叠堆式压电陶瓷基本特性实验研究
Experimental Study of the Main Characteristics of Stacked Type Piezoelectric Materials
DOI: 10.12677/MET.2012.13006, PDF, HTML, 下载: 3,607  浏览: 11,109  国家自然科学基金支持
作者: 麻玉川*, 合 烨*, 陈小安*：重庆大学机械传动国家重点实验室
关键词: 叠堆式压电陶瓷(PZT)；作动器；静态特性；动态特性；迟滞；PZT; Actuator; Static Characteristics; Dynamic Characteristics; Hysteresis
摘要: 本文针对应用于高速电主轴振动主动控制的叠堆式压电陶瓷(PZT)作动器进行实验测试和分析。主要测试了其基本特性，包括自由状态下的输出位移，不同压力下的输出位移，蠕变特性，PZT的迟滞特性；为主动控制系统提供基础数据。实验结果显示输出特性和外加负载的关系：合适压力下叠堆式压电陶瓷作动器输出位移最大，随着负载压力的增大位移输出迟滞度有一定程度的减小，但是过大的压力会导致输出位移的减小，其在恒定压力下的线性度优于弹性预压力下的线性度；其动态性能满足控制系统的要求。为后续研究提供了科学依据。
Abstract: In this paper, the stacked piezoelectric actuator which is used in the main spindle vibration suspension were tested and analyzed. The static displacement with variety pressure, creep characteristics. Hysteresis characteristics of PZT were tested to provide data for the active vibration control system. The results show that this kind of materials will output the largest displacement with a proper force exerted on it. The hysteresis phenomena will be relieved while the force gains. However, its displacement will be reduced at the same time. The linearity of PZT under static pressure is better than it under elastic preload. These outcomes provide a scientific grounding for the follow up study.
文章引用：麻玉川, 合烨, 陈小安. 叠堆式压电陶瓷基本特性实验研究[J]. 机械工程与技术, 2012, 1(3): 30-36. http://dx.doi.org/10.12677/MET.2012.13006

参考文献

[1] G. B. Song, J. Vlattas, S. E. Johnson and B. N. Agrawal. Active vibra-tion control of a space truss using PZT stack actuator. Adaptive Struc-tures and Materials Systems, 1999, 59: 263-268.
[2] J. L. Dohner, T. D. Hinnerichs, J. P. Lauffer, et al. Active chatter control in a milling machine. Proceedings of SPIE, Smart Struc- tures and Materials, In-dustrial and Commercial Applications of Smart Structures Technolo-gies, 23 March 1997: 281-294.
[3] G. Pinte, S. Devos, B. Stallaert, et al. A piezo-based bearing for the active structural acoustic control of rotating machinery. Jour- nal of Sound and Vibration, 2010, 329(2010): 1235-1253.
[4] 李国荣, 陈大任, 殷庆瑞. PZT系多层片式压电陶瓷微驱动器位移性能研究[J]. 无机材料学报, 1996, 14(3): 419-424.
[5] 郑凯, 阎绍泽, 温诗铸. 预压力对压电叠层作动器性能的影响[J]. 压电与声光, 2003, 25(5): 363-365.
[6] 欧进萍. 结构振动控制[M]. 北京: 科学出社, 2003.
[7] Q. C. Xu, Yoshikawas, J. R. Belsick, et al. Piezoelectric com- posites with high sensitivity and high capacitance for use at high pressures. Transaction on Ultrasonics Ferroelectrics and Fre- quency Control, 1991, 38(6): 634-639.
[8] 崔玉国, 孙宝元, 董维杰等. 压电陶瓷执行器迟滞与非线性成因分析[J]. 光学精密工程, 2003, 11(3): 270-275.
[9] 王宏亮, 崔红娟, 陈志华. 压电陶瓷驱动微位移机构迟滞非线性改善方法研究[J]. 压电与声光, 2007, 10: 4-7.
[10] 张涛, 孙立宁, 蔡鹤皋. 压电陶瓷基本特性研究[J]. 光学精密工程, 1998, 6(5): 26-32.

为你推荐