大型薄壁舱体自动钻铆装备故障树分析
Fault Tree Analysis of Automatic Drill-Riveting Equipment in Large Thin-Wall Cabin
DOI: 10.12677/MET.2017.63029, PDF, HTML, XML, 下载: 1,277  浏览: 2,525  国家科技经费支持
作者: 钟益平, 钟珂珂：上海航天精密机械研究所，上海；高通, 巴怡曼：西安电子科技大学机电工程学院，陕西 西安
关键词: 故障树；故障模式；自动钻铆装备；重要度；Fault Tree； Failure Mode； Automatic Drill-Riveting Equipment； Importance
摘要: 大型薄壁舱体自动钻铆装备是用于航空航天工业中运载火箭铆接舱的一种钻铆装备。本文针对自动钻铆装备的故障进行分析，了解引起其故障发生的根本原因，并基于此建立了该装备的故障树；通过对该装备故障树的定性分析和定量分析确定装备的薄弱环节，为自动钻铆装备的维修和优化设计提供理论支持。
Abstract: Automatic drill-riveting equipment in Large Thin-wall Cabin is used for the cabin of a launch vehicle in aerospace industry. In this paper, the faults of Automatic drill-riveting equipment are analyzed. Then the root causes of faults are analyzed. Based on this, the fault tree is established. The weaknesses of equipment are found out by qualitative and quantitative analyses of the fault tree, which can provide theoretical support for Maintenance and optimal design of the equipment.
文章引用：钟益平, 高通, 巴怡曼, 钟珂珂. 大型薄壁舱体自动钻铆装备故障树分析[J]. 机械工程与技术, 2017, 6(3): 227-239. https://doi.org/10.12677/MET.2017.63029

参考文献

[1] Chanda, R.S. and Bhattacharjee, P.K. (1995) A Reliability Approach to Transmission Expansion Planning Using Minimal Cut Theory. Electric Power Systems Research, 33, 111-117.
https://doi.org/10.1016/0378-7796(95)00937-D
[2] Rauzy, A. (1996) A Brief Introduction to Binary Decision Diagrams. Journal Européen Des Systèmes Automatisés Hermes, 4, 206-207.
[3] Bartlett, L.M. and Andrews, J.D. (2001) Comparison of Two New Approaches to Variable Ordering for Binary Decision Diagrams. Quality and Reliability Engineering International, 17, 151-158.
https://doi.org/10.1002/qre.406
[4] Liu, T.S. and Chiou, S.B. (1997) The Application of Petri Nets to Failure Analysis. Reliability Engineering & System Safety, 57, 129-142.
https://doi.org/10.1016/S0951-8320(97)00030-6
[5] 申桂香, 李怀洋, 张英芝, 等. 刀库故障重要度分析与可靠性改进设计[J]. 重庆大学学报, 2013, 36(6): 70-75.
[6] 叶伯生, 黄增双, 李斌. 故障树分析法在数控机床故障诊断系统中的应用[J]. 机械设计与制造, 2006(8): 135-137.
[7] 陈传海, 杨兆军, 陈菲, 等. 基于BDD技术的数控机床故障树分析[J]. 工程与试验, 2010, 50(3): 13-16.
[8] 于捷, 孙立大, 石耀霖, 等. 基于BDD技术下的数控机床转塔刀架系统重要度分析[J]. 机床与液压, 2009, 37(1): 157-161.
[9] 苏凡囤, 袁博, 张琦, 等. 基于FTA的轮式推土机液压系统故障模式研究[J]. 中国工程机械学报, 2012, 10(1): 105-111.
[10] 谢里阳. 机械可靠性基本理论与方法[M]. 北京: 科学出版社, 2012.
[11] 胡俊, 贠瑞光, 杨丽伟, 等. 电牵引采煤机液压制动系统的故障树分析[J]. 矿山机械, 2011, 39(1): 9-12.
[12] 张龙, 熊国良, 何柏林, 等. 机床液压系统故障树分析[J]. 机床与液压, 2005(2): 170-171+185.

为你推荐