影响
Influence of Multiple Repair Welding on Microstructure and Properties of 30CrMnSi Steel Welded Joints

DOI: 10.12677/MS.2016.62014, PDF, HTML, XML, 下载: 1,406  浏览: 2,413 

作者: 马 林:中国人民解放军驻320厂军代表室,江西 南昌;肖 熙:洪都航空工业集团有限公司,江西 南昌;夏 春:南昌航空大学,江西 南昌

关键词: 30CrMnSi钢多次补焊组织性能30CrMnSi Steel Multiple Repair Welding Microstructure Properties

摘要: 以焊缝中心连续气孔为代表,研究了多次补焊对30CrMnSi钢TIG焊接头组织与性能的影响。结果表明,由于多次补焊对焊接接头的重复热作用,导致完全淬火区晶粒粗化、不完全淬火区回火软化,使焊接接头力学性能下降,一、二、三次补焊接头的抗拉强度相比焊接接头分别降低了8.5%、15%和19.8%。
Abstract: In this paper, the influence of multiple repair welding on the microstructure and properties of 30CrMnSi steel welded joints was studied, and the continuous porosity in the weld center was taken as the representative. The results indicate that the grain coarsening in the complete quenching zone and tempering softening in the incomplete quenching zone occur, due to the repeated thermal effect of the multiple repair welding on the welded joints. As a result, the mechanical properties decrease, and the tensile strength of the welded joints for once, twice and three times repair welding decreases by 8.5%, 15% and 19.8% respectively, comparing with the non- repair welding.

文章引用: 马林, 肖熙, 夏春. 多次补焊对30CrMnSi钢焊接接头组织与性能的影响[J]. 材料科学, 2016, 6(2): 110-114. http://dx.doi.org/10.12677/MS.2016.62014

参考文献

[1] 刘会杰, 闫久春, 魏艳红, 等. 焊接冶金与焊接性[M]. 北京: 机械工业出版社, 2007.
[2] 邹增大, 李亚江, 尹士科, 等. 低合金调质高强度钢焊接及工程应用[M]. 北京: 化学工业出版社, 2000.
[3] 朱援祥, 张小飞, 杨兵, 等. 基于有限元的多次补焊焊接残余应力的数值模拟[J]. 焊接学报, 2002, 23(1): 65-68.
[4] 李丹丹, 张志毅, 史春元. 多次补焊对SMA490BW钢焊接过热区冲击性能的影响[J]. 热加工工艺, 2011, 40(17): 161-166.
[5] 汪之平, 付宁宁, 隋显庭, 等. 多次补焊对5083-H111铝合金焊接接头组织与性能的影响[J]. 电焊机, 2014, 44(6): 130-134.
[6] 李建萍, 陶智俊, 夏春, 等. 随焊红外照射对30CrMnSi钢焊接接头组织与性能的影响[J]. 南昌航空大学学报(自然科学版), 2015, 29(1): 61-65, 88.