运载火箭筒体壳段数字化柔性铆接装配生产线构建技术研究
Research on Building Technology of Digital Flexible Riveting Assembly Line for Launch Vehicle Shell Products
摘要:
本文针对运载火箭筒体壳段的装配过程，进行了数字化柔性装配生产线构建技术研究。通过构建生产线的运行管理框架，优化工艺流程和工艺布局，结合信息化手段及数字化工艺设计、制造、检测方法及设备，构建了运载火箭筒体壳段装配生产线。并通过实例验证，验证了方案的可行性。
Abstract:
According to the assembly process of Launch Vehicle Shell Products, building technology of Digital Flexible Riveting Assembly Line was studied. By building the operation and management frame-work, optimizing process and layout, combining information method, digital process design, man-ufacturing and inspection process technology, the Digital Flexible Riveting Assembly Line For Launch Vehicle Shell Products are built. At last, a case was studied to show the feasibility of the configuration.
参考文献
|
[1]
|
陈绍文, 王巧, 孙巧棚. 精益制造和飞机移动式装配线[J]. 航空制造技术, 2011(16): 34-37.
|
|
[2]
|
刘炜, 刘峰, 倪阳咏, 白雪, 李霏. 航天复杂产品智能化装配技术应用研究[J]. 宇航总体技术, 2018(1): 33-37.
|
|
[3]
|
黄鸣, 薛善良, 马继红, 李建平, 杨年宝. 航天产品精益装配平台集成技术研究[J]. 中国制造业信息化, 2012(17): 13-17.
|
|
[4]
|
郭洪杰. 飞机数字化柔性装配生产线关键技术[J]. 航天制造技术, 2011(7): 40-43.
|
|
[5]
|
蒋丹鼎. 航天复杂产品数字化生产线的研究与应用[J]. 航天制造技术, 2011(6): 33-36.
|
|
[6]
|
侯东旭, 李聪颖, 朱建文. 运载火箭壳段自动钻铆仿真及工艺流程优化[J]. 航天制造技术, 2016(1): 28-32.
|